Ultrasonic Range Finder - XL-Maxsonar WR1

$104.95

  • Model: SEN-09496
  • Shipping Weight: 0.22Kg
  • 1 Units in Stock

Additional Images



Description: This is the new, weather resistant, field-hardened WR1 from Maxbotix. The XL series of this sensor features higher resolution, longer range, higher power output and better calibration when compared to the LV version.

The WR1 uses a robust PVC housing, is designed to meet IP67 water intrusion, and matches standard electrical 3/4" PVC pipe fittings. The sensor provides very accurate readings from 0 to 765cm (0 to 25.1ft) with 1cm resolution. This sensor can be powered with anywhere between 3.3 and 5VDC.

Range information can be gathered through one of three methods - analog, serial, or PWM - all of which are active at the same time. The analog output will produce a voltage proportional to the measured distance, with a sensitivity of (Vcc/1024)V/cm. The serial interface is simple and formatted to RS-232, with voltages ranging from 0 to Vcc and terminal settings of 9600-8-N-1. Finally, the PWM pin outputs a pulse-width representation of the range with a scale factor of 58us/cm.

Mounting hardware
is also available, designed specifically for this device.

Features:

  • 3.3V to 5V supply with very low average current draw
  • All interfaces are active simultaneously
  • Serial, 0 to Vcc
  • 9600 baud, 8-N-1
  • Analog, (Vcc/1024) / cm resolution
  • Pulse Width
  • High acoustic power output
  • Real-time auto calibration and noise rejection for every ranging cycle
  • Precise narrow beam
  • Continuously variable gain
  • Object detection includes zero range objects
  • Readings can occur up to every 100mS, (10-Hz rate)
  • Free run operation can continually measure and output range information
  • Triggered operation provides the range reading as desired
  • Sensor operates at 42KHz
  • Documents:


    Add to Cart:


    wabusiness template