Adafruit
Product Image | Item Name+ | Price |
---|---|---|
Adafruit VL6180X Time of Flight Distance Ranging Sensor (VL6180)Description The VL6180X (sometimes called the VL6180) is a Time of Flight distance sensor like no other you've used! The sensor contains a very tiny... |
$13.95 |
|
Adafruit Wave Shield for Arduino Kit - v1.1Adding quality audio to an electronic project is surprisingly difficult. Here is a shield for Arduinos that solves this problem. It can play up to... |
$22.00 |
|
Adafruit WINC1500 WiFi Shield with PCB AntennaDescription Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. This... |
$24.95 |
|
Adjustable breadboard power supply - v1.2This project details the design of a very low dropout adjustable power supply. A good power supply is essential to electronic projects. While there... |
$15.00 |
|
ADS1015 12-Bit ADC - 4 Channel with Programmable Gain AmplifierDescription: For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit... |
$9.95 |
|
ADS1115 16-Bit ADC - 4 Ch Prog Gain QwiicDescription: For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit... |
$14.95 |
|
ADXL335 - 5V ready triple-axis accelerometer (+-3g analog out)Description: Adafruit updated their favorite triple-axis accelerometer to now have an on-board 3.3V regulator - making it a perfect choice for... |
$14.95 |
|
ADXL345 - Triple-Axis Accel (+-2g/4g/8g/16g) w/ I2C/SPI QwiicDescription: Here is a really lovely digital ADXL345 from Analog Devices, a triple-axis accelerometer with digital I2C and SPI interface breakout. We... |
$17.50 |
|
Altoids Gum sized tinDescription: Ever since Altoids discontinued the Gum version, its been hard to get tins. So Adafruit went and got a whole mess of them custom made!... |
$2.50 |
|
Analog UV Light Sensor Breakout - GUVA-S12SDDescription: Extend your light-sensing spectrum with this analog UV sensor module. It uses a UV photodiode, which can detect the 240-370nm range of... |
$6.50 |
|
Assembled Drawdio fun pack - v1.1Description: Drawdio is an electronic pencil that lets you make music while you draw! This fun pack has all the fun without the soldering.... |
$25.00 |
|
Breadboard-Friendly PCB Mount Mini Speaker - 8 Ohm 0.2WDescription: Listen up! This 1.1" (~30mm) diameter speaker is the perfect addition to any breadboard-based audio project where you need 8 Ohm... |
$2.95 |
|
CAP1188 - 8-Key Capacitive Touch Sensor Breakout - I2C or SPIAdd lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the... |
$7.95 |
|
Circuit Playground ClassicDescription: Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and... |
$19.95 |
|
Circuit Playground ExpressDescription: Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. Adafruit has taken the... |
$24.95 |
|
Circuit Playground Express - Base KitDescription: It's the Circuit Playground Express Base Kit! It provides the few things you'll need to get started with the new Circuit Playground... |
$29.95 |
|
Circuit Playground Express Advanced PackDescription: Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original... |
$99.95 |
|
CNC Rotary Encoder - 100 Pulses per Rotation - 60mm BlackDescription: We have various PCB-mount rotary encoders in the shop, great for making interfaces where you may want to spin a knob around to select a... |
$18.25 |
|
Colorful Round Tactile Button Switch Assortment - 15 packDescription: Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless... |
$6.95 |
|
Conductive Rubber Cord Stretch Sensor + extras!Description: Measuring stretch forces isn't easy - unless you have some conductive rubber cord! This cord is 2mm diameter, and 1 meter long, made of... |
$9.95 |
|
Conductive Rubber Sheet / Stretch Sensor- 200mm x 200mm x 0.5mmDescription: This rubber sheet is made of the same carbon-black impregnated rubber material that the conductive rubber cord uses. Traditionally it... |
$6.45 |
|
Conway's Game of Life Kit v1.3In 1970, John Conway came up with a 1-player game called Game of Life. The Game of Life is a mathematical game that simulates 'colonies' that grow or... |
$12.50 |
|
DIY Snow Globe Kit - 108mm DiameterDescription: Not merely a snow globe, but a show globe! This custom container is durable, clear and round, with a large flat screw-on top and a... |
$5.95 |
|
Drawdio kit - v1.1Drawdio is an electronic pencil that lets you make music while you draw! It's great project for beginners: An easy soldering kit with instant... |
$17.50 |
|
Electret Microphone Amplifier - MAX4466 with Adjustable GainDescription Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a... |
$6.95 |
