Arduino Ethernet Rev3 WITHOUT PoE

$49.80

  • Model: A000068
  • Shipping Weight: 0.1Kg
  • -20 Units in Stock
  • Manufactured by: Arduino

Additional Images



The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. The Arduino USB-to-Serial adapter or any FTDI-style USB-to-serial connector can be used to program it.

A separate power-over-Ethernet (PoE) module can be soldered to the board to provide power from a conventional twisted pair Category 5 Ethernet cable. It is IEEE802.3af compliant, and works with all compliant PoE injectors currently available.

Compatible with PoE Module 12V (X000002).

Technical specifications

  • Microcontroller: ATmega328
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limit): 6-20V
  • Digital I/O Pins: 14
  • PWM Digital I/O Pins: 4
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 40 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB
  • Flash Memory for Bootloader: 0.5 KB
  • SRAM:2 KB
  • EEPROM: 1 KB
  • Clock Speed: 16 MHz
  • Length: 68.6 mm
  • Width: 53.3 mm
  • Weight: 28 g


Add to Cart:


wabusiness template