Please note: These products have been retired and are no longer available from their respective manufactures.
Do not order these parts on back-order, if there is no stock we can not get more.
Please note: These products have been retired and are no longer available from their respective manufactures.
Do not order these parts on back-order, if there is no stock we can not get more.
Product Image | Item Name | Price+ |
---|---|---|
Retired - Handset Connector 4-pin RJ-9Description: This is a 4-pin connector commonly found on phone handsets. Great for simple TX/RX/PWR/GND connections. Sometime referred to as RJ9 or... |
$0.10 |
|
Scrap PCBDescription: These are PCB boards that we are scrapping. Some are older versions of current products, some discontinued, and others are... |
$0.25 |
|
Retired - JST SH Jumper 3 Wire Assembly - 8"Description: This is a simple three wire cable. Great for jumping from board to board or just about anything else. These cables mate with the... |
$0.50 |
|
Retired - Silicone Bumpers - Small (8x2mm, 4 pack)Description: Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or... |
$0.50 |
|
Retired - Rocker Switch - MediumDescription: The rocker switch is a classic and this one is a great size for an unobtrusive on/off switch. It can be panel mounted and has two tabs... |
$0.55 |
|
Retired - Push Button 33mm - BlueDescription: This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$0.95 |
|
Retired - RFID Reader BreakoutRetired: This product has been replaced by a newer version. This page is for your reference only. Description: This is a simple breakout board for... |
$0.95 |
|
Retired - Serial/Analog Mux/Demux 74HC4052Description: If you've ever needed to hook multiple serial devices to one microcontroller, you understand how much of a problem it can be. The... |
$0.95 |
|
Retired - Thumbwheel Potentiometer - 10k Ohm, LinearDescription: Thumbwheel potentiometers are really handy when you don't have space on your enclosure for a knob and you still need access to a tuning... |
$0.95 |
|
Retired: In-line power wire connector (male)DESCRIPTION: If you have a project where you'd like to be able to detach the wiring, this wire will fit the bill. Its a JST 2.5mm 'free hanging'... |
$1.00 |
|
Retired - 4 Pin Molex Connector - PigtailDevelopment: The 4-pin Molex connector is pretty standard for disk drives and things like that but it's also a great general purpose power connector.... |
$1.50 |
|
Retired - Audio Jack - 1/4" Stereo (vertical)Description: This is the kind of 1/4" stereo jack you might find in home stereos and PA systems. Switched contacts allow you to detect whether or not... |
$1.50 |
|
Retired - Magnetic Snap 10mmRetired: This product is no longer available. This page is for your reference only. Description: A snap is fun, but a magnetic snap adds a whole new... |
$1.50 |
|
Retired: ADNS2620 - Optical Mouse Sensor ICRetired: This product is no longer available. This page is for your reference only. Description: The ADNS2620 is an easy to use entry level, small... |
$1.55 |
|
Retired - Flexible Coolant Pipe - 1ft (1/2")Retired: This product has been replaced by the a newer version. This page is for your reference only. Description: These plastic Flexible Coolant... |
$1.95 |
|
Retired - Key Switch - MediumDescription: Have you ever wanted to start your widget the same way you start your car? These key switches are the key to making that happen. This... |
$1.95 |
|
Retired - LilyPad Bright White LEDDescription: A simple, very bright, 250mcd, white LED LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah... |
$1.95 |
|
Retired - RFID Tag - 125kHzRetired: This product has been updated to a newer: version. Description: This is a basic RFID tag used for presence sensing, etc. Works in the 125kHz... |
$1.95 |
|
Retired - Stomp Switch - DPDTDescription: These are the sturdy little stomp switches that you find on guitar effects pedals. They're DPDT on/on type switches which mount into a... |
$1.95 |
|
Retired - Super Capacitor - 0.2F/3.3VDescription: This tiny surface mount capacitor has a total capacity of 0.2F, which is a lot for something so small. This small cap can be charged up... |
$1.95 |
|
Retired - Multipurpose Circuit Board - 332 holesMultipurpose prototyping Circuit Board Take your projects from your bread board and make them permanent by soldering them onto a prototyping circuit... |
$1.99 |
|
Retired - Breakout Board for USB microBDescription: This simple board breaks out a micro-B USB connector's VCC, GND, D- and D+ pins to a 0.1" pitch header. If you want to add the... |
$2.00 |
|
Retired - Hobby MotorDescription: Here is a basic hobby motor. It works well for basic things like making a fan or spinning something very fast without much resistance.... |
$2.00 |
|
Retired - Centipede Breadboard BreakoutThe Centipede Breadboard Breakout makes it easy to route signals from a Centipede Shield to a breadboard, or as a soldering location for individual... |
$2.49 |
|
