Matériel



Image Produit Nom Article- Prix
Cable Carrier - 10x15mm (0.5m Length)

Cable Carrier - 10x15mm (0.5m Length)

Description: No, this isn’t a tank tread, this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at...
C$14.23

Acheter maintenant

Fixture Clip - Short

Fixture Clip - Short

Description Doesn't this fixture clamp look like a character in a Pixar movie? If you just drew two little eyes on it then you could just imagine it...
C$1.23

Acheter maintenant

Mini Illuminated Momentary Pushbutton - Red Power Symbol

Mini Illuminated Momentary Pushbutton - Red Power Symbol

Description This Mini Illuminated Momentary Power Button it an adorable breadboard-friendly tactile switch that has a built-in LED. It provides a...
C$2.53

Acheter maintenant

Silicone Bumpers - Large (10x16.5mm, 4 pack)

Silicone Bumpers - Large (10x16.5mm, 4 pack)

Description: Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or...
C$1.23

Acheter maintenant

Small Heatsink

Small Heatsink

Description: These tiny little black anodized heatsinks are perfect for cooling off small surface-mount components such as the Allegro A4983 stepper...
C$2.53

Acheter maintenant

Standoff - Metal (3/8", 4-40, 10 pack)

Standoff - Metal (3/8", 4-40, 10 pack)

Description: Metal short standoffs: 3/8" long x 1/4"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with...
C$3.83

Acheter maintenant

Standoff - Metal Hex (3/8", 4-40, 10 pack)

Standoff - Metal Hex (3/8", 4-40, 10 pack)

Description: Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10
C$5.13

Acheter maintenant

Standoff - Swage - (0.218")

Standoff - Swage - (0.218")

Description: 0.218" tall, brass swage attachable stand off. Non-threaded.
C$0.65

Acheter maintenant

Standoff - Swage - (0.3125")

Standoff - Swage - (0.3125")

Description: 0.3125" tall, brass swage attachable stand off. Non-threaded.
C$1.23

Acheter maintenant

Télécommande IR

Télécommande IR

Description: Télécommande IR Spécifications: Vous souhaitez contrôler votre projet ou votre prototype à l'aide de l'infrarouge? Eh bien, vous...
C$5.13

Acheter maintenant

Uno R3 Screw Shield For Arduino

Uno R3 Screw Shield For Arduino

Description: Screw terminal strip shield for Arduino r3 Specifications: Sometimes you have some stranded wire, or want to interface an Arduino with...
C$11.63

Acheter maintenant

Silicone Clips and Screws for WS2812 LED Strips - set of 5

Silicone Clips and Screws for WS2812 LED Strips - set of 5

Description These nylon clips will let you attach flexible WS2812B strips to a wall, moulding, or project. Just side the rubber tubing thru so that...
C$2.53

Acheter maintenant

Altoids mints sized tin

Altoids mints sized tin

Description This is a great metal housing for your prototype. See below for dimensions. Mint tin dimensions: Top lid outer (not lip): 2.36" (59.9mm)...
C$3.25

Acheter maintenant


wabusiness template