Your cart is empty

Breakouts



Product Image Item Name- Price
10-pin Socket/Socket IDC cable - 6"

10-pin Socket/Socket IDC cable - 6"

Description: This cable has 10 pins (2x5) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto either side,...
$2.00

Buy Now

10-pin Socket/Socket IDC cable - Short 1.5"

10-pin Socket/Socket IDC cable - Short 1.5"

Description: This cable has 10 pins (2x5) in 0.1"x0.1" spacing. This cable is used for chaining together 16x24 LED matrix panels. About 1.5" long...
$1.50

Buy Now

20mm Coin Cell Breakout w/On-Off Switch (CR2032)

20mm Coin Cell Breakout w/On-Off Switch (CR2032)

Description: Simple but effective - this sewable breakout board has a CR2032 coin cell battery holder soldered on, an on/off switch and 0.1" pitch...
$3.50

Buy Now

4-channel I2C-safe Bi-directional Logic Level Converter - BSS138

4-channel I2C-safe Bi-directional Logic Level Converter - BSS138

Description: Because the Arduino (and Basic Stamp) are 5V devices, and most modern sensors, displays, flash cards and modes are 3.3V-only, many...
$3.95

Buy Now

Adafruit 16-Ch. 12-bit PWM/Servo Driver - I2C - PCA9685

Adafruit 16-Ch. 12-bit PWM/Servo Driver - I2C - PCA9685

Description: You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to...
$14.95

Buy Now

Adafruit APDS9960 Prox., Light, RGB, Gesture Sensor - Qwiic

Adafruit APDS9960 Prox., Light, RGB, Gesture Sensor - Qwiic

Description: This breakout is chock full o' sensors! Add basic gesture sensing, RGB color sensing, proximity sensing, or ambient light sensing to...
$7.95

Buy Now

Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor

Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor

DESCRIPTION Bosch has stepped up their game with their new BME280 sensor, an environmental sensor with temperature, barometric...
$19.95

Buy Now

Adafruit DRV2605L Haptic Motor Controller

Adafruit DRV2605L Haptic Motor Controller

Description: The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for...
$7.99

Buy Now

Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board

Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board

Description: Spin two DC motors or step one bi-polar or uni-polar stepper with up to 1.2A per channel using the DRV8833. This motor driver chip is a...
$5.95

Buy Now

Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max

Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max

Description: Crank up your robotics with powerful Adafruit DRV8871 motor driver breakout board. This motor driver has a lot of great specs that make...
$7.75

Buy Now

Adafruit DS3231 Precision RTC Breakout

Adafruit DS3231 Precision RTC Breakout

Description: The datasheet for the DS3231 explains that this part is an "Extremely Accurate I²C-Integrated RTC/TCXO/Crystal". And, hey, it does...
$17.95

Buy Now

Adafruit I2C Non-Volatile FRAM Breakout - 256Kbit / 32KByte

Adafruit I2C Non-Volatile FRAM Breakout - 256Kbit / 32KByte

FRAM, or Ferroelectric Ram, is the coolest new data storage method that all the fashion magazines are talking about. Oh wait, no that's quilted...
$9.95

Buy Now

Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g)

Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g)

Description: The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an...
$5.95

Buy Now

Adafruit LTC4311 I2C Ext. / Active Term. - STEMMA QT / Qwiic

Adafruit LTC4311 I2C Ext. / Active Term. - STEMMA QT / Qwiic

Description: I2C stands for Inter-Integrated-Circuit communications, it's meant for short distances on a PCB or subassembly. But, hey, we're...
$8.25

Buy Now

Adafruit MCP23017 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Adafruit MCP23017 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Description: Adafruit has gotten a lot of requests for a MCP23017 breakout and we’ve always sorta been like “ehh why not just use the DIP...
$6.95

Buy Now

Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI

Adafruit MPRLS Ported Pressure Sensor Breakout - 0 to 25 PSI

Description: We stock a few barometric pressure sensors, great for altitude and weather measurements. This pressure sensor is special because it...
$14.95

Buy Now

Adafruit Parts Pal

Adafruit Parts Pal

DESCRIPTION LEDs and passives and transistors and switches and op-amps oh my! The Adafruit Parts Pal is the great companion for an entry-level maker...
$19.95

