Sparkfun
Product Image | Item Name- | Price |
---|---|---|
Replaced - SparkFun Load Cell Amplifier - HX711Description: The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.... |
$9.95 |
|
Replaced - SparkFun VR IMU Breakout - BNO080 (Qwiic)Description: Virtual reality is in, but you shouldn't have to drop hundreds of dollars to gain access to the technology behind it. Luckily, that's... |
$37.50 |
|
Replaced - SparkFun Weather ShieldReplaced by a newer version PN DEV-13956 Description: The Weather Shield is an easy to use Arduino shield that grants you access to barometric... |
$39.95 |
|
Replaced - Sunny Buddy - MPPT Solar ChargerDescription: This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger... |
$24.95 |
|
Retiired - MonoAmp - Sound Amplifier RetailDescription: This tiny audio amplifier is based on the Texas Instruments TPA2005D1. Its efficient class-D operation means low heat and long battery... |
$8.95 |
|
Retired - "Uh-oh" Battery Level Indicator KitDescription: Under-powering a digital device can sometimes have pretty nasty consequences. Brown-out conditions can cause memory to get written or... |
$5.95 |
|
Retired - ADH8066 BreakoutDescription: This is a simple breakout board for our ADH8066 miniature, quad-band GSM module. Standard 0.1" spaced headers allow easy access to a... |
$19.95 |
|
Retired - Beginner Parts KitRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: This is the new revision of the... |
$24.95 |
|
Retired - Breadboard Power Supply Stick 5V/3.3VRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: This is a very simple board that... |
$14.95 |
|
Retired - Breakout Board for USB microBDescription: This simple board breaks out a micro-B USB connector's VCC, GND, D- and D+ pins to a 0.1" pitch header. If you want to add the... |
$2.00 |
|
Retired - Breakout Board for VS1103 MIDI DecoderDescription: The VS1103b is a single-chip MIDI/ADPCM/WAV audio decoder and ADPCM encoder that can handle up to three simultaneous audio streams. It... |
$19.95 |
|
Retired - CC3000 WiFi ShieldDescription: This is a shield for the CC3000 WiFi Module. The CC3000 from TI (Texas Instruments) is a self-contained wireless network processor that... |
$39.95 |
|
Retired - Color Light Sensor Evaluation BoardDescription: The ADJD-S311-CR999 is a great little color light sensor. In fact, it's so little that it can be pretty difficult to play with, so we... |
$14.95 |
|
Retired - Disco - Digital MultimeterDescription: This is for all those starving students that need to buy their first good, low-cost multimeter. This meter has really impressive overall... |
$14.95 Max: 1 |
|
Retired - EasyDriver Stepper Motor DriverRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: The EasyDriver is a simple to... |
$14.95 |
|
Retired - Evaluation Board for Si4703 FM TunerDescription: This is an evaluation board for the Silicon Laboratories Si4703 FM tuner chip. Beyond being a simple FM radio, the Si4703 is also... |
$19.95 |
|
Retired - Humidity and Temperature Sensor - SHT15 BreakoutHumidity and Temperature Sensor - SHT15 Breakout Description: This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The... |
$41.95 |
|
Retired - i-RacerDescription: This is one cool little car. This simple, two-wheel drive chassis has a rack-and-pinion style steering mechanism so it turns like a car,... |
$29.95 |
|
Retired - LED RingCoder Breakout - RGBDescription: This breakout board gives you a pretty slick interface for rotary input. Since rotary encoders turn continuously it can be difficult to... |
$6.95 |
|
Retired - Lilypad Battery ConnectDescription: The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your LilyPad... |
$2.95 |
|
Retired - Lilypad Coin Cell Battery HolderDescription: If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick.... |
$3.95 |
|
Retired - LilyPad LED White (5pcs)Retired: This product has been replaced by a new version. This page is for your reference only. Description: A simple, very bright, 250mcd, white LED... |
$3.95 |
|
Retired - LilyPad LiPowerDescription: A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about... |
$14.95 |
|
Retired - LilyPad Power SupplyRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: A small, but mighty power supply.... |
$14.95 |
|
Retired - LilyPad Power SupplyDescription: A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the... |
$14.95 |
|
Retired - LilyPad Simple PowerRetired: This product has been replaced by a newer version. This page is for your reference only. Description: The LilyPad Simple Power is a board... |
