New Products
WiFi Module - ESP8266 (4MB Flash)

In Stock: 10

Add:
WiFi Module - ESP8266 (4MB Flash)
Model: WRL-17146
$6.95

Weight: 0.015Kg


Description: The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your...
... more info
AVR 8 Pin 20MHz 8K 4A/D - ATtiny85

In Stock: 19

Add:
AVR 8 Pin 20MHz 8K 4A/D - ATtiny85
Model: COM-09378
Manufacturer: Atmel Corporation

$3.25

Weight: 0.015Kg


Description: Atmel's itty-bitty ATtiny85 8-Bit Processor. 8K of program space, 6 I/O lines, and 4-channel 10 bit ADC. Runs up to 20MHz with external...
... more info
SparkFun Qwiic Ultrasonic Distance Sensor - HC-SR04

In Stock: 2

Add:
SparkFun Qwiic Ultrasonic Distance Sensor - HC-SR04
Model: SEN-17777
Manufacturer: Sparkfun

$16.50

Weight: 0.05Kg


Description: You may be familiar with the classic HC-SR04 distance sensor, it is great for providing non-contact distance readings from 2cm to...
... more info
SparkFun QwiicBus - EndPoint

In Stock: 4

Add:
SparkFun QwiicBus - EndPoint
Model: COM-16988
Manufacturer: Sparkfun

$10.95

Weight: 0.05Kg


Description: The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses...
... more info
SparkFun Qwiic MultiPort

In Stock: 5

Add:
SparkFun Qwiic MultiPort
Model: BOB-18012
Manufacturer: Sparkfun

$2.25

Weight: 0.015Kg


Description: Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic...
... more info
Solenoid with lock style slug -12v

In Stock: 23

Add:
Solenoid with lock style slug -12v
Model: CK-3100
$12.95

Weight: 0.2Kg


Description: "Cluck" that is what you hear when this solenoid gets energized. The sort of noise that makes you know the door (or what-ever) is now...
... more info
Proto Shield - PCB ONLY

In Stock: 10

Add:
Proto Shield - PCB ONLY
Model: CK-3077
$4.95

Weight: 0.015Kg


Description: Prototyping shield for Arduino. Great for use as a basic shield or as a nice stand alone prototyping board. This is just the PCB, if you...
... more info
Stepper Motor - 200 Steps/rev - attached cable

In Stock: 2

Add:
Stepper Motor - 200 Steps/rev - attached cable
Model: CK-3010
$14.95

Weight: 2Kg


Description: A mid-size 4 wire stepper motor. This one most commonly found in 3D printers, and electro mechanical prototypes. These come with a...
... more info
Piezo breakout board with Piezo

In Stock: 9

Add:
Piezo breakout board with Piezo
Model: CK-BOB-2027
$4.55

Weight: 0.02Kg


Description: This breakout board allows you to more easily connect a piezo to your microprocessor. When a piezo senses a vibration it outputs an AC...
... more info
10k Linear Rotary Potentiometer

In Stock: 30

Add:
10k Linear Rotary Potentiometer
Model: CK-1088
$0.85

Weight: 0.019Kg


Description: A 10k potentiometer, great for using as a voltage divider. This pot has a 1/4" mounting diameter and has a 10K linear taper. Comes with...
... more info

Desktop Version
Copyright © 2021 SpikenzieLabs
wabusiness template