Sparkfun
Product Image | Item Name | Price- |
---|---|---|
SparkFun Load Cell Amplifier - HX711Description: The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.... |
$10.95 |
|
SparkFun MEMS Microphone Breakout - INMP401 (ADMP401)Description: This tiny breakout board features the ADMP401 MEMs microphone. One of the key advantages to this breakout and microphone is the bottom... |
$10.95 |
|
SparkFun WeevilEye - Beginner Soldering KitDescription Have you ever seen a Weevil? It’s a pretty under-appreciated beetle, so Sparkfun thought it deserved a kit. Okay, so we just kind of... |
$10.95 |
|
Retired - Arduino MegaShield KitDescription: The Arduino Mega now has its very own prototyping shield! The MegaShield mates with the Arduino Mega board and gives the user a... |
$17.95 $10.77 Save: 40% off |
|
Build Upons LED - PTH (10 Pack)Description: There are LEDs and then there are Build Upons LEDs. Each Build Upons PTH LED in this 10 pack are brick shaped in the same form of your... |
$9.95 |
|
Button Pad 4x4 - Breakout PCBDescription: This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered... |
$9.95 |
|
Button Pad 4x4 - LED CompatibleDescription: This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole... |
$9.95 |
|
ISP Pogo AdapterDescription: Pogo pins make life so much easier when you are trying to program without having to solder a single thing, and when you attach them to... |
$9.95 |
|
Magnet Wire KitDescription: Magnet wire is super useful stuff, and when you need it there's nothing else that will work. Whether you're winding a transformer or... |
$9.95 |
|
Qwiic Arcade - RedDescription: According to some Sparkfun engineers, if you hold this Qwiic Arcade switch up next to your ear, you can hear the sounds of Pac-Man... |
$9.95 |
|
Replaced - SparkFun Load Cell Amplifier - HX711Description: The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.... |
$9.95 |
|
Retired - MiniMoto - DRV8830 BreakoutDescription: The MiniMoto is a great little breakout for the DRV8830 I2C DC motor driver. The MiniMoto is great for driving most small robotics. With... |
$9.95 |
|
Retired - MPR121 Capacitive Touch Sensor Breakout BoardDescription: This is a breakout board for Freescale's MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The... |
$9.95 |
|
Retired - SparkFun Simon - Surface Mount Stenciling KitDescription: The Sparkfun Surface Mount Stenciling Simon Says kit is a great challenge to anyone with intermediate skills at soldering resulting in a... |
$9.95 |
|
Solder-able Breadboard - LargeDescription: This is the Large Solder-able Breadboard. A bare PCB that is the exact size as our full-size breadboard with the same connections to... |
$9.95 |
|
Soldering Iron - 30W US 3-Prong 110VDescription: This is a very simple fixed temp, quick heating, 30W 110/120 VAC soldering iron. We really enjoy using the more expensive irons, but if... |
$9.95 |
|
SparkFun Beefcake Relay Control Kit (Ver. 2.0)Description: Your 5V system can wield great power with this big, beefy relay board. How does 10A on the NC contacts and 20A on the NO contacts at... |
$9.95 |
|
SparkFun Current Sensor Breakout - ACS723Description: The SparkFun Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for moderate AC and DC current sensing... |
$9.95 |
|
SparkFun Qwiic Cable KitDescription: The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, included in... |
$9.95 |
|
VCNL4000 Infrared Emitter BreakoutDescription: In physical computing it's sometimes nice to know how physically close you are to an object. In other words, you may need to know your... |
$9.95 |
|
XBee Explorer RegulatedDescription: The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and... |
$9.95 |
|
Touch ShieldDescription: The MPR121 IC is a great way to build simple capacitive touch interfaces, and now it's even easier to incorporate into your Arduino... |
$14.95 $8.97 Save: 40% off |
|
Heat Shrink RetailDescription: We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections, protect devices, and electrically... |
$8.95 |
|
LiPo Charger Basic - Mini-USBDescription: If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer... |
$8.95 |
|
Motor Driver 1A Dual TB6612FNGDescription: The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2)... |
