Prototyping

Displaying 1 to 50 (of 95 products)

1 2 [Next >>]

Product Image	Item Name-	Price
	2mm 10pin XBee Header Description: This is a 10-pin header with 2mm pitch that mates with our XBee socket. It can be used for making 'dummy XBees' or anything else you...	$0.95
	2x3 Pin Shrouded Header Description: Simple shrouded 6-pin connector. Good for preventing cable connection mishaps. Use for programming, data, power, or any other kind of...	$1.50
	4 Pin Molex Connector - Pigtail Development: The 4-pin Molex connector is pretty standard for disk drives and things like that but it's also a great general purpose power connector....	$0.95
	4-channel I2C-safe Bi-directional Logic Level Converter - BSS138 Description: Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many...	$3.95
	Adafruit Perma-Proto 1/4 sized Breadboard PCB - 3 Pack! Description: Adafruit says "Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: its always crummy...	$8.95
	Adafruit Perma-Proto Full-sized Breadboard PCB - 3 Pack! Description: Adafruit says "Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: its always crummy...	$19.95
	Adafruit Perma-Proto Half-sized Breadboard PCB - 3 Pack! Description: Adafruit says "Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: its always crummy...	$12.50
	Adafruit Perma-Proto Super Pack! Description: Pick up a super pack of our Perma-Proto PCBs, perfect for professional prototyping projects! This super pack contains 3 each of our 3...	$34.95
	Alligator Test Leads - Multicolored 10 Pack Description: Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench...	$2.95
	ATMEGA32U4 Breakout Description: The ATMega 32U4 is an 8-bit AVR microcontroller featuring 32KB self-programming flash program memory, 2.5KB SRAM, 1KB EEPROM and a...	$19.95
	Barrel Jack to 2-pin JST Description: Two pin JST connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a...	$2.95
	Beginner Parts Kit Description: This is the new revision of the kit. SparkFun switched to a better trimpot and green LED. This is a kit that gives you all of the basic...	$24.95
	Binding Post - Black Description: This is a black insulated binding post. These binding posts do accept banana plugs, and are a great way to connect single-wire leads....	$0.35
	Binding Post - Red Description: This is a red insulated binding post. These binding posts do accept banana plugs, and are a great way to connect single-wire leads. The...	$0.35
	Break Away Female Headers - Swiss Machine Pin Description: Single row of 30-holes, female header with swiss round machined pins. These units have very high quality round pins to accept and retain...	$3.95
	Copper Tape - 2" (50ft) Description: Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and...	$14.95
	Copper Tape - 5mm (50ft) Description: Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and...	$2.95
	Heat Shrink Retail Description: We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections, protect devices, and electrically...	$8.95
	High Temperature Adhesive Tape - (1cm, 33m) Description: This is a 33 meter roll of polyimide tape. This tape is a fantastic insulator, like electrical tape, but it can withstand temperatures...	$4.95
	Hook-up Stranded Wire - Black Description: Standard 22 AWG stranded black wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools...	$2.50
	Hook-up Stranded Wire - Red Description: Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of...	$2.50
	Hook-up Stranded Wire - White Description: Standard 22 AWG stranded white wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools...	$2.50
	Hook-Up Wire - Assortment (Solid Core) Description: An assortment of colored wires: you know it's a beautiful thing. Six different colors of solid core wire in a cardboard dispenser box....	$16.95
	Hook-up Wire - Black Description: Standard 22 AWG solid Black hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small...	$2.50
	Hook-up Wire - Brown Description: Standard 22 AWG solid brown hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small...	$2.50
	Hook-up Wire - Grey Description: Standard 22 AWG solid Grey hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small...	$2.50
	Hook-up Wire - Red Description: Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small...	$2.50
	Hook-up Wire - White Description: Standard 22 AWG solid White hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small...	$2.50
	Hook-up Wire - Yellow Description: Standard 22 AWG solid Yellow hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small...	$2.50
	JST Jumper 2 Wire Assembly Description: This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on...	$0.95
	JST Jumper 3 Wire Assembly Description: This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on...	$1.50
	JST Jumper 4 Wire Assembly Description: This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on...	$1.50
	Jumper Wire - JST 4-Pin Description: This is a great cable if you need to work with the SMD JST connectors. Gives you four wires to work with. We use this cable for the USB...	$1.50
	Jumper Wire - JST to Molex Description: This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, 2-pin Molex 0.1" pitch polarized...	$1.50
	Jumper Wires Premium 6" F/F Pack of 10 Description: These are 155mm (6”) long jumpers with female connectors on both ends. Use these to jumper from any male header on any board, to any...	$3.95
	Jumper Wires Premium 6" M/M Pack of 10 Description: These are 155mm (6”) long jumpers with male connectors on both ends. Use these to jumper from any female header on any board, to any...	$3.95
	Jumper Wires Standard 7" M/M Pack of 30 Description: If you need to knock up a quick prototype there's nothing like having a pile of jumper wires to speed things up, and let's face it:...	$4.95
	LED Holder - 10mm Description: These plastic LED holders have a slick chrome finish and make it possible to panel-mount your indicator lights for a clean look. These...	$0.50
	LED Holder - 5mm Description: These plastic LED holders have a slick chrome finish and make it possible to panel-mount your indicator lights for a clean look. These...	$0.50
	Molex Jumper 2 Wire Assembly Description: This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector...	$0.95
	MonoAmp - Sound Amplifier Retail Description: This tiny audio amplifier is based on the Texas Instruments TPA2005D1. Its efficient class-D operation means low heat and long battery...	$8.95
	NCP1402-5V Step-Up Breakout Description: The NCP1402 is a 5V DC-DC converter. This breakout board will accept voltage inputs between 1 and 4 Volts and output a constant, low...	$5.95
	OBD-II to DB9 Cable Description: Once you've hacked everything, why not go out in the garage and hack your car? This cable allows you to access the pins on your car's...	$9.95
	Polymorph - 1000g Description: Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be...	$34.95
	Polymorph - 250g Description: Polymorph is a non-toxic, biodegradable polyester with a low melting temperature of about 60°C (140°F). Prototype plastic parts can be...	$9.95
	Pro Micro - 3.3V/8MHz Description: The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB...	$24.95
	Pro Micro - 5V/16MHz Description: The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB...	$24.95
	Ribbon Crimp Connector - 10-pin (2x5, Female) Description: These 2x5 crimp connectors can be snapped onto 10-wire ribbon cable to make your own cable assemblies and keep your connections...	$0.50
	Ribbon Crimp Connector - 6-pin (2x3, Female) Description: These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections...	$0.35
	Screw Terminals 3.5mm Pitch (3-Pin) Description: Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any...	$1.50