Buy Now

Adafruit PCF8574 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Adafruit PCF8574 I2C GPIO Expander Breakout - STEMMA QT / Qwiic

Description: xpand your project possibilities, with the Adafruit PCF8574 GPIO Expander Breakout - an affordable 8 channel I2C expander. GPIO...
$5.55

Buy Now

Adafruit QT Py ESP32-S2 WiFi Dev Board with STEMMA QT

Adafruit QT Py ESP32-S2 WiFi Dev Board with STEMMA QT

Description: What has your favorite Espressif WiFi microcontroller, comes with our favorite connector - the STEMMA QT, a chainable I2C port, and has...
$12.95

Buy Now

Adafruit Qwiic / Stemma QT 5 Port Hub

Adafruit Qwiic / Stemma QT 5 Port Hub

Description: Qwiic, or STEMMA QT, is a very efficient way to quickly prototype an idea, but a lot of Qwiic/Stemma QT driver boards only have one...
$2.95

Buy Now

Adafruit Si5351A Clock Generator Breakout Board - 8KHz to 160MHz

Adafruit Si5351A Clock Generator Breakout Board - 8KHz to 160MHz

Description: Never hunt around for another crystal again, with the Si5351A clock generator breakout from Adafruit! This chip has a precision 25MHz...
$8.95

Buy Now

Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board

Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board

Description: Spin two DC motors, step one bi-polar or uni-polar stepper, or fire off two solenoids with 1.2A per channel using the TB6612. These are...
$7.25

Buy Now

Adafruit TPL5110 Low Power Timer Breakout

Adafruit TPL5110 Low Power Timer Breakout

Description: With some development boards, low power usage is an afterthought. Especially when price and usability is the main selling point. So what...
$5.95

Buy Now

Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates v3

Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates v3

New! Version 3 comes with the latest module which has external antenna support and Pulse-Per-Second output   We carry a few different GPS modules...
$35.95

Buy Now

Adafruit Ultimate GPS with USB - 66 channel w/10 Hz updates

Adafruit Ultimate GPS with USB - 66 channel w/10 Hz updates

Description: The Ultimate GPS module you know and love has a glow-up to let it be easily used with any computer, not just microcontrollers! With...
$29.95

Buy Now

Adafruit Universal Thermocouple Amplifier MAX31856 Breakout

Adafruit Universal Thermocouple Amplifier MAX31856 Breakout

Description: Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference, as well as calculations to handle any...
$17.95

Buy Now

Adafruit USB Isolator - 100mA Isolated Low/Full Speed USB

Adafruit USB Isolator - 100mA Isolated Low/Full Speed USB

Description: Have some USB logic analyzer, multimeter or oscilloscope and bumping up against the frustration of a shared earth ground? The Offspring...
$34.95

Buy Now

Adjustable breadboard power supply - v1.2

Adjustable breadboard power supply - v1.2

This project details the design of a very low dropout adjustable power supply. A good power supply is essential to electronic projects. While there...
$15.00

Buy Now

ADS1115 16-Bit ADC - 4 Ch Prog Gain Qwiic

ADS1115 16-Bit ADC - 4 Ch Prog Gain Qwiic

Description: For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit...
$14.95

Buy Now

Analog UV Light Sensor Breakout - GUVA-S12SD

Analog UV Light Sensor Breakout - GUVA-S12SD

Description: Extend your light-sensing spectrum with this analog UV sensor module. It uses a UV photodiode, which can detect the 240-370nm range of...
$6.50

Buy Now

Electret Microphone Amplifier - MAX4466 with Adjustable Gain

Electret Microphone Amplifier - MAX4466 with Adjustable Gain

Description Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a...
$6.95

Buy Now

Electret Microphone Amplifier - MAX9814 with Auto Gain Control

Electret Microphone Amplifier - MAX9814 with Auto Gain Control

DESCRIPTION : Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes...
$7.95

Buy Now

Extra-long force-sensitive resistor (FSR) - Interlink 408

Extra-long force-sensitive resistor (FSR) - Interlink 408

FSRs are sensors that allow you to detect physical pressure, squeezing and weight. They are simple to use and low cost. This sensor is a Interlink...
$22.95

Buy Now

FTDI Friend + extras - v1.0

FTDI Friend + extras - v1.0

Note: These use genuine FTDI chips, Adafruit either purchase them or they are manufactured to our specifications with the requirement of genuine FTDI...
$14.75

Buy Now

i2c / SPI character LCD backpack

i2c / SPI character LCD backpack

Description: LCD backpacks reduce the number of pins needed to connect to an LCD. LCDs are a fun and easy way to have your microcontroller project...
$9.95

Buy Now

INA169 Analog DC Current Sensor Breakout - 60V 5A Max

INA169 Analog DC Current Sensor Breakout - 60V 5A Max

Description This breakout board will solve all your current-monitoring problems. Instead of struggling with a multimeter, you can just use the handy...
$9.95

Buy Now

Large Enclosed Piezo Element w/Wires

Large Enclosed Piezo Element w/Wires

This large (30mm diameter) piezo element is nicely enclosed with mounting holes so you can attach easily. Piezo elements convert vibration to voltage...
$1.00

Buy Now

Magstripe Reader - PS/2 Interface - 3 Tracks (1&2&3)

Magstripe Reader - PS/2 Interface - 3 Tracks (1&2&3)

Decode what's hidden on your credit cards, or use it for an access system - this mag-stripe card reader can decode all three tracks! We like this...
$59.95

Buy Now

MCP4725 Breakout Board - 12-Bit DAC w/I2C Interface

MCP4725 Breakout Board - 12-Bit DAC w/I2C Interface

Description: Your microcontroller probably has an ADC (analog -> digital converter) but does it have a DAC (digital -> analog converter)??? Now it...
$5.95

Buy Now

MicroSD card breakout board+

MicroSD card breakout board+

Description: Not just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. Onboard 5v->3v regulator provides...
$7.99

Buy Now

MiFare Classic (13.56 MHz) tag assortment - 1KB

MiFare Classic (13.56 MHz) tag assortment - 1KB

One of each of the following Mifare Classic 1K tags - 5 in total! Credit card size 1" diameter 'laundry' clear tag 1" diameter 'laundry' white...
$10.00

Buy Now

PN532 NFC/RFID controller breakout board - v1.3

PN532 NFC/RFID controller breakout board - v1.3

The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all,...
$39.95

Buy Now

Pogo Pin Probe Clip

Pogo Pin Probe Clip

The Pogo Pin Probe Clip is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with a...
$3.00

Buy Now

SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!

SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!

Description: Beguiled by a fancy new chip that is only available in a SOIC or (T)SSOP pinout? This breakout PCB set will make your life much much...
$4.25

Buy Now

Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070

Standalone 5-Pad Capacitive Touch Sensor Breakout - AT42QT1070

Description: This breakout board is the simplest way to create a project with mutiple capacitive touch sensors. No microcontroller is required here -...
$7.50

Buy Now

Standalone Toggle Capacitive Touch Sensor Breakout - AT42QT1012

Standalone Toggle Capacitive Touch Sensor Breakout - AT42QT1012

Description: This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is...
$5.95

Buy Now

Stereo 20W Class D Audio Amplifier - MAX9744

Stereo 20W Class D Audio Amplifier - MAX9744

Description: Pump up the volume with this 20W stereo amplifier! This slim little board has a class D amplifier onboard that can drive 2 channels of...
$19.95

Buy Now

SWD (2x5 1.27mm) Cable Breakout Board

SWD (2x5 1.27mm) Cable Breakout Board

DESCRIPTION This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for...
$1.95

Buy Now

TCA9548A I2C Multiplexer

TCA9548A I2C Multiplexer

Description: You just found the perfect I2C sensor, and you want to wire up two or three or more of them to your Arduino when you realize "Uh oh,...
$6.99

Buy Now

Teensy (ATmega32u4 USB dev board) 2.0 - ATmega32u4

Teensy (ATmega32u4 USB dev board) 2.0 - ATmega32u4

DESCRIPTION : The Teensy 2.0 is a complete USB-based microcontoller development system, in a very small footprint! All programming is done via the...
$19.95

Buy Now


wabusiness template