| Product Image |
Item Name |
Price+ |
 |
DESCRIPTION: If you have a project where you'd like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm 'free hanging'... |
$1.00
|
 |
This large (30mm diameter) piezo element is nicely enclosed with mounting holes so you can attach easily. Piezo elements convert vibration to voltage... |
$1.00
|
 |
Description: This cable has 10 pins (2x5) in 0.1"x0.1" spacing. This cable is used for chaining together 16x24 LED matrix panels. About 1.5" long... |
$1.50
|
 |
DESCRIPTION This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for... |
$1.95
|
 |
Description: The SparkFun Multiplexer Breakout provides access to all pins and features of the 74HC4051, an 8-channel analog... |
$1.99
|
 |
Description: This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and includes 4 mounting holes in the corners. ... |
$1.99
|
 |
Description: This cable has 10 pins (2x5) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto either side,... |
$2.00
|
 |
These pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white... |
$2.00
|
 |
DESCRIPTION Add a teeny analog light sensor, the ALS PT19 analog light sensor is a great way to upgrade a project that uses a photocell and needs... |
$2.50
|
 |
Description This is a great metal housing for your prototype. See below for dimensions. Mint tin dimensions: Top lid outer (not lip): 2.36" (59.9mm)... |
$2.50
|
 |
Description: The TRS (tip ring sleeve) jack breakout is a simple board that allows a ¼" stereo audio jack to be soldered on to gain easy access to... |
$2.50
|
 |
Description Add a power switch to any project simply by plugging this between the power supply. This is the most useful thing you never knew you... |
$2.95
|
 |
DESCRIPTION : If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male... |
$2.95
|
 |
Description: This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light... |
$2.95
|
 |
Description: The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor... |
$2.95
|
 |
Description: The SparkFun 8-Pin SOIC to DIP Adapter is a small PCB that lets you adapt SOIC packages into a DIP footprint. These tiny boards are... |
$2.95
|
 |
The Pogo Pin Probe Clip is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with a... |
$3.00
|
 |
These 28mm diameter (1-1/8") wheels are ideal for mini-sumo robotics. Newly re-designed and manufactured, these beautifully machined aluminum hubs... |
$3.95
|
 |
Description: Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many... |
$3.95
|
 |
Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for... |
$3.95
|
 |
If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a fine pitch (0.5mm) connector soldered onto it and... |
$4.00
|
 |
Remember the Panasonic BP2422 solar cell? It was small and tidy, generating a decent voltage suitable for driving low-voltage electronics in a small... |
$4.45
|
 |
This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's... |
$4.95
|
 |
Description: Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don’t. Sensor acts like a transistor - the... |
$4.95
|
 |
Description: The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level... |
$4.95
|
 |
Description: These simple switches are the Mechanical Bumper sensor for the SparkFun RedBot, giving you the ability to detect a collision before it... |
$4.95
|
 |
DESCRIPTION : This is an inverter for EL wire and tape, similar to the pocket inverters, except it is a brick that takes 12V input instead of 2 AA... |
$4.99
|
 |
A Bristlebot is a small robot made by combining a toothbrush head and a vibrating pager motor. The vibrations from the pager motor travel down the... |
$4.99
|
 |
This is the magic sauce in the Adafruit 7-segment and matrix backpacks, now available in breadboard-friendly breakout board format. The HT16K33 is a... |
$5.95
|
 |
Making a project that will fit into a "Altoids" Mint Tin? Put down that PCB shear and pick up a Perma-Proto in the new exciting minty shape!... |
$5.95
|
 |
DESCRIPTION Be the belle of the ball with the NeoPixel Jewel! We fit seven of our tiny 5050 (5mm x 5mm) smart RGB LEDs onto a beautiful,... |
$5.95
|
 |
Make your own little LED strip arrangement with this stick of NeoPixel LEDs. Adafruit crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a... |
$5.95
|
 |
This conductive material (also known as "Velostat" or "Linqstat") is a nice addition for your wearable/sensor hacking toolkit. It's... |
$5.95
|
 |
DESCRIPTION : A really tiny portable inverter for EL wire. Powers off of a single CR2032 coin battery (not included!), it can drive up to 50cm / 20... |
$5.99
|
 |
Our SCC2433-B solar cell is a monocrystalline cell offering 4.5V (open circuit) and 18mA (short circuit) in a 24x33mm package. What really makes this... |
$6.50
|
 |
Description Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a... |
$6.95
|
 |
Description: Introducing what is arguably the most important Arduino accessory ever created: The Googly Eye Shield for Arduino. Features: An... |
$6.95
|
 |
Description: These new hard plastic wheels are specially designed for our GM2, GM3, GM8, GM9 and GM17 gear motor output shafts. Although usable as... |
$7.00
|
 |
Description: This 224:1 gearmotor is very comparable to a hobby servo for power, at a fraction of the cost! This motor offers 48.6 in*oz of torque at... |
$7.00
|
 |
Description: These are impressive 224:1 gearmotors, which are very comparable to hobby servos for power, at a fraction of the cost! This model... |
$7.00
|
 |
The impressive GM6, which is a baby version of the popular GM2 gear motor. Designed by Mark Tilden, the GM6 has tighter tolerances and better... |
$7.00
|
 |
The impressive GM7, which is a baby version of the popular GM3 gear motor. Designed by Mark Tilden to have tighter tolerances and better performance... |
$7.00
|
 |
Description: This 143:1 gear motor is much like the GM2 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!... |
$7.00
|
 |
Description: This 143:1 gear motor is much like the GM3 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!... |
$7.00
|
 |
Make your next project super-flexy with a prototyping board that can twist and bend. Adafruit took their lovely classic perma-proto design and had it... |
$7.50
|
 |
DESCRIPTION: A small, portable inverter for EL wire. Powers off of 2 AA batteries (not included!), it can drive 1 to 8 feet (about 2.5m) of our... |
$7.50
|
 |
Round and round and round they go! 12 ultra bright smart LED NeoPixels are arranged in a circle with 1.5" (37mm) outer diameter. The rings are... |
$7.50
|
 |
Add lots of touch sensors to your next microcontroller project with this easy-to-use 12-channel capacitive touch sensor breakout board, starring the... |
$7.95
|
 |
Description Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip... |
$7.95
|
 |
Trinket may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot... |
$7.95
|
