Sparkfun
Product Image | Item Name | Price+ |
---|---|---|
XBee Explorer RegulatedDescription: The XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and... |
$9.95 |
|
Retired - Arduino MegaShield KitDescription: The Arduino Mega now has its very own prototyping shield! The MegaShield mates with the Arduino Mega board and gives the user a... |
$17.95 $10.77 Save: 40% off |
|
Arduino Pro Mini 328 - 3.3V/8MHzDescription: It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz... |
$10.95 |
|
Arduino Pro Mini 328 - 5V/16MHzDescription: It's blue! It's thin! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz... |
$10.95 |
|
Cable Carrier - 10x15mm (0.5m Length)Description: No, this isn’t a tank tread, this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at... |
$10.95 |
|
Retired - Resistor Kit - 1/4WRetired: This product is no longer available. This page is for your reference only. Please note, this item has been discontinued, and replaced with... |
$10.95 |
|
SparkFun Load Cell Amplifier - HX711Description: The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight.... |
$10.95 |
|
SparkFun MEMS Microphone Breakout - INMP401 (ADMP401)Description: This tiny breakout board features the ADMP401 MEMs microphone. One of the key advantages to this breakout and microphone is the bottom... |
$10.95 |
|
SparkFun WeevilEye - Beginner Soldering KitDescription Have you ever seen a Weevil? It’s a pretty under-appreciated beetle, so Sparkfun thought it deserved a kit. Okay, so we just kind of... |
$10.95 |
|
USB LiPoly Charger - Single CellDescription: If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The USB LiPo Charger is a basic charging... |
$14.95 $11.21 Save: 25% off |
|
Force Sensitive Resistor - SquareDescription: This is a force sensitive resistor with a square, 1.75x1.5", sensing area. This FSR will vary its resistance depending on how much... |
$11.25 |
|
LilyPad Simple PowerDescription: The LilyPad Simple Power is a simple e-textile board with a 500mA charge rate that lets you connect and charge a lipo battery and switch... |
$11.50 |
|
SparkFun Qwiic Keypad - 12 ButtonDescription: Keypads are very handy input devices, but who wants to tie up seven GPIO pins, wire up a handful of pull-up resistors, and write... |
$11.50 |
|
Breadboard Power Supply 5V/3.3VDescription: Here is a very simple breadboard power supply kit that takes power from a DC wall wart and outputs a selectable 5V or 3.3V regulated... |
$11.95 |
|
Replaced - Polymer Lithium Ion Batteries - 1000mAhThis part has been replaced by this 1000mah battery. Description: These are very slim, extremely light weight batteries based on the new Polymer... |
$11.95 |
|
Retired - Triple Axis Accelerometer Breakout - MMA7361Description: This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and... |
$11.95 |
|
SparkFun QwiicBus - EndPointDescription: The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of your I2C communication bus. The breakout uses... |
$11.95 |
|
SparkFun Sound DetectorDescription: The SparkFun Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not... |
$11.95 |
|
SparkFun Transceiver Breakout RS-485Description: This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a... |
$11.95 |
|
SparkFun ProtoShield KitDescription: The SparkFun ProtoShield Kit lets you customize your own Arduino shield using whatever circuit you can come up with and then test it to... |
$12.50 |
|
Unigeek - Unicorn Soldering Badge KitDescription: Get a little magical with your soldering skills! The Unigeek is a beginners soldering kit that teaches you the basics of PTH and SMD... |
$12.50 |
|
Raspberry Pi - 8GB SD CardDescription: This is an 8GB micro SDHC card that is pre-installed with the NOOBS operating system for the Raspberry Pi. NOOBS is actually a system... |
$12.95 |
|
Retired - SparkFun UV Sensor Breakout - ML8511Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal... |
$12.95 |
|
SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A)Description: Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same... |
$12.95 |
|
SparkFun Sound Detector (with Headers)Description The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not only... |
$13.25 |
|
