| Product Image |
Item Name- |
Price |
 |
Description: 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4"... |
$7.95
|
 |
New! Version 3 comes with the latest module which has external antenna support and Pulse-Per-Second output We carry a few different GPS modules... |
$39.95
|
 |
Description: The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with Sparkfun's Arduino Pros and... |
$39.95
|
 |
Description: This is a simple breakout for the Roving Networks Bluetooth module. All pertinent pins are broken out and labeled. This new version's... |
$59.95
|
 |
Description: This module from Roving Networks is powerful, small, and very easy to use. This Bluetooth module is designed to replace serial cables.... |
$15.95
|
 |
Description: The FTDI cable is a USB to Serial (TTL level) converter which allows for a simple way to connect TTL interface devices to USB. The I/O... |
$17.95
|
 |
The TTL-232R-3V3 is a USB to Serial (TTL level) converter cable which allows for a simple way to connect TTL interface devices to USB. This version... |
$23.95
|
|
The new TTL-232R is a USB - TTL serial converter cable which will allow for a simple way to connect TTL level devices to USB. The TTL-232R uses a... |
$23.95
|
 |
Description: This is a more universal GPS breakout board that uses a vertical SMD connector for any of the EM401 or EM406 GPS module cables that we... |
$3.95
|
 |
Description: This connector cable interfaces UFL RF connectors to RP-SMA antennas. Use it to attach any standard RP-SMA 2.4GHz antenna to the DPAC... |
$4.95
|
 |
Description: The is a breakout board for the popular XBee modules. Board includes easy-to-sew tabs and all the necessary power regulation to run on... |
$14.95
|
 |
Description: This board allows you to interface with your car's OBD-II bus. It provides you a serial interface using the ELM327 command set and... |
$49.95
|
 |
Description: These wireless receivers work with our 315MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to... |
$4.95
|
 |
Description: These wireless receivers work with our 434MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to... |
$4.95
|
 |
Description: These wireless transmitters work with our 315MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to... |
$3.95
|
 |
Description: These wireless transmitters work with our 434MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to... |
$3.95
|
 |
Description: The smallest, most powerful, and most versatile GPS receiver we carry just got more powerful.The Venus638FLPx is the successor to the... |
$59.95
|
 |
Description: This is the XBee XB24-Z7CIT-004 module from Digi. Series 2 improves on the power output and data protocol. Series 2 modules allow you to... |
$25.95
|
 |
Description: This is the Xbee Explorer Dongle unit for the XBee line. With the Xbee Explorer dongle you can now plug the unit directly into your USB... |
$24.95
|
 |
Description: The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and... |
$9.95
|
 |
Description: This is the very popular 2.4GHz XBee XBP24-ACI-001 module from Digi (formally Maxstream). The Pro series have the same pinout and... |
$37.95
|
 |
This is the simple to use XBee module with chip antenna. Allows you to add either point to point or multi point communications to your Arduino or... |
$24.00
|
 |
This low cost XBee USB Adapter Board comes in partially assembled kit form and provides a cost-effective solution to interfacing a PC or... |
$20.00
|
 |
Description: This is a simple to use, USB to serial base unit for the XBee line. This unit works with all XBee modules including the Series 1 and... |
$24.95
|
 |
This adapter board is designed to make adding wireless point-to-point or mesh networking easy. Specifcations: Onboard 3.3V regulator to cleanly power... |
$10.00
|
 |
Description: This is a simple breakout board for the popular XBee product from Maxstream. This board breaks out all 20 pins of the XBee to a 0.1"... |
$2.95
|
 |
Description: This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Maxstream. Use this small part to avoid having to... |
$1.00
|
 |
Description: This is a simple DIP breakout for the Roving Networks Bluetooth® module. Two 0.1" headers allow easy and quick breadboarding. All... |
$59.95
|
 |
Description: The EM-406A GPS module from USGlobalSat based on the spectacular SiRF StarIII chipset. This complete module is built upon the same... |
$59.95
|
 |
Description: The EM-408 GPS module from USGlobalSat based on the spectacular SiRF StarIII chipset. This complete module is built upon the same... |
$59.95
|
 |
Description: Vertical surface mount connector for the EM406 and EM401 data cables. Part #: BM06B-SRSS-TB Documents: Connector Datasheet and Footprint |
$1.95
|
 |
Description: Magnet mount antenna for GPS modules operating at 3V. Designed for use with automobiles - the magnet will hold the antenna in place at... |
$12.95
|
 |
Description: PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These... |
$1.95
|
 |
Description: Got weather? This board can handle it. The USB Weather Board includes onboard sensors for barometric pressure, humidity, temperature,... |
$124.95
|
 |
Retired: This version has been updated to a newer version FTDI Basic Breakout - 3.3V kit. This page is for your reference only. Description: This is... |
$14.95
|
 |
Description: This is the newest revision of the SparkFun FTDI Basic. Now using a SMD 6-pin header on the bottom, which makes it smaller and more... |
$14.95
|
 |
Description: This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with... |
$13.95
|
 |
Description: This is the newest revision of our FTDI Basic . We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact.... |
$14.95
|
 |
Description: USB 2.0 type A to miniB 5-pin. This is the most common A to mini-B type connector commonly found with USB Hubs, Cameras, MP3 players,... |
$3.95
|