$4.95 |
|
Retired - LiPoly Charger - Single Cell 3.7-7V InputDescription: This is a Polymer Lithium Ion battery charger based on the MAX1555 IC. This charger uses either USB bus power (MAX1555 internally limits... |
$16.95 |
|
Retired - Long Nosed PliersDescription: These pliers are perfect in situations where your standard needle nose pliers are a bit too wide and a pair of tweezers just isn't... |
$3.95 |
|
Retired - Makey Makey - Deluxe KitDescription: You may be the greatest living banana-pianist, but how will you ever know if you don't make yourself a banana piano? Good news, that... |
$59.95 |
|
Retired - MiniMoto - DRV8830 BreakoutDescription: The MiniMoto is a great little breakout for the DRV8830 I2C DC motor driver. The MiniMoto is great for driving most small robotics. With... |
$9.95 |
|
Retired - MPR121 Capacitive Touch Sensor Breakout BoardDescription: This is a breakout board for Freescale's MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The... |
$9.95 |
|
Retired - Muscle Sensor v3Retired: This product has been replaced by a new version. This page is for your reference only. Description: Granted, using our muscles to control... |
$26.95 |
|
Retired - NCP1402-5V Step-Up BreakoutDescription: The NCP1402 is a 5V DC-DC converter. This breakout board will accept voltage inputs between 1 and 4 Volts and output a constant, low... |
$5.95 |
|
Retired - PicoBoardRetired: This product has been replaced by a new version. This page is for your reference only. Description: The PicoBoard allows you to create... |
$44.95 |
|
Retired - Polymer Lithium Ion Batteries - 20mAhRetired: This product is no longer available. This page is for your reference only. Description: This is an extremely tiny and light weight battery... |
$5.95 |
|
Retired - Power Cell - LiPo Charger/BoosterRetired: Please note, this item has been discontinued, and replaced with a new version COM-14411 This page is for your reference only. Description:... |
$19.95 |
|
Retired - Pro Micro - 5V/16MHzDescription: The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB... |
$24.95 |
|
Retired - Resistor Kit - 1/4WRetired: This product is no longer available. This page is for your reference only. Please note, this item has been discontinued, and replaced with... |
$10.95 |
|
Retired - RFID Reader BreakoutRetired: This product has been replaced by a newer version. This page is for your reference only. Description: This is a simple breakout board for... |
$0.95 |
|
Retired - Rotary DIP Switch - 16 PositionDescription: Rotary switches are nice for being able to select up to 16 different states in a small package. With only 6 pins (2 of which are... |
$2.95 |
|
Retired - Soldering Station Variable Temperature 50W - AnalogRetired: This product has been replaced by a newer version. This page is for your reference only. Description: This is a great step up from the basic... |
$49.95 |
|
Retired - SparkFun Bluetooth Modem - BlueSMiRF HIDDescription: The BlueSMiRF HID is essentially the same board as the BlueSMiRF Silver but the populated RN-42 comes loaded with the HID firmware. HID,... |
$24.95 |
|
Retired - SparkFun Inventor's Kit - V3.2Description: The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming... |
$99.95 |
|
Retired - SparkFun Inventor's Kit - v4.0Description: The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming... |
$99.95 |
|
Retired - SparkFun OpenLogNOTE: This product has been replaced by an updated version. Description: The SparkFun OpenLog is an open source data logger. Simple to use, simple... |
$24.95 |
|
Retired - SparkFun Simon - Surface Mount Stenciling KitDescription: The Sparkfun Surface Mount Stenciling Simon Says kit is a great challenge to anyone with intermediate skills at soldering resulting in a... |
$9.95 |
|
Retired - SparkFun UV Sensor Breakout - ML8511Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal... |
$12.95 |
|
Retired - SPI ShortcutDescription: The SPI Shortcut allows you to control SPI pins over USB, allowing for a virtual "SPI Terminal." Using basic serial commands you can... |
$24.95 |
|
Retired - Super Capacitor - 0.2F/3.3VDescription: This tiny surface mount capacitor has a total capacity of 0.2F, which is a lot for something so small. This small cap can be charged up... |
$1.95 |
|
Retired - Tilt-a-Whirl Breakout - RPI-1031Description: The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This... |
$5.95 |