| Product Image |
Item Name- |
Price |
 |
Update alert! The new ShiftBrite V2.0 is a redesigned and improved verson of the original ShiftBrite. Here are the major differences: New mounting... |
$4.99
|
 |
Update alert! The new Headerless ShiftBrite V2.0 is a redesigned and improved verson of the original ShiftBrite. Here are the major differences: New... |
$4.99
|
 |
The MegaBrite is an upgraded version of the ShiftBrite. It uses the same A6281 controller chip with simple SPI daisy chained control, but uses... |
$9.99
|
 |
The Satellite Module 001 is an 10 LED array of five-chip 100mA wide-angle (140 degree) red, green, and blue LEDs. The percieved output power of the... |
$16.99
|
 |
The Satellite Module 003 is a 12V RGB LED bar with three bright surface-mount RGB LEDs. It has a 2x3 pin header that matches the pinout on the... |
$2.99
|
 |
The ShiftBrite Shield is a simple adapter that fits on top of standard Arduino controllers. It provides a ShiftBrite connector already wired to the... |
$9.99
|
 |
The Shifty VU Shield provides easy connection and filtering of audio input for the purpose of developing sound-reactive Arduino projects. It... |
$17.99
|
 |
The ShiftBar is a medium-power RGB LED controller, capable of powering three channels of LEDs from 10mA to 150mA and from 5V to 17V. It's ideal for... |
$8.99
|
 |
This cable is ideal for connecting ShiftBrite RGB LED modules in series. The overall length is ~2.0 inches, enough to connect ShiftBrites that are... |
$1.49
|
 |
This cable is ideal for connecting ShiftBrite RGB LED modules in series. The overall length is ~4.75 inches, enough to connect ShiftBrites that are... |
$1.59
|
 |
This cable is ideal for connecting ShiftBrite RGB LED modules in series. The overall length is ~8 inches, enough to connect ShiftBrites that are... |
$1.79
|
 |
This cable is ideal for connecting ShiftBrite RGB LED modules in series. The overall length is ~12.75 inches, enough to connect ShiftBrites that are... |
$1.99
|
 |
This cable is ideal for connecting ShiftBrite RGB LED modules in series. The overall length is ~19.75 inches, enough to connect ShiftBrites that are... |
$2.39
|
 |
This cable is ideal for connecting ShiftBrite RGB LED modules in series. The overall length is ~28.5 inches, enough to connect ShiftBrites that are... |
$2.79
|
 |
The Centipede Breadboard Breakout makes it easy to route signals from a Centipede Shield to a breadboard, or as a soldering location for individual... |
$2.49
|
 |
The Centipede Breakout is an easy way to wire up switches, sensors, LEDs, or other devices to a Centipede Shield. Using a length of 20-Conductor... |
$4.99
|
 |
The Centipede Shield is an add-on PCB for standard layout (Duemilanova, Diecimila) Arduino microcontroller boards. It uses the Wire I2C interface ... |
$19.99
|
 |
A fresh CR1632 3V lithium battery is included with every purchase. NEW: ChronoDot V2.1 released! The new ChronoDot has been completely reconfigured... |
$14.99
|
 |
Version 2.0 Update As of April 28th, 2011, the OctoBrite CYANEA has been improved in version 2.0. New LEDs have been selected, resulting in a... |
$19.99
|
 |
The OctoBrite DEFILIPPI is a unique product that allows independent control of eight RGB LEDs or 24 individual LEDs. It is based on a Texas... |
$19.99
|