Breadboard Power Supply USB - 5V/3.3VDescription: A very simple breadboard power supply kit that takes power from any USB port and outputs a fuse protected and regulated 3.3V. The .1"... |
$13.50 |
|
FTDI Basic Breakout - 5VDescription: This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with... |
$13.95 |
|
Heaterizer XL-3000 Heat GunDescription: The SparkFun Heaterizer XL-3000 heat gun is a handy tool that everyone should have. It's great for heat-shrink, melting things, and even... |
$13.95 |
|
SparkFun Breadboard Power Supply Stick - 5V/3.3VDescription: This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1"... |
$13.95 |
|
SparkFun FT231X BreakoutDescription: Introducing the SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board... |
$13.95 |
|
SparkFun Qwiic Single RelayDescription: Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or... |
$13.95 |
|
Solid State Relay KitDescription: A solid state relay (SSR) is just what it sounds like; an IC that acts like a mechanical relay. They allow you to control high-voltage... |
$19.95 $13.97 Save: 30% off |
|
Arcade Joystick - Short HandleDescription: 4-way Pacman type arcade joystick. Heavy duty design gives this joystick a great feel! Features: ABS plastic and solid alloy... |
$14.95 |
|
EasyDriver - Stepper Motor DriverDescription: The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V... |
$14.95 |
|
Load Cell - 10kg, Straight Bar with Hook (HX711)Description: This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal.... |
$14.95 |
|
MicroView - USB ProgrammerDescription: The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED... |
$14.95 |
|
MPL3115A2 Altitude/Pressure Sensor BreakoutDescription: Life has its ups and downs, so why not measure them? The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm... |
$14.95 |
|
Retired - Breadboard Power Supply Stick 5V/3.3VRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: This is a very simple board that... |
$14.95 |
|
Retired - Color Light Sensor Evaluation BoardDescription: The ADJD-S311-CR999 is a great little color light sensor. In fact, it's so little that it can be pretty difficult to play with, so we... |
$14.95 |
|
Retired - Disco - Digital MultimeterDescription: This is for all those starving students that need to buy their first good, low-cost multimeter. This meter has really impressive overall... |
$14.95 Max: 1 |
|
Retired - EasyDriver Stepper Motor DriverRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: The EasyDriver is a simple to... |
$14.95 |
|
Retired - EasyDriver Stepper Motor Driver v4Retired: This product has been replaced by the EasyDriver Stepper Motor Driver. This page is for your reference only. Description: The EasyDriver is... |
$14.95 |
|
Retired - EasyDriver v3 Stepper Motor DriverRetired: This product has been replaced by the EasyDriver Stepper Motor Driver. This page is for your reference only. Description: EasyDriver v3 is a... |
$14.95 |
|
Retired - FTDI Basic Breakout - 3.3VRetired: This version has been updated to a newer version FTDI Basic Breakout - 3.3V kit. This page is for your reference only. Description: This is... |
$14.95 |
|
Retired - LilyPad LiPowerDescription: A small, but very mighty power supply. This board was designed to be as small and inconspicuous as possible. The nice thing about... |
$14.95 |
|
Retired - LilyPad Power SupplyRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: A small, but mighty power supply.... |
$14.95 |
|
Retired - LilyPad Power SupplyDescription: A small, but mighty power supply. This board was designed to be as small and inconspicuous as possible. Pop in a AAA battery, flip the... |
$14.95 |
|
Retired - LilyPad Vibe BoardRetired: This version has been replaced by a newer version of the Vibe Board. This page is for your reference only. Description: Apply 5V and be... |
$14.95 |
|
Retired - LilyPad XBeeRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: The is a breakout board for the... |
$14.95 |
|
Retired - Triple Axis Magnetometer Breakout - HMC5883LDescription: This is a breakout board for Honeywell's HMC5883L, a 3-axis digital compass. Communication with the HMC5883L is simple and all done... |
$14.95 |