Sparkfun
Product Image | Item Name+ | Price |
---|---|---|
LilyPad Protoboard LargeDescription: This is a large board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together... |
$6.95 $5.91 Save: 15% off |
|
LilyPad Protoboard SmallDescription: This is a small board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together... |
$1.95 |
|
LilyPad Rainbow LED Panel (5 strips of 7 colors)Description: This is the LilyPad Rainbow LED Panel, a simple seven pack of every LilyPad LED that we have on five strips, each still attached to a... |
$24.95 |
|
LilyPad Reed SwitchDescription: The LilyPad Reed Switch is a simple breakout for a reed switch that will make it easy to use in e-textiles circuits in exactly the same... |
$4.50 |
|
LilyPad Simple PowerDescription: The LilyPad Simple Power is a simple e-textile board with a 500mA charge rate that lets you connect and charge a lipo battery and switch... |
$11.50 |
|
LilyPad SimpleSnap ProtoboardDescription: The LilyPad SimpleSnap Protoboard is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled... |
$6.50 |
|
LilyPad Slide SwitchDescription: This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. LilyPad is a... |
$2.95 |
|
LilyPad Temperature SensorDescription: Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output... |
$5.50 |
|
LilyPad Tri-Color LEDDescription: Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can... |
$7.95 |
|
LilyPad Vibe BoardDescription: Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but... |
$8.50 |
|
LilyPad XBeeDescription: Upgrade The LilyPad XBee is a breakout board for the popular XBee modules that can be sewn into your e-textile projects to provide them... |
$15.95 |
|
LiPo Charger Basic - Mini-USBDescription: If you need to charge LiPo batteries, this simple charger will do just that. It is designed to charge single-cell Li-Ion or Li-Polymer... |
$8.95 |
|
Load Cell - 10kg, Straight Bar with Hook (HX711)Description: This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal.... |
$14.95 |
|
Magnet Wire KitDescription: Magnet wire is super useful stuff, and when you need it there's nothing else that will work. Whether you're winding a transformer or... |
$9.95 |
|
MicroView - OLED Arduino ModuleDescription: The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED... |
$39.95 |
|
MicroView - USB ProgrammerDescription: The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED... |
$14.95 |
|
Mini Push Button Switch - SMDDescription: Miniature surface mount momentary button. These are great, low-profile momentary switches. Perfect as a tactile reset switch. Rated up... |
$0.95 |
|
Mini Push Button Switch - TallDescription: Miniature Single Pull Single Throw switches. These are high quality Omron type B3F momentary on switches. This switch has a very large... |
$0.50 |
|
MOSFET Power ControllerDescription: MOSFETs are awesome. They're like a switch that you flip electronically! This MOSFET Power Controller makes it easy to switch a battery... |
$6.95 |
|
Motor Driver 1A Dual TB6612FNGDescription: The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2)... |
$8.95 |
|
Motor MountDescription: Mini Metal Gearmotors are great for small robots but they can be hard to mount. Simply bolt the mount to the faceplate of the motor and... |
$1.00 |
|
MP3 TriggerDescription: Make some noise with your next project! The MP3 Trigger board is built to make MP3 sound integration easier than ever. The board has 18... |
$53.50 |
|
MPL3115A2 Altitude/Pressure Sensor BreakoutDescription: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm... |
$14.95 |
|
Multicolor Buttons - 4-packDescription: This is a simple 4-pack of momentary, multicolor buttons, great for all sorts of projects! Unlike previous iterations of multicolor... |
$1.60 |
|
Music Instrument ShieldDescription: Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The Musical... |
$29.95 |
|
OBD-II UARTDescription: This board allows you to interface with your car's OBD-II bus. It provides you a serial interface using the ELM327 command set and... |
$49.95 |
|
Omron Snap Action SwitchDescription: Very sensitive lever switches. Great for detecting objects such as other sumo bots, walls, balls, etc. Simple to wire and attach to... |
$1.95 |
|
Opto-isolator BreakoutDescription: This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a... |
$5.50 |
|
Pi WedgeDescription: This is the Pi Wedge, a small board that connects to the Raspberry Pi’s 26-pin GPIO connector, and breaks the pins out to... |
$6.95 |
|
Piezo Vibration Sensor - LargeDescription: This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is... |
$4.95 |
|
Piezo Vibration Sensor - Large with MassDescription: This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is... |
$5.95 |
|
Polymer Lithium Ion Batteries - 110mAhDescription: This is a very small, extremely light weight batty based on the new Polymer Lithium Ion chemistry. This is the highest energy density... |
$6.95 |
|
Polymer Lithium Ion Batteries - 2000mAhDescription: These are very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry. This is the highest energy density... |
$16.95 |
|
Polymer Lithium Ion Batteries - 850mAhDescription: These are very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry. This is the highest energy density... |
$8.95 |
|
Polymer Lithium Ion Battery - 40mAhDescription: This is an extremely tiny and light weight battery based on the new Polymer Lithium Ion chemistry. This is the highest energy density... |
$3.95 |
|
Pro Micro - 3.3V/8MHzDescription: The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB... |
$24.95 |
|
Pro Micro - 5V/16MHzDescription: The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB... |
$19.95 |
|
Proto Pedal EnclosureDescription: The name of this part pretty much says it all! This is the Proto Pedal Enclosure, a custom-machined aluminum case designed specifically... |
$21.95 |
|
ProtoSnap - LilyPad Development BoardDescription: The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which... |
$59.95 $41.97 Save: 30% off |
|
ProtoSnap - Pro MiniDescription: The ProtoSnap is an Arduino-compatible development platform aimed at teaching the basics of Arduino programming as efficiently as... |
$44.95 Sale: $22.48 Save: 50% off |
|
Push Button 33mm - YellowDescription: This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$1.95 |
|
QRE1113 Line Sensor Breakout - AnalogDescription: This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light... |
$3.50 |
|
Qwiic Arcade - RedDescription: According to some Sparkfun engineers, if you hold this Qwiic Arcade switch up next to your ear, you can hear the sounds of Pac-Man... |
$9.95 |
|
Qwiic Cable - 100mmDescription: This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be... |
$2.50 |
|
Qwiic Cable - 50mmDescription: This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be... |
$1.50 |
|
Raspberry Pi - 8GB SD CardDescription: This is an 8GB micro SDHC card that is pre-installed with the NOOBS operating system for the Raspberry Pi. NOOBS is actually a system... |
$12.95 |
|
RaspiRobot BoardDescription: The Raspberry Pi packs plenty of processing power in a small and inexpensive package and that makes it perfect for robot brains! The... |
$29.95 |
|
Replaced - Beefcake Relay Control KitRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: Your 5 volt system can wield... |
$7.95 |
|
Replaced - Big Easy DriverDescription: The Big Easy Driver, designed by Brian Schmalz, is a stepper motor driver board for bi-polar stepper motors up to 2A/phase. It is based... |
$22.95 |
|
Replaced - Bus PirateRetired: This product has been replaced by a new version. This page is for your reference only. Description: The Bus Pirate, created by Ian Lesnet... |
$29.95 |