Sparkfun
Product Image | Item Name- | Price |
---|---|---|
SOIC to DIP Adapter 20-PinDescription: Low-cost basic SOIC break out boards. These are custom PCB boards that interface standard SOIC devices to standard .1" headers. 20-SOIC:... |
$3.95 |
|
Slide Potentiometer KnobDescription: This is the knob that connects to the linear slide potentiometer. Knob has a nice friction fit onto slide. Documents: Datasheet |
$0.95 |
|
Simon Says - Through-Hole Soldering KitDescription: This is the latest version of SparkFun's popular through-hole Simon Says Kit. They have made some changes to the board that should make... |
$28.95 |
|
Servo Extension Cable - Female to Female (shrouded)Description: This is a 12" servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the... |
$2.95 |
|
Serial Enabled 20x4 LCD - Black on Green 5VDescription: This is the latest evolution of Sparkfun's serial LCD. Included on a single board is a 20x4 LCD and an embedded circuit based around a... |
$29.95 |
|
Roving Networks RN-52 Audio Bluetooth BreakoutDescription: The RN-52 Bluetooth from Roving Networks is an audio module that makes it simple for you to create a hands free audio system for your... |
$49.95 |
|
Ribbon Crimp Connector - 6-pin (2x3, Female)Description: These 2x3 crimp connectors can be snapped onto 6-wire ribbon cable to make your own cable assemblies and keep your connections... |
$0.35 |
|
Ribbon Crimp Connector - 10-pin (2x5, Female)Description: These 2x5 crimp connectors can be snapped onto 10-wire ribbon cable to make your own cable assemblies and keep your connections... |
$0.50 |
|
RFID USB ReaderDescription: The RFID USB Reader is a simple to use, USB to serial base unit for the ID-2, ID-12, and ID-20 readers. Simply plug a reader into the... |
$24.95 |
|
RF Link Transmitter - 434MHzDescription: These wireless transmitters work with our 434MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to... |
$4.95 |
|
RF Link Transmitter - 315MHzDescription: These wireless transmitters work with our 315MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to... |
$4.95 |
|
RF Link Receiver - 4800bps (434MHz)Description: These wireless receivers work with our 434MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to... |
$5.95 |
|
RF Link Receiver - 4800bps (315MHz)Description: These wireless receivers work with our 315MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to... |
$5.95 |
|
Retired Bluetooth Mate SilverDescription: The Bluetooth Mate is very similar to our BlueSMiRF modem, but it is designed specifically to be used with Sparkfun's Arduino Pros and... |
$39.95 |
|
Retired - XBee Explorer USBRetired: This product has been replaced by the updated Xbee Explorer USB. This page is for your reference only. Description: This is a simple to use,... |
$24.95 |
|
Retired - XBee Explorer DongleRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: This is the Xbee Explorer Dongle... |
$24.95 |
|
Retired - Wall Charger - 5V USBRetired: This product has been replaced by the Wall Charger - 5V USB 1 AMP. This page is for your reference only. Description: High quality switching... |
$3.95 |
|
Retired - VoiceBox ShieldDescription: The VoiceBox Shield can be mounted on top of your Arduino USB Board or Minuino. The Voice Box Shield uses the SpeakJet chip to convert... |
$39.95 |
|
Retired - Voice Recorder Breakout - ISD1932Description: This is a breakout board for the ISD1932, a multiple-message record/playback device. This single chip can record up to 64 seconds worth... |
$14.95 |
|
Retired - Venus GPS Logger with SMA ConnectorReplacement: GPS-10920. The new version of this board is built with the Venus638FLPx-L, a more robust drop-in replacement for the Venus634LPx. This... |
$59.95 |
|
Retired - Triple Axis Magnetometer Breakout - HMC5883LDescription: This is a breakout board for Honeywell's HMC5883L, a 3-axis digital compass. Communication with the HMC5883L is simple and all done... |
$14.95 |
|
Retired - Triple Axis Accelerometer Breakout - MMA7361Description: This is a breakout board for Freescale's MMA7361L three-axis analog accelerometer. The sensor requires a very low amount of power and... |
$11.95 |
|
Retired - Triple Axis Accelerometer Breakout - MMA7260QDescription: Breakout board for the 3 axis MMA7260QT accelerometer from Freescale. Please view the datasheet for this impressive sensor! With a low... |
$19.95 |
|
Retired - Tool Kit - BeginnerRetired: This product has been replaced by a new version. This page is for your reference only. Description: This assortment of tools is great for... |
$34.95 |
|
Retired - Tilt-a-Whirl Breakout - RPI-1031Description: The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This... |
