Keypads
Product Image | Item Name- | Price |
---|---|---|
1 Button KeypadDescription: 1 Button membrane button Specifications: A single button flat membrane keyboard. Specifications say that it will run up to 12v. We would... |
$0.95 |
|
1 x 4 Button KeypadDescription: 4 Button Keyboard Matrix Specifications: 4 Button flat membrane keyboard. Specifications say that it will run up to 12v. We would... |
$2.15 |
|
4 x 4 Matrix Membrane KeypadDescription: 4 x 4 Matrix Array 16 Key Membrane Switch Keypad Keyboard Specifications: Contact resistance of 500 (ohm) Insulation resistance 100M... |
$3.95 |
|
SparkFun Qwiic Keypad - 12 ButtonDescription: Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write... |
$11.50 |
|
TTP229 16-way capacitive touch boardDescription: The TTP229 16-way capacitive touch switch digital touch sensor module Specifications: The TTP229 is capacitive sensing design... |
$9.95 |
|
Touch ShieldDescription: The MPR121 IC is a great way to build simple capacitive touch interfaces, and now it's even easier to incorporate into your Arduino... |
$14.95 $8.97 Save: 40% off |
|
Keypad - 12 ButtonDescription: A basic 12 button keypad for user input. The buttons are setup in a matrix format. This allows a microcontroller to 'scan' the 7 output... |
$5.95 |
|
Keypad - 16 Keys - Black KeysDescription: A simple to use 16 key keypad. All of the rows and columns are brought out to an eight pin connector on the bottom. These keypads work... |
$7.50 |
|
Button Pad 2x2 - LED CompatibleDescription: This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org . Each button has a hole... |
$2.95 |
|
Button Pad 4x4 - LED CompatibleDescription: This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole... |
$9.95 |
|
Button Pad 2x2 - Breakout PCBDescription: This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered... |
$4.95 |
|
Button Pad 4x4 - Breakout PCBDescription: This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered... |
$9.95 |
|
Triple Output LED RGB - Diffused - 25pcsDescription: We all know that you can never get too many LEDs. Don't worry, we've got you covered. This is a pack of 25 LEDs all conveniently... |
$19.95 |
|
Membrane 3x4 Matrix Keypad + extras - 3x4Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin,... |
$4.95 |