Sparkfun
Product Image | Item Name- | Price |
---|---|---|
SSOP to DIP Adapter 28-PinDescription: 8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be... |
$3.95 |
|
SSOP to DIP Adapter 8-PinDescription: 8, 16, 20, and 28-Pin SSOP to DIP break out boards. The footprint was rotated to accommodate different width SSOP devices and can be... |
$2.95 |
|
LilyPad Tri-Color LEDDescription: Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can... |
$7.95 |
|
LilyPad LED Green (5 pieces)Description: Here is a simple 5 pack of green LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable... |
$4.95 |
|
LilyPad LED Yellow (5 pieces)Description: Here is a simple 5 pack of yellow LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable... |
$4.95 |
|
Retired - LilyPad Bright White LEDDescription: A simple, very bright, 250mcd, white LED LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah... |
$1.95 |
|
Retired - LilyPad LED Blue (5 pieces)Retired: This product has been replaced by a new version. This page is for your reference only. Description: Here is a simple 5 pack of blue LEDs for... |
$4.95 |
|
Retired - LilyPad LED Red (5 pieces)Retired: This product has been replaced by a newer version.. This page is for your reference only. Description: Here is a simple 5 pack of red LEDs... |
$4.95 |
|
Concave Button - RedDescription: This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$2.95 |
|
LilyPad Accelerometer ADXL335Description: This is a three axis accelerometer for the LilyPad system. Based on the ADXL335 accelerometer from Analog Devices, the LilyPad... |
$17.95 |
|
LilyPad Temperature SensorDescription: Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output... |
$5.50 |
|
Raspberry Pi - 8GB SD CardDescription: This is an 8GB micro SDHC card that is pre-installed with the NOOBS operating system for the Raspberry Pi. NOOBS is actually a system... |
$12.95 |
|
Retired - EasyDriver v3 Stepper Motor DriverRetired: This product has been replaced by the EasyDriver Stepper Motor Driver. This page is for your reference only. Description: EasyDriver v3 is a... |
$14.95 |
|
Concave Button - GreenDescription: This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$2.95 |
|
Concave Button - WhiteDescription: This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$2.95 |
|
Mini Push Button Switch - TallDescription: Miniature Single Pull Single Throw switches. These are high quality Omron type B3F momentary on switches. This switch has a very large... |
$0.50 |
|
Retired - Conductive Thread - 117/17 2plyRetired: This product is no longer available. We now have a better version made of stainless steel. Conductive Thread - 60g (Stainless Steel)... |
$32.95 |
|
Retired - Conductive Thread - 234/34 4plyRetired: This product is no longer available. We now have a better version made of stainless steel. Conductive Thread - 60g (Stainless Steel)... |
$34.95 |
|
Retired - LilyPad Vibe BoardRetired: This version has been replaced by a newer version of the Vibe Board. This page is for your reference only. Description: Apply 5V and be... |
$14.95 |
|
Solder Leaded - 15-gram TubeDescription: This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder... |
$1.95 |
|
Thin SpeakerDescription: If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.25W, 8Ohm speaker... |
$0.95 |
|
Retired - LilyPad BobbinDescription: This is dual-purpose bobbin with 30ft of high quality 4-ply conductive thread. Once the thread is gone, the bobbin doubles as a small... |
$4.95 |
|
SparkFun USB Mini-B Cable - 6 FootDescription: This is a USB 2.0 type A to Mini-B 5-pin cable. You know, the mini-B connector that usually comes with USB Hubs, Cameras, MP3 players,... |
$3.95 |
|
Coin Cell Holder - Sewable SMDDescription: This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in, pop-out feature that makes changing the... |
$1.25 |
|
Concave Button - BlueDescription: This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$2.95 |
|
Retired - Bluetooth DIP Module - Roving NetworksDescription: This is a simple DIP breakout for the Roving Networks Bluetooth® module. Two 0.1" headers allow easy and quick breadboarding. All... |
$59.95 |
|
Retired - Magnetic Snap 10mmRetired: This product is no longer available. This page is for your reference only. Description: A snap is fun, but a magnetic snap adds a whole new... |
$1.50 |
|
Concave Button - YellowDescription: This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$2.95 |
|
Mini Push Button Switch - SMDDescription: Miniature surface mount momentary button. These are great, low-profile momentary switches. Perfect as a tactile reset switch. Rated up... |
$0.95 |
|
Retired - Liquid Flux Pen - Water SolubleDescription: This is a water soluble liquid flux pen. A flux pen is a must have when performing any kind of solder rework. The flux is the substance... |
$4.95 |
|
Retired - Venus GPS Logger with SMA ConnectorReplacement: GPS-10920. The new version of this board is built with the Venus638FLPx-L, a more robust drop-in replacement for the Venus634LPx. This... |
$59.95 |
|
Solder Wick #2 5ft. - GenericDescription: Solder wick is a composed of copper threads braided together. Flux is normally added to help the solder flow from where it is not... |
$2.49 |
|
Replaced - USB Weather BoardDescription: Got weather? This board can handle it. The USB Weather Board includes onboard sensors for barometric pressure, humidity, temperature,... |
$124.95 |
|
Jumper Wires Premium 12" M/M Pack of 10Description: These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers... |
$4.50 |
|
Arduino ProtoShield KitDescription: Riding on the waves of the very popular Arduino USB board is this small prototyping shield. Originally spawned with collaboration... |
$16.95 |
|
Cherry MX Switch BreakoutDescription: Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to... |
$2.25 |
|
FTDI Basic Breakout - 3.3VDescription: This is the newest revision of the SparkFun FTDI Basic. Now using a SMD 6-pin header on the bottom, which makes it smaller and more... |
$16.95 |
|
FTDI Basic Breakout - 5VDescription: This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with... |
$13.95 |
|
FTDI Basic Breakout - 5vDescription: This is the newest revision of our FTDI Basic . We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact.... |
$16.50 |
|
Replaced - SparkFun Inventor's Kit - v4.1Retired: This product has been replaced by a newer version. This page is for your reference only. Description: The SparkFun Inventor's Kit (SIK) is a... |
$106.95 |
|
Replaced - Tool Kit - BeginnerRetired: This product has been replaced by a newer version. This page is for your reference only. Description: This assortment of tools is great for... |
$21.95 |
|
Retired - Arduino MegaShield KitDescription: The Arduino Mega now has its very own prototyping shield! The MegaShield mates with the Arduino Mega board and gives the user a... |
$17.95 $10.77 Save: 40% off |
|
Retired - FTDI Basic Breakout - 3.3VRetired: This version has been updated to a newer version FTDI Basic Breakout - 3.3V kit. This page is for your reference only. Description: This is... |
$14.95 |
|
SparkFun Inventor's Kit for Arduino Uno - v4.1Description: The SparkFun Inventor's Kit (SIK) for Arduino Uno is a great way to get started with programming and hardware interaction with the... |
$117.95 |
|
SparkFun Big Red Box Proto BoardDescription: The SparkFun Big Red Box Proto Board is a large, custom made PCB that has been specifically designed to be used with and installed into... |
$7.95 |
|
Pi WedgeDescription: This is the Pi Wedge, a small board that connects to the Raspberry Pi’s 26-pin GPIO connector, and breaks the pins out to... |
$6.95 |
|
Simon Says - Through-Hole Soldering KitDescription: This is the latest version of SparkFun's popular through-hole Simon Says Kit. They have made some changes to the board that should make... |
$28.95 |
|
Concave Button - BlackDescription: This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$2.95 |
|
Push Button 33mm - YellowDescription: This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$1.95 |
|
Retired - Push Button 33mm - BlueDescription: This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$0.95 |