Adafruit VL53L0X Time of Flight Distance Sensor - ~30 to 1000mm

$15.95

  • Model: 3317
  • Shipping Weight: 0.05Kg
  • 1 Units in Stock
  • Manufactured by: Adafruit

Additional Images




DESCRIPTION: The VL53L0X is a Time of Flight distance sensor like no other you've used! The sensor contains a very tiny invisible laser source, and a matching sensor. The VL53L0X can detect the "time of flight", or how long the light has taken to bounce back to the sensor. Since it uses a very narrow light source, it is good for determining distance of only the surface directly in front of it. Unlike sonars that bounce ultrasonic waves, the 'cone' of sensing is very narrow. Unlike IR distance sensors that try to measure the amount of light bounced, the VL53L0x is much more precise and doesn't have linearity problems or 'double imaging' where you can't tell if an object is very far or very close.

The sensor is small and easy to use in any robotics or interactive project. Since it needs 2.8V power and logic Adafruit put the little fellow on a breakout board with a regulator and level shifting. You can use it with any 3-5V power or logic microcontroller with no worries. Each order comes with a small piece of header. Solder the header onto your breakout board with your iron and some solder and wire it up for instant distance-sensing-success!

Communicating to the sensor is done over I2C with an API written by ST, so its not too hard to port it to your favorite microcontroller. Here is a link to a wrapper library for Arduino so you can use it with any of your Arduino-compatible boards.

Check out Adafruit's tutorial for code, schematics, diagrams and more!

In 'long range' mode you can detect as far as 1.5 to 2 meters on a nice white reflective surface.

Product Dimensions: 21.0mm x 18.0mm x 2.8mm / 0.8" x 0.7" x 0.1"

Product Weight: 1.3g / 0.0oz


Add to Cart:


wabusiness template