Retired - Breadboard Power Supply Stick 5V/3.3V

$14.95

  • Model: PRT-10804
  • Shipping Weight: 0.035Kg
  • 0 Units in Stock
  • Manufactured by: Sparkfun

Additional Images




Retired: This product has been replaced by the a newer version. This page is for your reference only.

Description: This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for simple insertion into a breadboard.

Input power can be supplied to either the DC barrel jack or the two pin header labeled + and -. Output power is supplied to the pins labeled GND and VCC. Board has both an On/Off switch and a voltage select switch (3.3V/5V). 

The two pairs of GND and VCC holes are spaced such that when connected to a basic breadboard both power busses will be powered.

Check out Sparkfun's Unregulated Power Supply Tutorial!

Note: Headers are not supplied. You will need to supply your own headers to connect this board to a breadboard.  Check below for some breakaway header strips.

Dimensions: 2.15x0.65"

Features:

  • 6-12V input voltage via barrel jack or 2-pin header
  • 3.3V or 5V regulated output voltage
  • ON/OFF switch
  • Output voltage select switch
  • Power status LED
  • PTC fuse protected power
  • 5.5x2.1mm center positive barrel jack

Documents:


Add to Cart:


wabusiness template