Description: The Xprotolab Portable is a small mixed signal oscilloscope with an arbitrary waveform generator and protocol sniffer.
Features:
- Mixed Signal Oscilloscope: Simultaneous sampling of analog and digital signals.
- Advanced Trigger: Normal / Single / Auto, with rising or falling edge and adjustable trigger level.
- Meter Mode: Average, Peak to peak and Frequency readout.
- XY Mode (Plot Lissajous patterns or see the phase difference between two waveforms).
- Spectrum Analyzer with different windowing options and selectable vertical log.
- Horizontal and Vertical Cursors with automatic waveform measurements.
- Arbitrary Waveform Generator with Sweep on all parameters.
- Display options: Persistence, Different grid options, and more.
General Specifications:
- ATXMEGA32A4U 36KB Flash, 4KB SRAM, 1KB EEPROM
- Graphic OLED display 0.96", 128x64 pixels
- PDI interface.
- 4 tactile switches
- USB connectivity: Windows, Android
Oscilloscope specifications:
- 2 Analog Inputs
- Maximum Sampling rate: 2MSPS
- Analog Bandwidth: 200kHz
- Resolution: 8bits
- Input Impedance: 1MΩ
- Buffer size per channel: 256
- Input Voltage Range: -14V to +20V
Logic Analyzer specifications:
- 8 Digital Inputs, 3.3V level.
- Maximum sampling rate: 2MSPS
- Frequency counter: 12Mhz
- Protocol Sniffer: UART, I2C, SPI
- Internal pull up or pull down.
- Buffer size: 256
AWG specifications:
- 1 Analog Output
- Maximum conversion rate: 1MSPS
- Analog Bandwidth: 44.1kHz
- Resolution: 8bits
- Output current > +/- 7mA
- Buffer size: 256
- Output Voltage: +/- 2V
Dimensions: 3.3" x 1.75"
Documents:
Xprotolab Portable Kit Contents:
- Xprotolab Portable oscilloscope
- 1x Logic analyzer probe
- 2x Hook clip probes
- Micro USB Cable: 3ft