Chargers - Boosters
Product Image | Item Name- | Price |
---|---|---|
5V DC to DC Step Up - VPack PCBDescription: The is a wonderfully simple 5V power source from Bodhilabs. This PCB uses a source of 1.1V to 4.5V and generates 5V using a DC to DC... |
$9.95 |
|
5v USB Battery Booster / ChargerThis is the guts of what you will find inside a small USB battery pack. Popular as a recharge source for your devices on the go. Attach a 3.7V Lipo... |
$7.95 |
|
Adafruit Mini Lipo w/Mini-B USB Jack - USB LiIon/LiPoly chargerDescription: Oh so handy, this little lipo charger is so small and easy to use you can keep it on your desk or mount it easily into any project!... |
$7.95 |
|
Adafruit MiniBoost 5V @ 100mA Charge Pump - AP3602ADescription: This adorable little board will come in very handy whenever you need a small amount of 5V power. It's the size of a linear regulator,... |
$2.95 |
|
DC to DC 5V Boost ConverterDescription: DC to DC Step up converter Specifications: Supply a minimum of 0.9V DC to this boost converter, and get 5v coming out of the USB port.... |
$4.95 |
|
Inductive Charging Set - 5V @ 500mA maxInductive charging is a way of powering a device without a direct wire connection. Most people have seen inductive charging in a rechargable electric... |
$9.95 |
|
LiPo Charger Basic - Mini-USBDescription: If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer... |
$8.95 |
|
LM2587 DC to DC Boost - Step Up ConverterDescription: Supply 3.5v to 30v and manually adjust the output from 4v to 30v at a 5A. Specifications: Be sure to install in a well ventilated area.... |
$12.95 |
|
PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A -Description PowerBoost 1000C is the perfect power supply for your portable project! With a built-in load-sharing battery charger circuit, you'll be... |
$19.95 |
|
PowerBoost 500 Basic - 5V USB Boost @ 500mA from 1.8V+Description: PowerBoost is the perfect power supply for your portable project! This little DC/DC boost converter module can run from 1.8V batteries... |
$9.95 |
|
SparkFun LiPo Charger/Booster - 5V/1ADescription The SparkFun 5V/1A LiPo Charger/Booster is a no-nonsense circuit for generating one amp from a Lithium Polymer battery at 5V. This LiPo... |
$17.50 |
|
SparkFun LiPower ShieldDescription: Is there anything an Arduino can’t do? Well, for one, most of them can’t be powered directly from a 3.7V LiPo battery; much less... |
$29.95 $20.97 Save: 30% off |
|
Tiny Simple Lipo ChargerDescription: Tiny Simple Lipo Charger Specifications: Sometimes it's great to have an integrated charging solution for your project / prototype. With... |
$3.95 |
|
USB LiPoly Charger - Single CellDescription: If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The USB LiPo Charger is a basic charging... |
$14.95 $11.21 Save: 25% off |
|
Adafruit PowerBoost 500 Shield Rechargeable 5V Power ShieldDescription: What's a project if it's trapped on your desk? Now you can take your Arduino anywhere you wish with the PowerBoost shield! This... |
$19.95 |
|
SparkFun Sunny Buddy - MPPT Solar ChargerDescription: This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger... |
$28.95 |