Retired - 7-Segment Display Large - RedDescription: This is a basic large, 1-digit 7-segment display - Red in color. It has a common anode. The display features two decimal points. The... |
$2.50 |
|
Retired - Message Pump - PCB ONLYThis is the bare PCB to make your own message pump. This PCB can also be used as an adaptor to convert a 2x7 (14 pin) old style LCD display to a... |
$2.50 |
|
Retired - Multipurpose Circuit Board - 400 holesMultipurpose prototyping Circuit Board Take your projects from your bread board and make them permanent by soldering them onto a prototyping circuit... |
$2.50 |
|
Retired - Tweezers - Heavy DutyDescription: Basic 4.5" high-carbon stainless steel curved tweezers for holding components during soldering. These are pretty burly tweezers!... |
$2.50 |
|
Retired - 700mm - 27" Cable, 6 ConductorsThis cable is ideal for connecting ShiftBrite RGB LED modules in series. The overall length is ~28.5 inches, enough to connect ShiftBrites that are... |
$2.79 |
|
Retired - Bubble Display - 7-Segment (4-digit)Sorry, this product is no longer available. Description: This is the HP QDSP-6064 bubble display, a tiny, 4-digit, 7-segment numerical indicator.... |
$2.95 |
|
Retired - Lilypad Battery ConnectDescription: The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your LilyPad... |
$2.95 |
|
Retired - Plastic Bobbin of Conductive Thread - 30'Retired: This product has been replaced by Bobbin - 30ft (Stainless Steel). Description: This is 30ft of high quality 4-ply conductive thread on a... |
$2.95 |
|
Retired - Rotary DIP Switch - 16 PositionDescription: Rotary switches are nice for being able to select up to 16 different states in a small package. With only 6 pins (2 of which are... |
$2.95 |
|
Retired - Toggle Switch - 3PDTDescription: This heavy-duty, 3-pole, double throw toggle switch is rated for up to 15 Amps of current. It can be panel mounted with a 7/16" hole. ... |
$2.95 |
|
Retired: Hemostats - StraightDescription: 5" hemostats with a straight tip. We use them exclusively to hold small SMD parts in place while soldering. A must have for any... |
$2.95 |
|
Retired - Multipurpose Circuit Board - 708 holesMultipurpose prototyping Circuit Board Take your projects from your bread board and make them permanent by soldering them onto a prototyping circuit... |
$2.99 |
|
Retired - Satellite Module 003 - For OctoBrite DEFILIPPIThe Satellite Module 003 is a 12V RGB LED bar with three bright surface-mount RGB LEDs. It has a 2x3 pin header that matches the pinout on the... |
$2.99 |
|
Retired - Multipurpose Circuit Board - 800 holesDescription: Multipurpose prototyping circuit board. Take your projects from your bread board and make them permanent by soldering them onto a... |
$3.25 |
|
Retired - Satellite Module 004 - For OctoBrite DEFILIPPIThe Satellite Module 004 is a 12V RGB LED round pixel with three bright surface-mount RGB LEDs. It has a 2x3 pin header that matches the pinout on... |
$3.49 |
|
Retired - Mini Speaker 15mmRetired: This product has been retired. This page is for your reference only. This is a very small speaker that fits onto the VoiceShield circuit... |
$3.50 |
|
Replaced - MOSFET Power Control KitDescription: This MOSFET power control kit is basically a breakout for a RFP30N06LE MOSFET. We give you terminal blocks for connecting wires in and... |
$3.95 |
|
Replaced - Rotary Encoder - Illuminated (RGB)Retired: This product has been replaced by a newer version. You may still purchase these as long as they are in stock. This page is for your... |
$3.95 |
|
Replaced - Tweezers - StraightReplaced: This product has been replaced by the Tweezers - Straight (ESD Safe). This page is for your reference only. Description: These are high... |
$3.95 |
|
Retired - Breadboard - Mini Modular (Red)Description: This Mini Breadboard is a great way to prototype your small projects! With 170 tie points there's just enough room to build and test... |
$3.95 |
|
Retired - Flush CuttersDescription: These are high quality flush cutters giving you a way to cut leads very cleanly and close to the solder joint. Diagonal cutters are... |
$3.95 |
|
Retired - Lilypad Coin Cell Battery HolderDescription: If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick.... |
$3.95 |
|
Retired - LilyPad LED White (5pcs)Retired: This product has been replaced by a new version. This page is for your reference only. Description: A simple, very bright, 250mcd, white LED... |
$3.95 |
|
Retired - Long Nosed PliersDescription: These pliers are perfect in situations where your standard needle nose pliers are a bit too wide and a pair of tweezers just isn't... |
$3.95 |
|
Retired - Tweezers - CurvedThese tweezers have been replaced by a this model. Description: These are high quality, fine tip, curved tweezers. A must have for almost any type of... |
$3.95 |
|
Retired - Wall Charger - 5V USBRetired: This product has been replaced by the Wall Charger - 5V USB 1 AMP. This page is for your reference only. Description: High quality switching... |
$3.95 |