The Three Fives Kit: A Discrete 555 Timer

$40.00

  • Model: EMS555
  • Shipping Weight: 0.1Kg
  • 0 Units in Stock
  • Manufactured by: Evil Mad Scientist Laboratories

Additional Images





Overview

The "Three Fives" Discrete 555 Timer kit from Evil Mad Scientist Laboratories is a faithful and functional transistor-scale replica of the classic NE555 timer integrated circuit, one of the most classic, popular, and all-around useful chips of all time.

The Three Fives kit was designed by Eric Schlaepfer, in collaboration with Evil Mad Scientist Laboratories. The kit is lovingly designed to resemble an (overgrown) integrated circuit, based around an extra-thick matte-finish printed circuit board. It comes complete with a tough and sturdy plastic stand that gives the circuit board eight legs in the shape of DIP-packaged integrated circuit pins.

Download Datasheet (1.1 MB PDF file).

Building the kit

The Three Fives kit is sold as an easy-to-build soldering kit. It includes the circuit board, resistors, and transistors that make up the electrical circuit as well as printed assembly instructions. The kit also comes complete with the "IC Leg" stand, and 8 color coded thumbscrew terminal posts.

To build the Three Fives kit, basic electronic soldering skill and tools are required, but no additional knowledge of electronics is presumed or required. You provide standard soldering tools: a soldering iron + solder and small ("flush") wire clippers, as well as a Phillips head screwdriver

The kit features easy "through-hole" construction ("No surface-mount nothin' nowhere!"), and (assuming that you have prior soldering experience) should take roughly an hour to build.

Using the "Three Fives" Discrete 555 Timer

The Three Fives circuit is a direct implementation of the "equivalent circuit" from the NE555 datasheet, built up using resistors and individual 2N3904 and 2N3906 transistors. It comes with terminal posts and solder points so that you can actually connect to it and build up classic 555 timer and oscillator circuits. Using those terminal posts and solder points, you can hook up with with bare wires, lugs, alligator clips, and/or solder joints-- however you see fit.

And unlike the chip version, you can even hook up probes to monitor what goes on inside the circuit.

There are a remarkably large number of excellent 555 example circuits available on the internet (for example, over 100 here).

While the Three Fives kit will work without modification in the majority of example circuits, some performance characteristics are different than those of 555 integrated circuits; please refer to the Absolute Maximum Ratings and Electrical Characteristics in the datasheet for additional details. One particular difference to keep in mind: when both (A) operating with a power supply above 6.5 V and (B) the circuit calls for the RESET pin to be held high, do not connect RESET directly to the power supply, but do so through a resistor of ~100k value.

Additional specifications

Kit size

  • The Three Fives kit printed circuit board is 5.215 X 3.175 inches (13.25 X 8.06 cm) in area, and (nominally) 0.100" (2.54 mm) thick.
  • Including the "IC Leg" stand and terminal posts, the overall size of the assembled kit is nominally 5.215 X 3.9 X 1.70 inches (13.25 X 9.9 X 4.3 cm).

Materials and construction

  • The "IC Leg" stand consists of two pieces of machined and formed semi-rigid PVC (plastic) foam, each held to the circuit board with machine screws.
  • The circuit board in the kit comes pre-fitted with eight 8-32 threaded inserts for the terminal posts.
  • The included terminal post screws are stainless steel thumbscrews with color-coded plastic caps (1 red, 1 black, 6 gray)

Other specifications are given in the kit's datasheet (1.1 MB PDF file).


Add to Cart:


wabusiness template