I2C LCD Interface v3 - Kit

$9.75

  • Model: SPL-002100
  • Shipping Weight: 0.015Kg
  • 32 Units in Stock
  • Manufactured by: SpikenzieLabs

Additional Images



Description: This is the newest kit version of our basic I2C LCD interfaces. This version is smaller than ever and includes software controllable LCD back-lighting. It also includes a high quality contrast trimmer pot, no fussing with microscopic screw drivers and trimmer pots that turn 360° even when they aren't designed to. Similar to our older I2C LCD interfaces there are pin outs for up to five push buttons. Note: on the standard configuration only four buttons are available since the circuitry of button 5 is used to control the back-lighting. See the instructions page for how to use button number "5" or back-light control. Version 3 also includes the on board required pull-up resistors for I2C. Now the I2C LCD back-pack is even easier to use, you can connect the back-pack with just two wires directly to your Arduino without the need for a breadboard with pull-up resistors.

Features:

  • 5V DC
  • LCD Back-light control
  • Up to five button inputs
  • Very small size
  • Works with any character LCD
  • High quality contrast pot
  • On board I2C pull up resistors

Dimensions:

  • 1 5/8" x 1" (41mm x 25mm)
  • ~ 3/8" (9mm) thick

Kit Includes:

  • 1x I2C LCD v3 PCB
  • 1x MCP23017 Port Expander
  • 1x 1/4" 10k Ohm Trimmer Pot
  • 5x 10k ohm resistors
  • 2x 4.7k ohm resistors
  • 1x PN2222 NPN Transistor 1A

This I2C LCD Interface will work with our older I2C LCD Demo Arduino Sketch but to use the back-light control you will need the updated the newer sketch I2C LCD Board v3 Sketch Demo

Click here for more I2C Interface info.

Click here for more general LCD basic usage info.

Documentation: I2C LCD Interface v3 Schematic

Since this is a kit, assembly is required. The kit contains all of the main parts to build your I2C LCD interface. You supply the simple tools and supplies listed below.

Tools & Supplies required:

  • Soldering iron
  • Solder
  • Wire snips
  • Male or Female Pin headers as needed.


Add to Cart:


wabusiness template