Sparkfun
Product Image | Item Name- | Price |
---|---|---|
Retired - Long Nosed PliersDescription: These pliers are perfect in situations where your standard needle nose pliers are a bit too wide and a pair of tweezers just isn't... |
C$5.45 |
|
Retired - Liquid Flux Pen - Water SolubleDescription: This is a water soluble liquid flux pen. A flux pen is a must have when performing any kind of solder rework. The flux is the substance... |
C$6.83 |
|
Retired - LiPoly Charger - Single Cell 3.7-7V InputDescription: This is a Polymer Lithium Ion battery charger based on the MAX1555 IC. This charger uses either USB bus power (MAX1555 internally limits... |
C$23.39 |
|
Retired - LilyPad XBeeRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: The is a breakout board for... |
C$20.63 |
|
Retired - LilyPad Vibe BoardRetired: This version has been replaced by a newer version of the Vibe Board. This page is for your reference only. Description: Apply 5V and be... |
C$20.63 |
|
Retired - LilyPad Power SupplyRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: A small, but mighty power... |
C$20.63 |
|
Retired - LilyPad Power SupplyDescription: A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the... |
C$20.63 |
|
Retired - LilyPad LiPowerDescription: A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about... |
C$20.63 |
|
Retired - LilyPad LED White (5pcs)Retired: This product has been replaced by a new version. This page is for your reference only. Description: A simple, very bright, 250mcd, white... |
C$5.45 |
|
Retired - LilyPad LED Red (5 pieces)Retired: This product has been replaced by a newer version.. This page is for your reference only. Description: Here is a simple 5 pack of red... |
C$6.83 |
|
Retired - LilyPad LED Blue (5 pieces)Retired: This product has been replaced by a new version. This page is for your reference only. Description: Here is a simple 5 pack of blue LEDs... |
C$6.83 |
|
Retired - Lilypad Coin Cell Battery HolderDescription: If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick.... |
C$5.45 |
|
Retired - LilyPad Bright White LEDDescription: A simple, very bright, 250mcd, white LED LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah... |
C$2.69 |
|
Retired - LilyPad BobbinDescription: This is dual-purpose bobbin with 30ft of high quality 4-ply conductive thread. Once the thread is gone, the bobbin doubles as a small... |
C$6.83 |
|
Retired - Lilypad Battery ConnectDescription: The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your LilyPad... |
C$4.07 |
|
Retired - LilyPad Arduino Simple BoardDescription: This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the... |
C$27.53 |
|
Retired - LilyPad AccelerometerDescription: This is a three axis accelerometer for the LilyPad system. Based on the ADXL330 accelerometer from Analog Devices, the LilyPad... |
C$34.43 |
|
Retired - LED RingCoder Breakout - RGBDescription: This breakout board gives you a pretty slick interface for rotary input. Since rotary encoders turn continuously it can be difficult to... |
C$9.59 |
|
Retired - i-RacerDescription: This is one cool little car. This simple, two-wheel drive chassis has a rack-and-pinion style steering mechanism so it turns like a car,... |
C$41.33 |
|
Retired - Humidity and Temperature Sensor - SHT15 BreakoutHumidity and Temperature Sensor - SHT15 Breakout Description: This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The... |
C$57.89 |
|
Retired - FTDI Basic Breakout - 3.3VRetired: This version has been updated to a newer version FTDI Basic Breakout - 3.3V kit. This page is for your reference only. Description: This... |
C$20.63 |
|
Retired - Evaluation Board for Si4703 FM TunerDescription: This is an evaluation board for the Silicon Laboratories Si4703 FM tuner chip. Beyond being a simple FM radio, the Si4703 is also... |
C$27.53 |
|
Retired - EasyDriver v3 Stepper Motor DriverRetired: This product has been replaced by the EasyDriver Stepper Motor Driver. This page is for your reference only. Description: EasyDriver v3... |
C$20.63 |
|
Retired - EasyDriver Stepper Motor Driver v4Retired: This product has been replaced by the EasyDriver Stepper Motor Driver. This page is for your reference only. Description: The EasyDriver... |
C$20.63 |
|
Retired - EasyDriver Stepper Motor DriverRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: The EasyDriver is a simple... |
C$20.63 |
|
Retired - Disco - Digital MultimeterDescription: This is for all those starving students that need to buy their first good, low-cost multimeter. This meter has really impressive overall... |
