Breakouts
Product Image | Item Name- | Price |
---|---|---|
Teensy 3.1 + headerDESCRIPTION : Teensy 3.1 is a small, breadboard-friendly development board designed by Paul Stoffregen and PJRC. Teensy 3.1 brings a low-cost 32 bit... |
$23.95 |
|
Touch screen (Nintendo DSL digitizer)Want to poke at your projects? This resistive touch screen can be used with a stylus or fingertip and is easy to use with a microcontroller. You can... |
$8.00 $5.95 Save: 26% off |
|
Touch screen breakout board (0.5mm FPC)If you've got a resistive touch screen that you'd like to use, you'll need this breakout! It has a fine pitch (0.5mm) connector soldered onto it and... |
$4.00 |
|
USBtinyISP AVR Programmer Kit - v2.0USBtinyISP is a simple open-source USB AVR programmer and SPI interface. It is low cost, easy to make, works great with avrdude, has both 6 and 10... |
$22.00 |
|
White LED Backlight Module - Small 12mm x 40mmThese pretty strips of light are plastic diffused backlights, often seen in LCD displays. Normally they're tucked behind the LCD and shine white... |
$2.00 |
|
XBee Adapter kitThis adapter board is designed to make adding wireless point-to-point or mesh networking easy. Specifcations: Onboard 3.3V regulator to cleanly power... |
$10.00 |
|
8-channel Bi-directional Logic Level Converter - TXB0108Description Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many makers... |
$8.00 |
|
Adafruit DS1307 Real Time Clock Assembled Breakout BoardDESCRIPTION This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is... |
$7.50 |
|
Altoids mints sized tinDescription This is a great metal housing for your prototype. See below for dimensions. Mint tin dimensions: Top lid outer (not lip): 2.36" (59.9mm)... |
$2.50 |