Adafruit
Product Image | Item Name | Price- |
---|---|---|
Rotating Door Lock DC MotorDescription: This Rotating Door Lock Motor is a DC Gearbox motor with a little pocket that is intended for a door lock mechanism. The motor only... |
$3.95 |
|
Submersible 3V DC Water Pump with 1 Meter Wire - Horizontal TypeDescription: Make fountains or plant-watering projects with this submersible water pump. It's great for beginner projects and super easy to use! The... |
$3.95 |
|
100uF 16V Electrolytic Capacitors - Pack of 10Description: This is a 10 pack of 100uF 16v capacitors so they can be used with any DC voltage up to 16V. They have a tolerance of ±20% and... |
$2.95 |
|
20mm Coin Cell Breakout Board (CR2032)Description: Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on and 0.1" pitch breakout pins for... |
$2.95 |
|
Adafruit MiniBoost 5V @ 100mA Charge Pump - AP3602ADescription: This adorable little board will come in very handy whenever you need a small amount of 5V power. It's the size of a linear regulator,... |
$2.95 |
|
Adafruit Qwiic / Stemma QT 5 Port HubDescription: Qwiic, or STEMMA QT, is a very efficient way to quickly prototype an idea, but a lot of Qwiic/Stemma QT driver boards only have one... |
$2.95 |
|
Breadboard-Friendly PCB Mount Mini Speaker - 8 Ohm 0.2WDescription: Listen up! This 1.1" (~30mm) diameter speaker is the perfect addition to any breadboard-based audio project where you need 8 Ohm... |
$2.95 |
|
Mini Metal Speaker w/ Wires - 8 ohm 0.5WDescription: Listen up! This tiny 1" diameter speaker cone is the perfect addition to any small audio project where you need an 8 ? impedance and... |
$2.95 |
|
Mini Oval Speaker with Short Wires - 8 Ohm 1 WattDescription: This wee speaker is a great addition to any audio project where you need 8 ohm impedance and 1W or less of power. Adafruit... |
$2.95 |
|
Adafruit ALS-PT19 Analog Light Sensor BreakoutDESCRIPTION Add a teeny analog light sensor, the ALS PT19 analog light sensor is a great way to upgrade a project that uses a photocell and needs... |
$2.50 |
|
Altoids Gum sized tinDescription: Ever since Altoids discontinued the Gum version, its been hard to get tins. So Adafruit went and got a whole mess of them custom made!... |
$2.50 |
|
74AHCT125 - Quad Level-Shifter (3V to 5V) - 74AHCT125Description: Level shifting chips let you connect 3V and 5V devices together safely. This chip is similar to others in the shop (such as the... |
$2.25 |
|
Flora Sewable 3-Pin JST Wiring AdapterDescription: This board is a sewable adapter with a 3-pin JST wiring adapter. It's a perfect way to add a simple link between things like the Flora... |
$2.25 |
|
MCP23008 - i2c 8 input/output port expanderDescription: Add another 8 pins to your microcontroller using an MCP23008 port expander. The MCP23008 uses two i2c pins (these can be shared with... |
$2.25 |
|
SWD (2x5 1.27mm) Cable Breakout BoardDESCRIPTION This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for... |
$1.95 |