|
Electret Microphone Amplifier - MAX9814 with Auto Gain ControlDESCRIPTION : Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes... |
$7.95 |
|
Electric Heating Pad - 14cm x 5cmDescription: This is hot! Literally! Apply 5-12VDC and the stainless steel fibers in this heating fabric will warm up, creating a little heating pad.... |
$6.25 |
|
FLORA - Wearable electronic platform: Arduino-compatible - v3Description: FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to... |
$14.95 |
|
Flora RGB Smart NeoPixel version 2 - Pack of 4Description: What's a wearable project without LEDs? Our favorite part of the Flora platform is these tiny smart pixels. Designed specifically for... |
$8.95 |
|
Flora RGB Smart NeoPixel version 2 - Sheet of 20Description: So, you want lots and lots of NeoPixels? And you want them for less? Not a problem! Here's a sheet of Flora NeoPixels fresh from the... |
$25.95 |
|
Flora Sewable 3-Pin JST Wiring AdapterDescription: This board is a sewable adapter with a 3-pin JST wiring adapter. It's a perfect way to add a simple link between things like the Flora... |
$2.25 |
|
Flora Wearable Ultimate GPS ModuleDescription: This module is the best way to add a GPS to your wearable project. It's part of the Adafruit Flora series of wearable electronics,... |
$24.95 |
|
FTDI Friend + extras - v1.0Note: These use genuine FTDI chips, Adafruit either purchase them or they are manufactured to our specifications with the requirement of genuine FTDI... |
$14.75 |
|
HC-SR04 Ultrasonic Sonar Distance Sensor + 2 x 10K resistorsDescription: Imagine being a dolphin - smoothly gliding through the water. Using your echo-location abilities to detect tasty fish treats. Until... |
$5.95 |
|
Hook-up Wire Spool Set - 22AWG Solid Core - 10 x 25ftDescription: This is a box of ten 25ft spools of solid-core wire. The wire is easy to solder to, and when bent it keeps its shape pretty well.... |
$29.95 |
|
Hook-up Wire Spool Set - 22AWG Stranded-Core - 6 x 25ftDescription: This is a box of six 25ft spools of stranded-core wire. Stranded-core wire is best used for wiring jigs where there's bending or... |
$19.95 |
|
i2c / SPI character LCD backpackDescription: LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project... |
$9.95 |
|
INA169 Analog DC Current Sensor Breakout - 60V 5A MaxDescription This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy... |
$9.95 |
|
IR Break Beam Sensors with Premium Wire Header Ends - 3mm LEDsDescription: Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of... |
$4.95 |
|
Light and temperature data-logger packDescription: Adafruit worked hard to make a well-designed data logger shield for Arduino that is inexpensive but a well-rounded design. Not only is... |
$23.95 $21.95 Save: 8% off |
|
Lithium Ion Polymer Battery - 3.7v 150mAhDescription: Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when... |
$6.59 |
|
Low-Profile microSD card adapter for Raspberry PiDescription: Make your Pi a little slimmer with this microSD card adapter board. It slides in where the SD card goes but is half the length. Pop in a... |
$5.95 |
|
MCP23008 - i2c 8 input/output port expanderDescription: Add another 8 pins to your microcontroller using an MCP23008 port expander. The MCP23008 uses two i2c pins (these can be shared with... |
$2.25 |
|
MCP4725 Breakout Board - 12-Bit DAC w/I2C InterfaceDescription: Your microcontroller probably has an ADC (analog -> digital converter) but does it have a DAC (digital -> analog converter)??? Now it... |
$5.95 |
|
MCP9808 High Accuracy I2C Temperature Sensor Breakout BoardThis I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's... |
$4.95 |
|
MicroSD card breakout board+Description: Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides... |
$7.99 |
|
Mini Metal Speaker w/ Wires - 8 ohm 0.5WDescription: Listen up! This tiny 1" diameter speaker cone is the perfect addition to any small audio project where you need an 8 ? impedance and... |
$2.95 |
|
Mini Oval Speaker with Short Wires - 8 Ohm 1 WattDescription: This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. Adafruit... |
$2.95 |
|
Mini Pan-Tilt Kit - Assembled with Micro ServosDescription: This fully-assembled pan-tilt kit is the perfect way to give your project full range motion with two micro servos. The pan-tilt can... |
$18.95 |
|
MiniPOV 4 Kit - DIY Full-Color POV and Light Painting Kit - v4.0The latest and greatest MiniPOV kit to hit the streets - MiniPOV4! Adafruit has added full color RGB LEDs to the kit as well USB programmability to... |
$24.95 |