U.S. - English + Int.
SpikenzieLabs (69)
Arduino-> (128)
SparkFun-> (173)
Adafruit-> (325)
More brands-> (106)
Useless Machine (6)
Drum Kits (13)
Toys & Game Kits (12)
Blinkies (21)
LED & Light kits (17)
Watches & Clocks (11)
Starter Stuff-> (26)
Components-> (336)
Prototyping-> (192)
Development-> (42)
Mechatronics-> (182)
Sensors-> (195)
Wireless-> (90)
Audio-> (68)
Wearables-> (106)
Wire and Cables-> (187)
Power & Batteries-> (103)
Tools-> (92)
Supplies (14)
Educators-> (33)
Retired (292)
Clearance (21)
Replacement Part (2)
Categories
Spotlight - [more]
Sparkfun
| Product Image | Item Name | Price+ |
|---|---|---|
 |
Jumper Wires Premium 12" M/M Pack of 10Description: These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers... |
$4.50 |
 |
LilyPad Reed SwitchDescription: The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactly the same... |
$4.50 |
 |
Button Pad 2x2 - Breakout PCBDescription: This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered... |
$4.95 |
 |
High Temperature Adhesive Tape - (1cm, 33m)Description: This is a 33 meter roll of polyimide tape. This tape is a fantastic insulator, like electrical tape, but it can withstand temperatures... |
$4.95 |
 |
LilyPad LED Green (5 pieces)Description: Here is a simple 5 pack of green LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable... |
$4.95 |
|
LilyPad LED Yellow (5 pieces)Description: Here is a simple 5 pack of yellow LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable... |
$4.95 |
 |
Piezo Vibration Sensor - LargeDescription: This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is... |
$4.95 |
 |
Retired - LilyPad BobbinDescription: This is dual-purpose bobbin with 30ft of high quality 4-ply conductive thread. Once the thread is gone, the bobbin doubles as a small... |
$4.95 |
|
Retired - LilyPad LED Blue (5 pieces)Retired: This product has been replaced by a new version. This page is for your reference only. Description: Here is a simple 5 pack of blue LEDs for... |
$4.95 |
|
Retired - LilyPad LED Red (5 pieces)Retired: This product has been replaced by a newer version.. This page is for your reference only. Description: Here is a simple 5 pack of red LEDs... |
$4.95 |
 |
Retired - LilyPad Simple PowerRetired: This product has been replaced by a newer version. This page is for your reference only. Description: The LilyPad Simple Power is a board... |
$4.95 |
 |
Retired - Liquid Flux Pen - Water SolubleDescription: This is a water soluble liquid flux pen. A flux pen is a must have when performing any kind of solder rework. The flux is the substance... |
$4.95 |
 |
RF Link Transmitter - 315MHzDescription: These wireless transmitters work with our 315MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to... |
$4.95 |
 |
RF Link Transmitter - 434MHzDescription: These wireless transmitters work with our 434MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to... |
$4.95 |
 |
SparkFun Hydra Power Cable - 6ftDescription: Behold, the Hydra! This USB power cable probably looks a lot like something you've hacked together before. We do it all the time,... |
$4.95 |
 |
SparkFun Qwiic Button - Red LEDDescription: Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring... |
$4.95 |
 |
LilyPad BuzzerDescription: This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the... |
$5.25 |
 |
SparkFun Ambient Light Sensor Breakout - TEMT6000Description: Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don’t. Sensor acts like a transistor - the... |
$5.25 |
 |
LilyPad Temperature SensorDescription: Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output... |
$5.50 |
 |
Opto-isolator BreakoutDescription: This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a... |
$5.50 |
 |
SparkFun Basic Flashlight Soldering KitDescription: Are you new to soldering and want to learn the basics with one easy kit? This Flashlight Soldering Kit is an easy to assemble soldering... |
$5.50 |
 |
SparkFun micro:bit BreakoutDescription: The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform... |
$5.50 |
 |
SparkFun Qwiic EEPROM Breakout - 512KbitDescription: The SparkFun Qwiic EEPROM Breakout is a simple and cost effective option to add some extra storage space to any project. With 512... |
$5.50 |
 |
SparkFun Solder-able BreadboardDescription: This is the SparkFun Solderable Breadboard. A bare PCB that is the exact size as our regular breadboard with the same connections to... |
$5.50 |
 |
LilyPad Protoboard LargeDescription: This is a large board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together... |
