Double checked all my soldering and it certainly looks OK. Any idea what might be up?
Cheers,
Mark
Time not advancing…
2 posts
• Page 1 of 1
Time not advancing…
by mch78 » Fri Dec 09, 2011 9:39 pm
Hi! Just finished my kit and while I can set the time—it's retained between button presses—it never advances
Double checked all my soldering and it certainly looks OK. Any idea what might be up?
Cheers,
Mark
Double checked all my soldering and it certainly looks OK. Any idea what might be up?
Cheers,
Mark
- mch78
- Posts: 2
- Joined: Fri Dec 09, 2011 9:33 pm
Re: Time not advancing…
by mch78 » Tue Dec 27, 2011 8:23 pm
I worked through all solder joints and eventually the time started to advance normally, so there must've been a dry joint 
- mch78
- Posts: 2
- Joined: Fri Dec 09, 2011 9:33 pm
2 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest