| Product Image |
Item Name- |
Price |
 |
Description: This cable has 10 pins (2x5) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto either side,... |
$2.00
|
 |
Description: This cable has 10 pins (2x5) in 0.1"x0.1" spacing. This cable is used for chaining together 16x24 LED matrix panels. About 1.5" long... |
$1.50
|
 |
Description: This simple cable has so many uses! Plug the 9 volt battery clip onto a standard 9V battery and connect the other end to anything with a... |
$2.95
|
 |
Description: Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench... |
$2.95
|
 |
Description: These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Great, sturdy... |
$2.95
|
 |
Description: We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good... |
$2.50
|
 |
Description: We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections, protect devices, and electrically... |
$8.95
|
 |
Description: These are good quality IC test hooks with a male connection wire. Instead of a single hook, these have two hooks that are capable of... |
$4.95
|
 |
Description Add a power switch to any project simply by plugging this between the power supply. This is the most useful thing you never knew you... |
$2.95
|
 |
Description: This is a simple three wire cable. Great for jumping from board to board or just about anything else. These cables mate with the... |
$0.50
|
 |
Description: This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on... |
$0.95
|
 |
Description: This is a great cable if you need to work with the SMD JST connectors. Gives you four wires to work with. We use this cable for the USB... |
$1.50
|
 |
Description: This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. ... |
$0.95
|
 |
Description: This is a time saving kit of jumper wires - cut, stripped, and pre-bent for your prototyping pleasure. Included with this kit are 14... |
$6.95
|
 |
Description: These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers... |
$4.50
|
 |
Description: These are 155mm (6”) long jumpers with female connectors on both ends. Use these to jumper from any male header on any board, to any... |
$3.95
|
 |
Description: This is a SparkFun exclusive! (Ok, they like us so much that they let us sell them too!) These are 155mm long jumpers terminated as male... |
$3.95
|
 |
Description: These are 155mm (6”) long jumpers with male connectors on both ends. Use these to jumper from any female header on any board, to any... |
$3.95
|
 |
Description: Magnet wire is super useful stuff, and when you need it there's nothing else that will work. Whether you're winding a transformer or... |
$9.95
|
 |
Description: Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a... |
$4.95
|
 |
Description: Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a... |
$2.95
|
 |
Description: This 2x5 crimp connector snaps onto a 10-pin ribbon cable to form a dual-inline connection that can be pushed right into a breadboard.... |
$0.95
|
 |
Description: This is a 12" servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the... |
$2.95
|
 |
Description: You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What... |
$5.95
|
 |
Description: Behold, the Hydra! This USB power cable probably looks a lot like something you've hacked together before. We do it all the time,... |
$4.95
|
 |
Description: This is a USB 2.0 type A to Mini-B 5-pin cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players,... |
$3.95
|
 |
Description: Standard issue USB 2.0 cables. This is the most common A to B Male/Male type peripheral cable. Use this cable with most Arduino models.... |
$3.95
|
 |
Description: Standard A to micro-B USB cable. Use this cable with the new Arduino Leonardo models. Dimensions: Aprox. 3 Feet |
$3.95
|
 |
Description: These extension cables have a type A male connector on one end that plugs into any computer. The opposing end has a female type A... |
$3.95
|
 |
Description: USB 2.0 type A to micro USB 5-pin. This is a new, smaller connector for USB devices. Micro USB connectors are about half the height of... |
$4.95
|
 |
Description: High quality switching 'wall wart' AC to DC 9V 650mA wall power supply manufactured specifically for Spark Fun Electronics. These are... |
$5.95
|
 |
Description: This one is for all you audio geeks out there. If you are going to play with MIDI accessories you'll likely need a cable. We have a nice... |
$4.95
|
 |
Description: This is a simple, 6ft. 3.5mm audio cable. Commonly used with audio, this cable can also be used for really easy data transmission, as... |
$1.95
|
 |
Description: With this cable, you to can split one 3.5mm stereo jack into two stereo jacks. Very hand for use with the VoiceShield so that you can... |
$1.95
|
 |
This cable has been replaced by a better model. Used to connect the VoiceShield to your computer while loading the VoiceShield with audio. Any... |
$7.95
|
 |
Description: USB 2.0 type A to miniB 5-pin. This is the most common A to mini-B type connector commonly found with USB Hubs, Cameras, MP3 players,... |
$3.95
|
 |
This cable is ideal for connecting ShiftBrite RGB LED modules in series. The overall length is ~4.75 inches, enough to connect ShiftBrites that are... |
$1.59
|
 |
This cable is ideal for connecting ShiftBrite RGB LED modules in series. The overall length is ~8 inches, enough to connect ShiftBrites that are... |
$1.79
|
 |
This cable is ideal for connecting ShiftBrite RGB LED modules in series. The overall length is ~12.75 inches, enough to connect ShiftBrites that are... |
$1.99
|
 |
This cable is ideal for connecting ShiftBrite RGB LED modules in series. The overall length is ~19.75 inches, enough to connect ShiftBrites that are... |
$2.39
|
 |
This cable is ideal for connecting ShiftBrite RGB LED modules in series. The overall length is ~28.5 inches, enough to connect ShiftBrites that are... |
$2.79
|
 |
Description: This is an inexpensive HDMI cable that you can use to hook up your Raspberry Pi to a suitable monitor or TV. Heck, you can hook up... |
$4.95
|
 |
Description: RCA cables are super handy for moving analog signals around. This is a great way to connect a composite video capable device, like the... |
$2.95
|