$6.95 $5.91 Save: 15% off |
 |
Analog/Digital MUX BreakoutDescription: This is a breakout board for the very handy 16-Channel Analog/Digital Mulitplexer/Demultiplexer CD74HC4067. This chip can be used to... |
$5.95 |
 |
Keypad - 12 ButtonDescription: A basic 12 button keypad for user input. The buttons are setup in a matrix format. This allows a microcontroller to 'scan' the 7 output... |
$5.95 |
 |
LilyPad Pixel BoardDescription: We know you love adding color to your e-textiles, adding the LilyPad Pixel Board to your project will only make it better. The pixel... |
$5.95 |
 |
Piezo Vibration Sensor - Large with MassDescription: This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is... |
$5.95 |
 |
Retired - "Uh-oh" Battery Level Indicator KitDescription: Under-powering a digital device can sometimes have pretty nasty consequences. Brown-out conditions can cause memory to get written or... |
$5.95 |
 |
Retired - NCP1402-5V Step-Up BreakoutDescription: The NCP1402 is a 5V DC-DC converter. This breakout board will accept voltage inputs between 1 and 4 Volts and output a constant, low... |
$5.95 |
 |
Retired - Polymer Lithium Ion Batteries - 20mAhRetired: This product is no longer available. This page is for your reference only. Description: This is an extremely tiny and light weight battery... |
$5.95 |
 |
Retired - Tilt-a-Whirl Breakout - RPI-1031Description: The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This... |
$5.95 |
 |
RF Link Receiver - 4800bps (315MHz)Description: These wireless receivers work with our 315MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to... |
$5.95 |
 |
RF Link Receiver - 4800bps (434MHz)Description: These wireless receivers work with our 434MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to... |
$5.95 |
 |
SparkFun Cerberus USB Cable - 6ftDescription: You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What... |
$5.95 |
 |
SparkFun Level Shifting microSD BreakoutDescription: The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level... |
$5.95 |
 |
SparkFun MOSFET Power Control KitDescription: This is the SparkFun MOSFET Power Control Kit, a breakout PTH soldering kit for for the RFP30N06LE N-Channel MOSFET. This kit is... |
$5.95 |
 |
Wall Adapter Power Supply - 12VDC 600mADescription: This is a high quality AC to DC 'wall wart' which produces a regulated output of 12VDC at up to 600mA. These are switch mode power... |
$5.95 |
 |
Wall Adapter Power Supply - 5V DC 2A (USB Micro-B)Description This is a high quality switching ‘wall wart’ AC to DC 5V 2000mA USB Micro-B wall power supply manufactured specifically for SparkFun... |
$5.95 |
 |
SparkFun Ambient Light Sensor - VEML6030 (Qwiic)Description: Looking for an option to sense ambient light? The VEML6030 Qwiic board is a great starter option. The VEML6030 is a high accuracy... |
$6.25 |
 |
LilyPad SimpleSnap ProtoboardDescription: The LilyPad SimpleSnap Protoboard is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled... |
$6.50 |
 |
SparkFun RedBot Sensor - Mechanical BumperDescription: These simple switches are the Mechanical Bumper sensor for the SparkFun RedBot, giving you the ability to detect a collision before it... |
$6.50 |
 |
Alligator Clip with Pigtail (10 Pack)Description This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips... |
$6.95 |
 |
Force Sensitive Resistor - SmallDescription: This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance... |
$6.95 |
 |
Force Sensitive Resistor 0.5"Description: This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much... |
$6.95 |
 |
LilyPad E-Sewing ProtoSnapDescription The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e-sewing circuits before crafting your... |
$6.95 |
 |
MOSFET Power ControllerDescription: MOSFETs are awesome. They're like a switch that you flip electronically! This MOSFET Power Controller makes it easy to switch a battery... |
$6.95 |
 |
Pi WedgeDescription: This is the Pi Wedge, a small board that connects to the Raspberry Pi’s 26-pin GPIO connector, and breaks the pins out to... |
$6.95 |
 |
Polymer Lithium Ion Batteries - 110mAhDescription: This is a very small, extremely light weight batty based on the new Polymer Lithium Ion chemistry. This is the highest energy density... |
$6.95 |
Specials
SparkFun LiPower Shiel...$29.95 $20.97
Save: 30% off
SparkFun Triple-Axis D...$24.95 $17.47
Save: 30% off
RS232 Shield V2$11.95 $9.56
Save: 20% off
Solid State Relay Kit$19.95 $13.97
Save: 30% off
Touch Shield$14.95 $8.97
Save: 40% off- LilyPad Protoboard Lar...$6.95 $5.91
Save: 15% off
