| Product Image |
Item Name+ |
Price |
 |
A full-featured motor shield that will be able to power many simple to medium-complexity projects Specifcations: 2 connections for 5V 'hobby' servos... |
$19.50
|
 |
Overview The Arduino Motor Shield is based on the L298 (datasheet), which is a dual full-bridge driver designed to drive inductive loads such as... |
$29.95 $26.96
Save: 10% off
|
 |
Description: The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to 2A/phase. It is based... |
$22.95
|
 |
Description: Dual gearbox from Tamiya. This is an excellent way to get started quickly with robotics! You may have read many websites about servos,... |
$10.95
|
 |
Description: The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V... |
$14.95
|
 |
Description: Here is a basic hobby motor. It works well for basic things like making a fan or spinning something very fast without much resistance.... |
$0.95
|
 |
Description: This is one cool little car. This simple, two-wheel drive chassis has a rack-and-pinion style steering mechanism so it turns like a car,... |
$29.95
|
 |
Description: This motor has a 0.275" (7 mm) D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The face plate has two... |
$12.95
|
 |
Description: The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2)... |
$8.95
|
 |
Description: This is SparkFun's version of the OpenServo open-source servo controller board. It's meant to replace the existing controller board in... |
$14.95
|
 |
Description: This pan/tilt bracket consists of two brackets and all the hardware you need to attach them to make a pan/tilt mechanism using two servo... |
$5.95
|
 |
Description: This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light... |
$2.95
|
 |
Description: The RCDC board lets you control a small DC motor with either an RC receiver or an Arduino running the servo library. Features: Power LED... |
$18.95
|
 |
Description: This robotic claw is a step up from the classic. The MKII takes everything you loved about the standard robot claw from DAGU and makes... |
$11.95
|
 |
Description: This is a pan/tilt bracket designed specifically to work with the robotic claw that we sell. It comes with all of the hardware you need... |
$29.95
|
 |
Description: Here is a simple, low-cost, high quality servo for all your mechatronic needs. Large servo with a standard 3 pin power and control... |
$12.95
|
 |
Servo - Full Rotation Description: Here, for all your mechatronic needs, is a simple, high quality continuous full-rotation servo motor. A standard... |
$13.95
|
 |
Description: Here is a simple, low-cost, high quality servo for all your mechatronic needs. Small servo with a standard 3 pin power, control cable,... |
$10.95
|
 |
Description: Here, for all your mechatronic needs, is a simple, high quality continuous full-rotation servo motor. A standard 3-pin power and control... |
$11.95
|
 |
Description: Here is a simple, low-cost, high quality servo for all your mechatronic needs. Small servo with a standard 3 pin power, control cable,... |
$8.95
|
 |
Description: These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Features:... |
$6.95
|
 |
Description: Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers.This smaller solenoid is... |
$4.95
|
 |
Description: These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Note: This is a... |
$23.95
|
 |
Description: These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft... |
$29.95
|
 |
Description: These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Features: Step Angle... |
$16.95
|
 |
Description: This is a simple, but very powerful stepper motor with a 4-wire cable attached. Features: Step Angle (degrees) :1.8 2 Phase Rated... |
$14.95
|
 |
Description: Track set for tank treads. Use these treads to create your own tank setup. These work superbly with the Tamiya dual gear box. Comes... |
$7.95
|
 |
Description: These are different wheel combinations for the Tamiya twin gear box. All tire types press-fit directly onto the Tamiya axel without the... |
$6.95
|
 |
Description: These are different wheel combinations for the Tamiya twin gear box. All tire types press-fit directly onto the Tamiya axel without the... |
$6.95
|
 |
Description: The universal aluminum mounting hub allows you to mount custom wheels and mechanisms to 5 mm motor shafts. The hubs are sold in pairs.... |
$7.49
|
 |
Description: This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to make our... |
$14.95
|
 |
Description: This custom-designed plastic wheel from Pololu has a silicone tire measuring 1.26" (32 mm) in diameter and is designed to fit the output... |
$6.95
|
