Sparkfun
Product Image | Item Name | Price+ |
---|---|---|
Ribbon Crimp Connector - 6-pin (2x3, Female)Description: These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections... |
$0.35 |
|
Mini Push Button Switch - TallDescription: Miniature Single Pull Single Throw switches. These are high quality Omron type B3F momentary on switches. This switch has a very large... |
$0.50 |
|
Ribbon Crimp Connector - 10-pin (2x5, Female)Description: These 2x5 crimp connectors can be snapped onto 10-wire ribbon cable to make your own cable assemblies and keep your connections... |
$0.50 |
|
SPDT Slide SwitchDescription: This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by... |
$0.75 |
|
Gas Sensor Breakout BoardDescription: Simple breakout board for the MQ-3 Gas Sensor. All you need is VCC at 5V, GND, and a resistor to an ADC, that is it. Note: This is the... |
$0.95 |
|
Key Switch - SmallDescription: Have you ever wanted to start your widget the same way you start your car? These small switches are the key to making that happen. This... |
$0.95 |
|
Mini Push Button Switch - SMDDescription: Miniature surface mount momentary button. These are great, low-profile momentary switches. Perfect as a tactile reset switch. Rated up... |
$0.95 |
|
Retired - Push Button 33mm - BlueDescription: This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$0.95 |
|
Retired - RFID Reader BreakoutRetired: This product has been replaced by a newer version. This page is for your reference only. Description: This is a simple breakout board for... |
$0.95 |
|
Slide Potentiometer KnobDescription: This is the knob that connects to the linear slide potentiometer. Knob has a nice friction fit onto slide. Documents: Datasheet |
$0.95 |
|
SOT23 to DIP AdapterDescription: 6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs,... |
$0.95 |
|
Thin SpeakerDescription: If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.25W, 8Ohm speaker... |
$0.95 |
|
Motor MountDescription: Mini Metal Gearmotors are great for small robots but they can be hard to mount. Simply bolt the mount to the faceplate of the motor and... |
$1.00 |
|
Coin Cell Holder - Sewable SMDDescription: This is a coin cell holder for the common CR2032 type battery. The holder has a neat pop-in, pop-out feature that makes changing the... |
$1.25 |
|
JST Jumper 3 Wire AssemblyDescription: This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on... |
$1.50 |
|
JST Jumper 4 Wire AssemblyDescription: This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on... |
$1.50 |
|
Jumper Wire - JST 4-PinDescription: This is a great cable if you need to work with the SMD JST connectors. Gives you four wires to work with. We use this cable for the USB... |
$1.50 |
|
Qwiic Cable - 50mmDescription: This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be... |
$1.50 |
|
Retired - Magnetic Snap 10mmRetired: This product is no longer available. This page is for your reference only. Description: A snap is fun, but a magnetic snap adds a whole new... |
$1.50 |
|
SPDT Mini Power SwitchDescription: Simple SPDT Switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general... |
$1.50 |
|
Multicolor Buttons - 4-packDescription: This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects! Unlike previous iterations of multicolor... |
$1.60 |
|
SparkFun Photo Interrupter Breakout Board - GP1A57HRJ00FDescription A simple breakout PCB for the GP1A57HR photo interrupter (also known as a photogate, photodiode, or phototransistor). This PCB has three... |
$1.75 |
|
SparkFun TRS Jack Breakout - 1/4" StereoDescription: The TRS (tip ring sleeve) jack breakout is a simple board that allows a ¼" stereo audio jack to be soldered on to gain easy access to... |
$2.50 $1.88 Save: 25% off |
|
4-Digit 7-Segment Display - Kelly GreenDescription: This is a basic, 4-digit 7-segment display - kelly green in color. It has a common anode. The display features one decimal point per... |
$1.95 |
|
4-Digit 7-Segment Display - RedDescription: This is a basic, 4-digit 7-segment display - red in color. It has a common anode. The display features one decimal point per digit, and... |
$1.95 |
|
4-Digit 7-Segment Display - YellowDescription: This is a basic, 4-digit 7-segment display - yellow in color. It has a common anode. The display features one decimal point per digit,... |
$1.95 |
|
LilyPad Protoboard SmallDescription: This is a small board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together... |
$1.95 |
|
Omron Snap Action SwitchDescription: Very sensitive lever switches. Great for detecting objects such as other sumo bots, walls, balls, etc. Simple to wire and attach to... |
$1.95 |
|
Push Button 33mm - YellowDescription: This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$1.95 |
|
Retired - LilyPad Bright White LEDDescription: A simple, very bright, 250mcd, white LED LilyPad. Light up the night! LilyPad is a wearable e-textile technology developed by Leah... |
$1.95 |
|
Retired - Super Capacitor - 0.2F/3.3VDescription: This tiny surface mount capacitor has a total capacity of 0.2F, which is a lot for something so small. This small cap can be charged up... |
$1.95 |
|
Solder Leaded - 15-gram TubeDescription: This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder... |
$1.95 |
|
SparkFun Load Sensor CombinatorDescription: The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard 4-wire wheatstone configuration . If... |
$1.95 |
|
SparkFun RFID Reader BreakoutDescription: This is a simple breakout board for our RFID readers. The SparkFun RFID Reader Breakout converts the 2mm pins to bread board friendly... |
$1.95 |
|
SparkFun Rotary Switch BreakoutDescription: This is the SparkFun Rotary Switch Breakout, a very simple board designed to easily provide you access to each pin on our 10-position... |
$1.95 |
|
Teensy Header KitDescription: These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard... |
$1.95 |
|
Triple Output LED RGB - DiffusedDescription: Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin.... |
$1.95 |
|
Retired - Breakout Board for USB microBDescription: This simple board breaks out a micro-B USB connector's VCC, GND, D- and D+ pins to a 0.1" pitch header. If you want to add the... |
$2.00 |
|
Cherry MX Switch BreakoutDescription: Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to... |
$2.25 |
|
LilyPad Button BoardDescription:This board was designed to give the user a very discrete button without any sharp edges. Button closes when you push it and opens when... |
$2.25 |
|
SparkFun Rotary Switch Potentiometer BreakoutDescription: The SparkFun Rotary Switch Potentiometer Breakout is a small board the allows you to add resistors to a 10-position rotary switch,... |
$2.25 |
|
Solder Wick #2 5ft. - GenericDescription: Solder wick is a composed of copper threads braided together. Flux is normally added to help the solder flow from where it is not... |
$2.49 |
|
4-Digit 7-Segment Display - BlueDescription: This is a basic, 4-digit 7-segment display - blue in color. It has a common anode. The display features one decimal point per digit, and... |
$2.50 |
|
Hook-up Stranded Wire - BlackDescription: Standard 22 AWG stranded black wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools... |
$2.50 |
|
Hook-up Stranded Wire - RedDescription: Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of... |
$2.50 |
|
Hook-up Stranded Wire - WhiteDescription: Standard 22 AWG stranded white wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools... |
$2.50 |
|
Hook-up Wire - BrownDescription: Standard 22 AWG solid brown hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small... |
$2.50 |
|
Hook-up Wire - GreyDescription: Standard 22 AWG solid Grey hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small... |
$2.50 |
|
Qwiic Cable - 100mmDescription: This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be... |
$2.50 |
|
SparkFun Photon ProtoShieldDescription: You can’t have any development board without some sort of prototyping area, the SparkFun Photon ProtoShield takes care of this. This... |
$2.50 |