| Product Image |
Item Name+ |
Price |
 |
Description: This alcohol sensor is suitable for detecting alcohol concentration on your breath, just like your common breathalyzer. It has a high... |
$4.95

|
 |
Description: This is a small voltage and current sense PCB. DC current is determined by measuring a voltage drop across a pair of parallel shunt... |
$19.95

|
 |
Description: This is a breakout board for the Bosch BMP085 high-precision, low-power barometric pressure sensor. The BMP085 offers a measuring range... |
$19.95

|
 |
Description: The ADJD-S311-CR999 is a great little color light sensor. In fact, it's so little that it can be pretty difficult to play with, so we... |
$14.95

|
 |
Description: The HMC6343 is a solid-state compass module with tilt compensation from Honeywell. The HMC6343 has three axis of magneto, three axis of... |
$149.95

|
 |
Description: Zilog's ePIR is a fully functional motion-detecting single-board computer (SBC). Combined on this board are a Z8 Encore! XP MCU, and a... |
$11.95

|
 |
Description: A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra... |
$7.95

|
 |
Description: A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra... |
$12.95

|
 |
Description: Do you ever wonder what your autonomous robots do all day? Or have you ever wanted to put yourself in the driver's seat of your favorite... |
$39.95

|
 |
Description: This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance... |
$5.95

|
 |
Description: This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much... |
$7.95

|
 |
Description: This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much... |
$6.95

|
 |
Description: Simple breakout board for the MQ-3 Gas Sensor. All you need is VCC at 5V, GND, and a resistor to an ADC, that is it. Note: This is the... |
$0.95

|
 |
Description: The US1881 is an integrated Hall effect latched sensor. That's nice but what does it do? Holding a magnet near the sensor will cause the... |
$0.95

|
 |
Description: It's not the heat but the humidity that gets you, at least that's what they say. Really, both are important, what you need is a sensor... |
$29.95

|
 |
Humidity and Temperature Sensor - SHT15 Breakout Description: This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The... |
$41.95

|
 |
Description This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy... |
$9.95

|
 |
Description: Infrared proximity sensor made by Sharp. Part # GP2Y0A02YK0F has an analog output that varies from 2.8V at 15cm to 0.4V at 150cm with a... |
$14.95

|
 |
Description: Infrared proximity sensor made by Sharp. Part # GP2D120XJ00F has an analog output that varies from 3.1V at 3cm to 0.3V at 40cm with a... |
$13.95

|
 |
Description: Use this simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it... |
$1.95

|
 |
Description: This is a three axis accelerometer for the LilyPad system. Based on the ADXL335 accelerometer from Analog Devices, the LilyPad... |
$24.95

|
 |
Description: This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V.... |
$7.95

|
 |
Description: Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output... |
$4.95

|
 |
Description: This is a linear analog centigrade temperature sensor. These can be easily connect to one of the Arduino's analog pins to read... |
$1.95

|
 |
Description: This load sensor is the same one found in digital bathroom scales (you know, the ones you use in January for your New Year's... |
$9.95

|
 |
Description: This is a simple three track magnetic card reader with serial output. This reader connects to your computer with a DB9 for serial and a... |
$59.95

|
 |
Description: The MagnetoPot is a contactless linear potentiometer used for liquid level and other harsh applications. This innovative sensor allows... |
$23.95

|
 |
Description: This is a very small light sensor. A photocell changes (also called a photodetector , CdS or photoconductive cell) resistance depending... |
$0.75

|
 |
Description: The BPW34 is a tiny, general purpose PiN photodiode. This photodiode has a ton of uses, one of which is to use it is a mini solar cell... |
$1.50

|
 |
Description: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm... |
$14.95

|
 |
Description: This is a breakout board for Freescale's MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The... |
$9.95

|
 |
Description: This non-invasive current sensor (also known as a "split core current transformer") can be clamped around the supply line of an... |
$9.95

|
 |
Description: This board allows you to interface with your car's OBD-II bus. It provides you a serial interface using the ELM327 command set and... |
$49.95

|
 |
Description: This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal... |
$1.13

|
 |
Description: Sharp's GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a... |
$11.95

|
 |
Description: This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is... |
$2.95

|
 |
Description: This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is... |
$2.95

|
 |
Description: The Minisense 100 is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful... |
$2.95

|
 |
Description: The Minisense 100 is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful... |
$2.95

|
 |
Description: This is a simple to use motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything... |
$9.95

|
 |
Description: Heart rate data can be really useful whether you're designing an exercise routine, studying your activity or anxiety levels or just want... |
$24.95

|
 |
Description: This is a small device called a reed switch. When the device is exposed to a magnetic field, the two ferrous materials inside the switch... |
$1.50

|
 |
Description: This is a simple breakout board for our RFID readers. This board will bring the 2mm spaced pins out to two 0.1" spaced headers. You can... |
$0.95

|
 |
Description: This is a very simple to use RFID reader module. With a built in antenna, the only holdup is the 2mm pin spacing (breakout board... |
$29.95

|
 |
Description: This is a compact and easy to use RFID reader module. The ID-2 is a smaller module requiring an external antenna. Hook up an antenna,... |
$25.95

|
 |
Description: This is a basic RFID tag used for presence sensing, etc. Works in the 125kHz RF range. These tags come with a unique 32-bit ID and are... |
$1.95

|
 |
Description: The RFID USB Reader is a simple to use, USB to serial base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader into the... |
$24.95

|
 |
Description: This 1024 pulse per rotation rotary encoder outputs gray code which you can interpret using a microcontroller and find out which... |
$39.95

|
 |
Description: 10K thermistor with a negative temperature coefficient. Good choice for temp-sensing aplications. Vishay part #: NTCLE100E3103JB0 ... |
$1.95

|
 |
Description: This basic tilt switch can easily be used to detect orientation. Inside the can are a pair of balls that make contact with the pins when... |
$1.99

|