Please note: These products have been retired and are no longer available from their respective manufactures.
Do not order these parts on back-order, if there is no stock we can not get more.
Please note: These products have been retired and are no longer available from their respective manufactures.
Do not order these parts on back-order, if there is no stock we can not get more.
Product Image | Item Name- | Price |
---|---|---|
Retired - LilyPad LiPowerDescription: A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about... |
$14.95 |
|
Retired - LilyPad LED White (5pcs)Retired: This product has been replaced by a new version. This page is for your reference only. Description: A simple, very bright, 250mcd, white LED... |
$3.95 |
|
Retired - LilyPad LED Red (5 pieces)Retired: This product has been replaced by a newer version.. This page is for your reference only. Description: Here is a simple 5 pack of red LEDs... |
$4.95 |
|
Retired - LilyPad LED Blue (5 pieces)Retired: This product has been replaced by a new version. This page is for your reference only. Description: Here is a simple 5 pack of blue LEDs for... |
$4.95 |
|
Retired - Lilypad Coin Cell Battery HolderDescription: If you're looking for a simple way to add a battery to your LilyPad project, the LilyPad Coin Cell Battery Holder might do the trick.... |
$3.95 |
|
Retired - LilyPad Bright White LEDDescription: A simple, very bright, 250mcd, white LED LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah... |
$1.95 |
|
Retired - Lilypad Battery ConnectDescription: The LilyPad Battery Connect simply gives you a connection point for a battery or anything else you might want to plug in to your LilyPad... |
$2.95 |
|
Retired - LilyPad Arduino USB - ATmega32U4 BoardRetired: This product has been replaced by the a newer version.. This page is for your reference only. Description: The LilyPad Simple just got a... |
$24.95 |
|
Retired - LilyPad Arduino Simple BoardDescription: This is the LilyPad Arduino Simple Board. It's controlled by an ATmega328 with the Arduino bootloader. It has fewer pins than the... |
$19.95 |
|
Retired - LilyPad AccelerometerDescription: This is a three axis accelerometer for the LilyPad system. Based on the ADXL330 accelerometer from Analog Devices, the LilyPad... |
$24.95 |
|
Retired - LightBlue BeanZero wires, infinite uses: Bean connects your physical things to the digital world. The LightBlue Bean is one of the most expansive Bluetooth Low... |
$35.00 |
|
Retired - LED RingCoder Breakout - RGBDescription: This breakout board gives you a pretty slick interface for rotary input. Since rotary encoders turn continuously it can be difficult to... |
$6.95 |
|
Retired - Key Switch - MediumDescription: Have you ever wanted to start your widget the same way you start your car? These key switches are the key to making that happen. This... |
$1.95 |
|
Retired - JST SH Jumper 3 Wire Assembly - 8"Description: This is a simple three wire cable. Great for jumping from board to board or just about anything else. These cables mate with the... |
$0.50 |
|
Retired - Ice Tube Clock kit - v1.1Discontinued This is Adafruit's first clock kit design, made with a retro Russian display tube! Cool glowing blue tube with 8 digits, PM dot and... |
$85.00 |
|
Retired - I2C / SPI LCD Interface - PCB ONLYRetired: This product has been replaced by the I2C Interface v3. This page is for your reference only. This is just the I2C SPI LCD Interface PCB. |
$5.95 |
|
Retired - I2C / SPI LCD Interface - I2C Version - ASSEMBLEDRetired: This version has been replaced by the I2C Interface v3. This page is for your reference only. Convert your 14 or 16 pin parallel interface... |
$19.95 |
|
Retired - I2C / SPI Interface - I2C Version - KITRetired: This version has been replaced by the I2C Interface v3 kit. This page is for your reference only. This kit lets you convert your 14 or 16... |
$12.95 |
|
Retired - i-RacerDescription: This is one cool little car. This simple, two-wheel drive chassis has a rack-and-pinion style steering mechanism so it turns like a car,... |
$29.95 |
|
Retired - Humidity and Temperature Sensor - SHT15 BreakoutHumidity and Temperature Sensor - SHT15 Breakout Description: This is a simple breakout board for the SHT15 humidity sensor from Sensirion. The... |
$41.95 |
|
Retired - Hot-air Rework Station with Soldering Iron HR906Retired: This product has been replaced by the Hot-air Rework Station - 303D. This page is for your reference only. Description: Multi-function... |
$194.95 |
|
Retired - Hobby MotorDescription: Here is a basic hobby motor. It works well for basic things like making a fan or spinning something very fast without much resistance.... |
$2.00 |
|
Retired - Headerless ShiftBrite V2.0Update alert! The new Headerless ShiftBrite V2.0 is a redesigned and improved verson of the original ShiftBrite. Here are the major differences: New... |
$4.99 |
|
Retired - Headerless ShiftBriteRetired: This version has been replaced by the Headerless ShiftBrite v2. This page is for your reference only. In response to customer requests, we... |
$4.99 |
|
