| Product Image |
Item Name- |
Price |
 |
Description: This alcohol sensor is suitable for detecting alcohol concentration on your breath, just like your common breathalyzer. It has a high... |
$4.95
|
 |
Description: This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much... |
$7.95
|
 |
Description: This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much... |
$6.95
|
 |
Description: Simple breakout board for the MQ-3 Gas Sensor. All you need is VCC at 5V, GND, and a resistor to an ADC, that is it. Note: This is the... |
$0.95
|
 |
Description: The US1881 is an integrated Hall effect latched sensor. That's nice but what does it do? Holding a magnet near the sensor will cause the... |
$0.95
|
 |
Humidity and Temperature Sensor - SHT15 Breakout Description: This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The SHT15... |
$41.95
|
 |
Description: This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V.... |
$7.95
|
 |
Description: This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is... |
$2.95
|
 |
Description: This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is... |
$2.95
|
 |
Description: This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything... |
$9.95
|
 |
Description: This is a simple breakout board for our RFID readers. This board will bring the 2mm spaced pins out to two 0.1" spaced headers. You can... |
$0.95
|
 |
Description: This is a compact and easy to use RFID reader module. The ID-2 is a smaller module requiring an external antenna. Hook up an antenna,... |
$25.95
|
 |
Description: This is a basic RFID tag used for presence sensing, etc. Works in the 125kHz RF range. These tags come with a unique 32-bit ID and are... |
$1.95
|
 |
Description: Breakout board for the 3 axis MMA7260QT accelerometer from Freescale. Please view the datasheet for this impressive sensor! With a low... |
$19.95
|
 |
Description: Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output... |
$4.95
|
