Description: NeoPixels in 5mm through-hole variety? Oh yes, we haz them! If you like NeoPixel strips you'll luv these 5mm diffused through-hole NeoPixels. All the single-pin-controlling-hundreds-of-LEDs goodness in a breadboard friendly format. Each LED looks just like a shorter version of the classic through-hole 5mm RGB LED with 4 legs, but instead of just red/green/blue there's a little chip inside that can control the LED with high speed PWM for 24-bit color.
These are the diffused type instead of the Neopixel Clear 5mm LEDs. They look a lot like the 8mm variety but are smaller.
Power them with 5V and chain them together, tying the Data-Out pin of one to the Data-in of the previous one in the chain. If you're using an Arduino, you can control these LEDs with our wonderfully-written Neopixel library for Arduino. They also work great with our Trinkets. Note that these are "RGB" instead of "GRB" format used in the 5050-sized LEDs you are so used to. Check in the NeoPixel example code for how to swap the colors automagically.
These great looking LEDs are also fast and responsive with a milky-diffusing lens for a soft look.
Everything you need to know at our Neopixel UberGuide!
Technical Details:
Specs:
- As of Feb 14, 2021 - we are shipping a slightly different, but physically compatible version. The new version does not have a 'blue flicker' on startup like before, it stays off until data is received. Current per LED is 12mA max instead of 18mA. The shape, pins, and pin-out are identical, however the color and brightness may be slightly different and noticeable if the two versions are next to each other.
Specs:
- Weight: 0.3g
- WS2812 Datasheet
- SK6812 Datasheet
- May ship with either WS2812B or SK6812-based LEDs. They are the same brightness, color and protocol
- We don't have a datasheet for the LEDs themselves yet, see the photos above for the pinouts.
- The leads are flexible. The spacing starts at 1.1mm (0.04") but we were able to bend them as needed.
U.S. - English + Int.