C$20.63 Max: 1 |
|
Retired - Danger ShieldDescription: The Danger Shield mounts on top of your Arduino and equips it with a variety of fun and useful inputs and outputs. The Danger Shield has... |
C$41.33 |
|
Retired - Conductive Thread - 234/34 4plyRetired: This product is no longer available. We now have a better version made of stainless steel. Conductive Thread - 60g (Stainless Steel) ... |
C$48.23 |
|
Retired - Conductive Thread - 117/17 2plyRetired: This product is no longer available. We now have a better version made of stainless steel. Conductive Thread - 60g (Stainless Steel) ... |
C$45.47 |
|
Retired - Color Light Sensor Evaluation BoardDescription: The ADJD-S311-CR999 is a great little color light sensor. In fact, it's so little that it can be pretty difficult to play with, so we... |
C$20.63 |
|
Retired - CC3000 WiFi ShieldDescription: This is a shield for the CC3000 WiFi Module. The CC3000 from TI (Texas Instruments) is a self-contained wireless network processor that... |
C$55.13 |
|
Retired - Breakout Board for VS1103 MIDI DecoderDescription: The VS1103b is a single-chip MIDI/ADPCM/WAV audio decoder and ADPCM encoder that can handle up to three simultaneous audio streams. It... |
C$27.53 |
|
Retired - Breakout Board for USB microBDescription: This simple board breaks out a micro-B USB connector's VCC, GND, D- and D+ pins to a 0.1" pitch header. If you want to add the... |
C$2.76 |
|
Retired - Breadboard Power Supply Stick 5V/3.3VRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: This is a very simple board... |
C$20.63 |
|
Retired - Bluetooth DIP Module - Roving NetworksDescription: This is a simple DIP breakout for the Roving Networks Bluetooth® module. Two 0.1" headers allow easy and quick breadboarding. All... |
C$82.73 |
|
Retired - Beginner Parts KitRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: This is the new revision of... |
C$34.43 |
|
Retired - Arduino MegaShield KitDescription: The Arduino Mega now has its very own prototyping shield! The MegaShield mates with the Arduino Mega board and gives the user a... |
C$24.77 C$14.86 Save: 40% off |
|
Retired - ADH8066 BreakoutDescription: This is a simple breakout board for our ADH8066 miniature, quad-band GSM module. Standard 0.1" spaced headers allow easy access to a... |
C$27.53 |
|
Retired - "Uh-oh" Battery Level Indicator KitDescription: Under-powering a digital device can sometimes have pretty nasty consequences. Brown-out conditions can cause memory to get written or... |
C$8.21 |
|
Retiired - MonoAmp - Sound Amplifier RetailDescription: This tiny audio amplifier is based on the Texas Instruments TPA2005D1. Its efficient class-D operation means low heat and long battery... |
C$12.35 |
|
Resistor Kit - 1/4W (500 total)Description: Resistors are a good thing, in fact, they're actually crucial in a lot of circuit designs. The only problem seems to be that resistors... |
C$12.35 |
|
Replaced - USB Weather BoardDescription: Got weather? This board can handle it. The USB Weather Board includes onboard sensors for barometric pressure, humidity, temperature,... |
C$172.43 |
|
Replaced - Tool Kit - BeginnerRetired: This product has been replaced by a newer version. This page is for your reference only. Description: This assortment of tools is great... |
C$30.29 |
|
Replaced - Sunny Buddy - MPPT Solar ChargerDescription: This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger... |
C$34.43 |
|
Replaced - SparkFun Weather ShieldDescription: The Weather Shield is an easy to use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and... |
C$55.13 |
|
Replaced - SparkFun VR IMU Breakout - BNO080 (Qwiic)Description: Virtual reality is in, but you shouldn't have to drop hundreds of dollars to gain access to the technology behind it. Luckily, that's... |
C$51.75 |
|
Replaced - SparkFun RedBoard - Programmed with ArduinoRetired: This product has been replaced by a new version. This page is for your reference only. Description: At SparkFun we use many Arduinos and... |
C$27.53 |
|
Replaced - SparkFun Load Cell Amplifier - HX711Description: The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.... |
C$13.73 |
|
Replaced - SparkFun Inventor's Kit - v4.1Retired: This product has been replaced by a newer version. This page is for your reference only. Description: The SparkFun Inventor's Kit (SIK) is a... |
C$147.59 |
|
Replaced - SparkFun Inventor's Kit - V3.1Retired: This product has been updated to a newer: version 3.2 Description: The SparkFun Inventor's Kit (SIK) is a great way to get started... |
C$137.93 |