$8.95 |
|
Polymer Lithium Ion Batteries - 850mAhDescription: These are very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry. This is the highest energy density... |
$8.95 |
|
Resistor Kit - 1/4W (500 total)Description: Resistors are a good thing, in fact, they're actually crucial in a lot of circuit designs. The only problem seems to be that resistors... |
$8.95 |
|
Retiired - MonoAmp - Sound Amplifier RetailDescription: This tiny audio amplifier is based on the Texas Instruments TPA2005D1. Its efficient class-D operation means low heat and long battery... |
$8.95 |
|
SparkFun Discrete Semiconductor KitDescription: If you do anything with electronics, you’re probably already using transistors, but you’re probably using them in large, prepackaged... |
$10.95 $8.95 Save: 18% off |
|
SparkFun Qwiic Shield for ArduinoDescription: The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your... |
$8.95 |
|
SparkFun Snappable ProtoboardDescription: Sometimes it’s nice to have a protoboard that’s super long and skinny, super small, or just a bunch of holes. The SparkFun Snappable... |
$8.95 |
|
Joystick Shield kitDescription: The Joystick Shield kit contains all the parts you need to enable your Arduino with a joystick! The shield sits on top of your Arduino... |
$9.50 $8.50 Save: 11% off |
|
LilyPad Vibe BoardDescription: Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but... |
$8.50 |
|
SparkFun Capacitive Touch Breakout - AT42QT1010Description: If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun... |
$8.50 |
|
SparkFun Mono Audio Amp Breakout TPA2005D1Description: This tiny audio amplifier is based on the Texas Instruments TPA2005D1. Its efficient class-D operation means low heat and long battery... |
$8.50 |
|
SparkFun Barometric Pressure Sensor Breakout - BMP180Description: This is a breakout board for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range... |
$9.95 $8.46 Save: 15% off |
|
Breakout Board for Electret MicrophoneDescription: Ready to add audio to your next project? This small breakout board couples a small electret microphone with a 100x opamp to amplify the... |
$7.95 |
|
Day of the Geek - Soldering Badge Kit (Black)Description: The Day of the Dead only comes around once a year but what if you could celebrate it any day you want? With this black version of the... |
$7.95 |
|
Day of the Geek - Soldering Badge Kit (White)Description: The Day of the Dead only comes around once a year but what if you could celebrate it any day you want? With this black version of the... |
$7.95 |
|
Flex Sensor 2.2"Description: A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra... |
$7.95 |
|
LED - 3W Aluminum PCB (5 Pack, Blue)Description: So much power and light from such a small package. This 5 pack of blue 3 Watt aluminum backed PCBs is sure to shed a lot of light on any... |
$7.95 |
|
LED - 3W Aluminum PCB (5 Pack, Red)Description: So much power and light from such a small package. This 5 pack of red 3 Watt aluminum backed PCBs is sure to shed a lot of light on any... |
$7.95 |
|
LED - 3W Aluminum PCB (5 Pack, Warm White)Description: So much power and light from such a small package. This 5 pack of “Warm” white 3 Watt aluminum backed PCBs is sure to shed a lot of... |
$7.95 |
|
LilyPad Light SensorDescription: This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V.... |
$7.95 |
|
LilyPad Tri-Color LEDDescription: Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can... |
$7.95 |
|
Replaced - Beefcake Relay Control KitRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: Your 5 volt system can wield... |
$7.95 |
|
SparkFun Big Red Box Proto BoardDescription: The SparkFun Big Red Box Proto Board is a large, custom made PCB that has been specifically designed to be used with and installed into... |
$7.95 |
|
SparkFun Capacitor KitDescription: This is a kit that provides you with a basic assortment of capacitors to start or continue your electronics tinkering. No more looking... |
$7.95 |
|
SparkFun RGB Light Sensor - ISL29125Description: If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those... |
$7.95 |
|
SparkFun Soil Moisture Sensor (with Screw Terminals)Description: The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture... |
$7.95 |