DESCRIPTION LEDs and passives and transistors and switches and op-amps oh my! The Adafruit Parts Pal is the great companion for an entry-level maker learning electronics. This kit is your friend whenever you need to build up a project. It contains many of the most popular components and prototyping parts all wrapped up in one parts pack so you can open up and dig right in.
Kit Contents:
Prototyping:
- 1x - Storage box with latch
- 1x - Half-size breadboard
- 20x - Male/male jumper wires - 3" (75mm)
- 10x - Male/male jumper wires - 6" (150mm)
LEDs:
- 5x - 5mm Diffused green LEDs
- 5x - 5mm Diffused red LEDs
- 1x - 10mm Diffused Common-Anode RGB LED
Capacitors:
- 10x - 1.0uF Ceramic capacitors
- 10x - 0.1uF Ceramic capacitors
- 10x - 0.01uF Ceramic capacitors
- 5x - 10uF 50V Electrolytic capacitors
- 5x - 100uF 16V Electrolytic capacitors
Resistors:
- 10x - 560 ohm 5% axial resistors
- 10x - 1K ohm 5% axial resistors
- 10x - 10K ohm 5% axial resistors
- 10x - 47K ohm 5% axial resistors
Semiconductors:
- 5x - 1N4001 Diodes
- 5x - 1N4148 Signal Diodes
- 5x - NPN Transistor PN2222 TO-92
- 5x - PNP Transistor PN2907 TO-92
- 2x - 5V 1.5A Linear voltage regulator - 7805 TO-220
- 1x - 3.3V 800mA Linear voltage regulator - LD1117-3.3 TO-220
- 1x - TLC555 wide-voltage range, low-power 555 Timer
- 1x - LM358 Dual operational Amplifier
Sensors:
- 1x - Photocell
- 1x - Thermistor (Breadboard version)
- 1x - Vibration sensor switch
- 1x - 10K Breadboard trim potentiometer
- 1x - 1K Breadboard trim potentiometer
Mechanical:
- 1x - Piezo buzzer
- 5x - 6mm Tactile switches
- 3x - SPDT slide switches
- 1x - 40-pin Break-away male header strip
- 1x - 40-pin female header strip
Revision history
- As of July 20, 2016 they now include an LM358 dual opamp!
- Thermistor
- Resistance at 25 degrees C: 10K +- 1%
- B25/50 = 3950+- 1%
- Thermal time constant <= 15 seconds
- Thermistor temperature range -55 °C to 125 °C