Description: Nice easy to use float switch. Use it to monitor water levels. Inside the float switch is a sealed reed switch surrounded by a sealed magnet in the round float to activate the reed switch. Comes with a threaded shaft with plastic bolt for mounting.
When the float is down (not floating) the circuit is closed and current will flow through the switch. Once to float is activated (by floating) the circuit is broken.
Use it to control valves, pumps, overflow alarms etc ...
Note: We recommend only connect this float switch to a controller / driver and not directly to a pump motor or valve. These high current devices can easily destroy the low current reed switch inside the float switch.
Specs:
- Body length: 4.15cm
- Float width: 19mm
- Float travel: 7mm
- Treaded shaft width: 8mm [1/4"]
- Wire length: 37cm
- Rated current: 100 mA max
- Rated voltage: 100 VDC max