$5.95 |
|
Retired - Super Capacitor - 0.2F/3.3VDescription: This tiny surface mount capacitor has a total capacity of 0.2F, which is a lot for something so small. This small cap can be charged up... |
$1.95 |
|
Retired - SPI ShortcutDescription: The SPI Shortcut allows you to control SPI pins over USB, allowing for a virtual "SPI Terminal." Using basic serial commands you can... |
$24.95 |
|
Retired - SparkFun UV Sensor Breakout - ML8511Description: The ML8511 breakout is an easy to use ultraviolet light sensor. The MP8511 UV (ultraviolet) Sensor works by outputing an analog signal... |
$12.95 |
|
Retired - SparkFun Simon - Surface Mount Stenciling KitDescription: The Sparkfun Surface Mount Stenciling Simon Says kit is a great challenge to anyone with intermediate skills at soldering resulting in a... |
$9.95 |
|
Retired - SparkFun OpenLogNOTE: This product has been replaced by an updated version. Description: The SparkFun OpenLog is an open source data logger. Simple to use, simple... |
$24.95 |
|
Retired - SparkFun Inventor's Kit - v4.0Description: The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming... |
$99.95 |
|
Retired - SparkFun Inventor's Kit - V3.2Description: The SparkFun Inventor’s Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming... |
$99.95 |
|
Retired - SparkFun Bluetooth Modem - BlueSMiRF HIDDescription: The BlueSMiRF HID is essentially the same board as the BlueSMiRF Silver but the populated RN-42 comes loaded with the HID firmware. HID,... |
$24.95 |
|
Retired - Soldering Station Variable Temperature 50W - AnalogRetired: This product has been replaced by a newer version. This page is for your reference only. Description: This is a great step up from the basic... |
$49.95 |
|
Retired - Soldering Station Variable Temp. 50W - Analog (937B)Description: This soldering station is a great step up from the basic soldering station you picked up because your last one broke right in the middle... |
$39.95 |
|
Retired - Rotary DIP Switch - 16 PositionDescription: Rotary switches are nice for being able to select up to 16 different states in a small package. With only 6 pins (2 of which are... |
$2.95 |
|
Retired - RFID Reader BreakoutRetired: This product has been replaced by a newer version. This page is for your reference only. Description: This is a simple breakout board for... |
$0.95 |
|
Retired - Resistor Kit - 1/4WRetired: This product is no longer available. This page is for your reference only. Please note, this item has been discontinued, and replaced with... |
$10.95 |
|
Retired - Push Button 33mm - BlueDescription: This is a 33mm round momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing.... |
$0.95 |
|
Retired - Pro Micro - 5V/16MHzDescription: The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB... |
$24.95 |
|
Retired - Power Cell - LiPo Charger/BoosterRetired: Please note, this item has been discontinued, and replaced with a new version COM-14411 This page is for your reference only. Description:... |
$19.95 |
|
Retired - Polymer Lithium Ion Batteries - 20mAhRetired: This product is no longer available. This page is for your reference only. Description: This is an extremely tiny and light weight battery... |
$5.95 |
|
Retired - PicoBoardRetired: This product has been replaced by a new version. This page is for your reference only. Description: The PicoBoard allows you to create... |
$44.95 |
|
Retired - NCP1402-5V Step-Up BreakoutDescription: The NCP1402 is a 5V DC-DC converter. This breakout board will accept voltage inputs between 1 and 4 Volts and output a constant, low... |
$5.95 |
|
Retired - Muscle Sensor v3Retired: This product has been replaced by a new version. This page is for your reference only. Description: Granted, using our muscles to control... |
$26.95 |
|
Retired - MPR121 Capacitive Touch Sensor Breakout BoardDescription: This is a breakout board for Freescale's MPR121QR2. The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The... |
$9.95 |
|
Retired - MP3 Player ShieldRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: This new revision of the MP3... |
$39.95 |
|
Retired - MiniMoto - DRV8830 BreakoutDescription: The MiniMoto is a great little breakout for the DRV8830 I2C DC motor driver. The MiniMoto is great for driving most small robotics. With... |
$9.95 |
|
Retired - Makey Makey - Deluxe KitDescription: You may be the greatest living banana-pianist, but how will you ever know if you don't make yourself a banana piano? Good news, that... |
$59.95 |
|
Retired - Magnetic Snap 10mmRetired: This product is no longer available. This page is for your reference only. Description: A snap is fun, but a magnetic snap adds a whole new... |
$1.50 |