| Product Image |
Item Name- |
Price |
 |
Description: This is a simple breakout board for our ADH8066 miniature, quad-band GSM module. Standard 0.1" spaced headers allow easy access to a... |
$19.95
|
 |
Description: Ready to add audio to your next project? This small breakout board couples a small electret microphone with a 100x opamp to amplify the... |
$7.95
|
 |
Description: This is a breakout board for the L298N full-bridge dual motor driver; which comes in a staggered, Multiwatt package. All pins of the... |
$2.95
|
 |
Description: With SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to... |
$9.95
|
 |
Description: This is your basic 16 pin socket. Use it for projects where you don't want to solder your IC directly onto your project. |
$1.50
|
 |
Description: This is your basic 28 pin socket. Use it for projects where you don't want to solder your IC directly onto your project. |
$1.50
|
 |
Description: This is your basic 8 pin socket. Use it for projects where you don't want to solder your IC directly onto your project. |
$1.50
|
 |
Description: This is an 6 pin female header. It is exactly like the ones that are on the edges of a standard Arduino board. Please note: These are... |
$0.50
|
|
Description: This is an 8 pin female header. It is exactly like the ones that are on the edges of a standard Arduino board. Please note: These are... |
$0.50
|
 |
Description: This is a 4-pin connector commonly found on phone handsets. Great for simple TX/RX/PWR/GND connections. Sometime referred to as RJ9 or... |
$0.10
|
 |
Description This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy... |
$9.95
|
 |
Description: These are the same female pin headers that you find on stackable shields. This set includes two 6 pin and two 8 pin female headers. The... |
$1.50
|
 |
Description: This tiny audio amplifier is based on the Texas Instruments TPA2005D1. Its efficient class-D operation means low heat and long battery... |
$8.95
|
 |
Description: 6 Pin Polarized Header. Once the header is wired into a breadboard correctly, you simply plug any Olimex Programmer with ICSP onto the... |
$0.10
|
 |
Description: Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any... |
$1.25
|
 |
Description: The SPI Shortcut allows you to control SPI pins over USB, allowing for a virtual "SPI Terminal." Using basic serial commands you can... |
$24.95
|
 |
Description: These are small spring terminals. Open the aperature with the small arm, insert the wire, release the arm and the wire is held firmly in... |
$1.50
|
 |
Description: This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and... |
$11.95
|
 |
Description: This is a breakout board for Honeywell's HMC5883L, a 3-axis digital compass. Communication with the HMC5883L is simple and all done... |
$14.95
|
 |
Description: TRRS connectors are the audio-style connectors that you see on some phones, MP3 players and development boards. TRRS stands for "Tip,... |
$3.95
|
 |
Description: In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to know your... |
$9.95
|
 |
Description: This is a breakout board for the ISD1932, a multiple-message record/playback device. This single chip can record up to 64 seconds worth... |
$14.95
|
 |
Description: This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Maxstream. Use this small part to avoid having to... |
$1.00
|