Retired - Handset Connector 4-pin RJ-9Description: This is a 4-pin connector commonly found on phone handsets. Great for simple TX/RX/PWR/GND connections. Sometime referred to as RJ9 or... |
$0.10 |
|
Retired - Hakko FX888D Soldering StationDescription: For over 50 years, Hakko has been producing superior quality soldering and desoldering tools. They're dependable, a good value and they... |
$99.95 |
|
Retired - Hakko FX888 Soldering StationRetired: This product has been replaced by a newer digital version. This page is for your reference only. Description: For over 50 years, Hakko has... |
$99.95 |
|
Retired - GA1A12S202 Log-scale Analog Light SensorDescription: Upgrade a project that uses a photocell with the GA1A12S202 analog light sensor. Like a CdS photo-cell, the sensor does not require a... |
$3.99 |
|
Retired - FTDI Basic Breakout - 3.3VRetired: This version has been updated to a newer version FTDI Basic Breakout - 3.3V kit. This page is for your reference only. Description: This is... |
$14.95 |
|
Retired - Flush CuttersDescription: These are high quality flush cutters giving you a way to cut leads very cleanly and close to the solder joint. Diagonal cutters are... |
$3.95 |
|
Retired - Flexible Speaker and Amplifier - 7x12cmDescription: This is a very thin flexible speaker with included amplifier, perfect for wearable applications where you need a little sound to spice... |
$27.99 |
|
Retired - Flexible Coolant Pipe - 1ft (1/2")Retired: This product has been replaced by the a newer version. This page is for your reference only. Description: These plastic Flexible Coolant... |
$1.95 |
|
Retired - Fiber Optic Fabric - White (40x75 cm)Retired: Sorry, but at the moment there is no replacement for this product. Description: This fiber optic fabric is a cool and unique way to add some... |
$39.95 |
|
Retired - Fiber Optic Fabric - Black (40x75 cm)Description: This black fiber optic fabric is a cool and unique way to add some shine to your e-textiles project. There are optical fibers actually... |
$44.95 |
|
Retired - Evaluation Board for Si4703 FM TunerDescription: This is an evaluation board for the Silicon Laboratories Si4703 FM tuner chip. Beyond being a simple FM radio, the Si4703 is also... |
$19.95 |
|
Retired - ePIRDescription: Zilog's ePIR is a fully functional motion-detecting single-board computer (SBC). Combined on this board are a Z8 Encore! XP MCU, and a... |
$11.95 |
|
Retired - EeonTex Pressure Sensing FabricDescription: This EeonTex fabric is a conductive, nonwoven microfiber with piezo-resistive functionality for use in dynamic sensors to map and... |
$24.95 |
|
Retired - EeonTex Conductive Stretchable FabricDescription: This EeonTex fabric is a bidirectionally stretchy nylon/spandex, elastic fabric coated with a long-lasting conductive formulation. This... |
$24.95 |
|
Retired - EasyDriver v3 Stepper Motor DriverRetired: This product has been replaced by the EasyDriver Stepper Motor Driver. This page is for your reference only. Description: EasyDriver v3 is a... |
$14.95 |
|
Retired - EasyDriver Stepper Motor Driver v4Retired: This product has been replaced by the EasyDriver Stepper Motor Driver. This page is for your reference only. Description: The EasyDriver is... |
$14.95 |
|
Retired - EasyDriver Stepper Motor DriverRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: The EasyDriver is a simple to... |
$14.95 |
|
Retired - Drawdio kitRetired: This product has been replaced by the Drawdio v1.1. This page is for your reference only. Drawdio is an electronic pencil that lets you make... |
$19.95 |
|
Retired - Disco - Digital MultimeterDescription: This is for all those starving students that need to buy their first good, low-cost multimeter. This meter has really impressive overall... |
$14.95 Max: 1 |
|
Retired - Digg button kit v1.0This kit contains the PCB and all the electronic parts for a Digg Button, including 2 batteries. Tools are not included. This project is designed for... |
$15.00 |
|
Retired - DC Boarduino (Arduino Clone) Kit (w/ATmega328)If you've ever struggled to use a solderless breadboard with an Arduino, you understand how frustrating it can be! This clone acts just like an... |
$17.50 |
|
Retired - Data logging shield for ArduinoHere's a handy Arduino shield: This is a well-designed data logging shield. Not only is it easy to assemble and customize, it also comes with great... |
$19.50 |
|
Retired - Danger ShieldDescription: The Danger Shield mounts on top of your Arduino and equips it with a variety of fun and useful inputs and outputs. The Danger Shield has... |
$29.95 |
|
Retired - Conway's Game of Life Kit v1.3 - Older VersionPlease note: This kit has been updated slightly to a newer version with a blue PCB. In 1970, John Conway came up with a 1-player game called Game of... |
$12.50 |
|
Retired - Conductive Thread - 234/34 4plyRetired: This product is no longer available. We now have a better version made of stainless steel. Conductive Thread - 60g (Stainless Steel)... |
$34.95 |
|
Retired - Conductive Thread - 117/17 2plyRetired: This product is no longer available. We now have a better version made of stainless steel. Conductive Thread - 60g (Stainless Steel)... |
$32.95 |