Description: This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. Adafruit particularly likes this speaker as it is small and comes with nice skinny wires with a connector on the end. It has a handy "Molex PicoBlade" 1.25mm pitch 2-pin cable, which makes plugging into a board easy. Or you can cut off the connector and just solder/clamp onto the wires directly.
This speaker has a short ~10mm long cable. Which comes with a Molex PicoBlade 1.25mm pitch 2-pin connector.
This speaker will work well with any of the mono audio amps, such as the PAM8302 amplifiers.
Technical Details:
- Weight: 3g
- Dimensions: 30mm x 20mm x 5 / 1.18" x 0.78" x 0.19"
Documentation: