Sparkfun
Product Image | Item Name | Price- |
---|---|---|
LilyPad Light SensorDescription: This is a simple to use light sensor that outputs an analog value from 0 to 5V. With exposure to daylight, this sensor will output 5V.... |
$7.95 |
|
LilyPad Tri-Color LEDDescription: Blink any color you need! Use the Tri-Color LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can... |
$7.95 |
|
Replaced - Beefcake Relay Control KitRetired: This product has been replaced by the a newer version. This page is for your reference only. Description: Your 5 volt system can wield... |
$7.95 |
|
SparkFun Big Red Box Proto BoardDescription: The SparkFun Big Red Box Proto Board is a large, custom made PCB that has been specifically designed to be used with and installed into... |
$7.95 |
|
SparkFun Capacitor KitDescription: This is a kit that provides you with a basic assortment of capacitors to start or continue your electronics tinkering. No more looking... |
$7.95 |
|
SparkFun RGB Light Sensor - ISL29125Description: If you’ve had ideas for a project that depends on the ability to sense different spectrums of visible light and react based on those... |
$7.95 |
|
SparkFun Soil Moisture Sensor (with Screw Terminals)Description: The SparkFun Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture... |
$7.95 |
|
SparkFun Proximity Sensor Breakout - 20cm, VCNL4040 (Qwiic)Description: The SparkFun Proximity Sensor Breakout is a simple IR presence and ambient light sensor utilizing the VCNL4040. This type of sensor is... |
$7.75 |
|
SparkFun LED Array - 8x7Description: The SparkFun LED Array is a set of 56 red LEDs arranged in a nice 8x7 grid. This little board requires eight pins while the library... |
$8.95 $7.61 Save: 15% off |
|
Alligator Clip with Pigtail (10 Pack)Description This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a hookup pigtail on the other. Alligator clips... |
$6.95 |
|
Force Sensitive Resistor - SmallDescription: This is a small force sensitive resistor. It has a 0.16" (4 mm) diameter active sensing area. This FSR will vary its resistance... |
$6.95 |
|
Force Sensitive Resistor 0.5"Description: This is a force sensitive resistor with a round, 0.5" diameter, sensing area. This FSR will vary its resistance depending on how much... |
$6.95 |
|
LilyPad E-Sewing ProtoSnapDescription The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e-sewing circuits before crafting your... |
$6.95 |
|
MOSFET Power ControllerDescription: MOSFETs are awesome. They're like a switch that you flip electronically! This MOSFET Power Controller makes it easy to switch a battery... |
$6.95 |
|
Pi WedgeDescription: This is the Pi Wedge, a small board that connects to the Raspberry Pi’s 26-pin GPIO connector, and breaks the pins out to... |
$6.95 |
|
Polymer Lithium Ion Batteries - 110mAhDescription: This is a very small, extremely light weight batty based on the new Polymer Lithium Ion chemistry. This is the highest energy density... |
$6.95 |
|
Retired - LED RingCoder Breakout - RGBDescription: This breakout board gives you a pretty slick interface for rotary input. Since rotary encoders turn continuously it can be difficult to... |
$6.95 |
|
SparkFun Inventor's Kit - Carrying CaseDescription: This is the version three iteration of the SparkFun Inventor’s Kit (SIK) Carrying Case. This spiffy carrying case features seven... |
$6.95 |
|
SparkFun Qwiic HAT for Raspberry PiDescription: The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using... |
$6.95 |
|
LilyPad SimpleSnap ProtoboardDescription: The LilyPad SimpleSnap Protoboard is a new, easy way to create e-textiles projects with LilyPad that are modular and can be disassembled... |
$6.50 |
|
SparkFun RedBot Sensor - Mechanical BumperDescription: These simple switches are the Mechanical Bumper sensor for the SparkFun RedBot, giving you the ability to detect a collision before it... |
$6.50 |
|
SparkFun Ambient Light Sensor - VEML6030 (Qwiic)Description: Looking for an option to sense ambient light? The VEML6030 Qwiic board is a great starter option. The VEML6030 is a high accuracy... |
$6.25 |
|
Analog/Digital MUX BreakoutDescription: This is a breakout board for the very handy 16-Channel Analog/Digital Mulitplexer/Demultiplexer CD74HC4067. This chip can be used to... |
$5.95 |
|
Keypad - 12 ButtonDescription: A basic 12 button keypad for user input. The buttons are setup in a matrix format. This allows a microcontroller to 'scan' the 7 output... |
$5.95 |
|
LilyPad Pixel BoardDescription: We know you love adding color to your e-textiles, adding the LilyPad Pixel Board to your project will only make it better. The pixel... |
$5.95 |
|
Piezo Vibration Sensor - Large with MassDescription: This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is... |
$5.95 |
|
Retired - "Uh-oh" Battery Level Indicator KitDescription: Under-powering a digital device can sometimes have pretty nasty consequences. Brown-out conditions can cause memory to get written or... |
$5.95 |
|
Retired - NCP1402-5V Step-Up BreakoutDescription: The NCP1402 is a 5V DC-DC converter. This breakout board will accept voltage inputs between 1 and 4 Volts and output a constant, low... |
$5.95 |
|
Retired - Polymer Lithium Ion Batteries - 20mAhRetired: This product is no longer available. This page is for your reference only. Description: This is an extremely tiny and light weight battery... |
$5.95 |
|
Retired - Tilt-a-Whirl Breakout - RPI-1031Description: The RPI-1031 tilt sensor is capable of sensing a change in orientation in four different directions: forward, back, left or right. This... |
$5.95 |
|
RF Link Receiver - 4800bps (315MHz)Description: These wireless receivers work with our 315MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to... |
$5.95 |
|
RF Link Receiver - 4800bps (434MHz)Description: These wireless receivers work with our 434MHz transmitters. They can easily fit into a breadboard and work well with microcontrollers to... |
$5.95 |
|
SparkFun Cerberus USB Cable - 6ftDescription: You've got the wrong USB cable. It doesn't matter which one you have, it's the wrong one. But what if you could have the right one? What... |
$5.95 |
|
SparkFun Level Shifting microSD BreakoutDescription: The SparkFun Level Shifting microSD Breakout is quite similar to the SparkFun microSD Transflash Breakout, but with the included level... |
$5.95 |
|
SparkFun MOSFET Power Control KitDescription: This is the SparkFun MOSFET Power Control Kit, a breakout PTH soldering kit for for the RFP30N06LE N-Channel MOSFET. This kit is... |
$5.95 |
|
Wall Adapter Power Supply - 12VDC 600mADescription: This is a high quality AC to DC 'wall wart' which produces a regulated output of 12VDC at up to 600mA. These are switch mode power... |
$5.95 |
|
LilyPad Protoboard LargeDescription: This is a large board for prototyping through hole components with the LilyPad system. There are an array of pins all shorted together... |
$6.95 $5.91 Save: 15% off |
|
LilyPad Temperature SensorDescription: Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output... |
$5.50 |
|
Opto-isolator BreakoutDescription: This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a... |
$5.50 |
|
SparkFun Basic Flashlight Soldering KitDescription: Are you new to soldering and want to learn the basics with one easy kit? This Flashlight Soldering Kit is an easy to assemble soldering... |
$5.50 |
|
SparkFun micro:bit BreakoutDescription: The SparkFun micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform... |
$5.50 |
|
SparkFun Qwiic EEPROM Breakout - 512KbitDescription: The SparkFun Qwiic EEPROM Breakout is a simple and cost effective option to add some extra storage space to any project. With 512... |
$5.50 |
|
SparkFun Solder-able BreadboardDescription: This is the SparkFun Solderable Breadboard. A bare PCB that is the exact size as our regular breadboard with the same connections to... |
$5.50 |
|
LilyPad BuzzerDescription: This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the... |
$5.25 |
|
SparkFun Ambient Light Sensor Breakout - TEMT6000Description: Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don’t. Sensor acts like a transistor - the... |
$5.25 |
|
Button Pad 2x2 - Breakout PCBDescription: This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered... |
$4.95 |
|
High Temperature Adhesive Tape - (1cm, 33m)Description: This is a 33 meter roll of polyimide tape. This tape is a fantastic insulator, like electrical tape, but it can withstand temperatures... |
$4.95 |
|
LilyPad LED Green (5 pieces)Description: Here is a simple 5 pack of green LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable... |
$4.95 |
|
LilyPad LED Yellow (5 pieces)Description: Here is a simple 5 pack of yellow LEDs for LilyPad, or whatever else you can dream up. Light up the night! LilyPad is a wearable... |
$4.95 |
|
Piezo Vibration Sensor - LargeDescription: This basic piezo sensor is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is... |
$4.95 |