The Musixel (Board only)

$14.95

  • Model: SPL-022123
  • Shipping Weight: 0.02Kg
  • 8 Units in Stock
  • Manufactured by: SpikenzieLabs




Description: The Musixel adds color to your music. Attach it to your music source (MP3 player, phone, computer, stereo etc…) and the Musixel will convert the frequencies that it hears into colors.

There are nine different colorful modes for the LEDs to display. The colors vary by frequency and volume. Some modes display traditional style graphic equalizer bars, some pump all LEDs colorfully at the same time and others display a full rainbow of colors. There is a mode for everyone!

The Musixel works with all types of music. In most modes it converts frequencies into colors where the low notes 63 to 160hz are red, mid notes 1000 to 2500hz are green and high notes 6250 to 16000hz are blues. When the Musixel hears multiple frequencies at the same time it mixes the primary colors into a huge variety of colors. The louder the music, the brighter the LEDs.

Simple to assemble and easy to hook-up. This version of the Musixel requires soldering. It is an easy kit to assemble with only four parts to solder on.

NOTE: This version of the Musixel only includes the Musixel PCB with pre-soldered and programmed SMD parts. You will need to solder on the included audio jack, mode button, DC power jack and screw terminals, (if you choose to). We are leaving these parts off so that you can either solder the Musixel directly to wires connected to your project, or solder on the connectors and use it in a more traditional way.

Features:

  • Converts frequencies to colors
  • Converts audio volume to brightness
  • Nine colorful modes
  • Comes with a strip of 16 LEDs
  • Expandable to 64 LEDs (any WS2811, WS2812(B) or Neopixels will work)
  • Includes most common audio wires for hook-up
  • Easy to solder - only four through hole parts

What you get:
  • Musixel Board (with pre-soldered and programmed SMD parts)
  • Parts: Audio jack, screw terminal, button and DC power jack
What you also need:
  • LED - from 1 to 64 LEDs (any WS2811, WS2812(B) or Neopixels will work)
  • 5v 2 amp power adapter (ONLY USE 5 volts)
  • Audio cables and audio splitters as needed.
  • Music (MP3 player, computer, radio etc …)
  • Powered speakers or headphones (with a standard 3.5mm plug)
Tools required:
  • Soldering Iron
  • Solder
  • Flush cutters
  • Small flat blade screwdriver
Instructions:

Add to Cart:


wabusiness template