SpikenzieLabs
Product Image | Item Name | Price- |
---|---|---|
64 Button ShieldDescription: The 64 Button Shield expands the capabilities of your Arduino to a whole new world. Imagine connecting 64 buttons to an Arduino! The 64... |
$22.95 |
|
Sippino™ USB - KitDescription: The SpikenzieLabs Sippino USB is the newest member of our very popular Sippino family of Arduino compatible boards. The Sippino USB adds... |
$22.95 |
|
SpikenzieLabs LCD Interface with Display - AssembledDescription: The SpikenzieLabs LCD Interface (MPTHv3) is our newest LCD Interface, based on the MPTH, this version has digital brightness control,... |
$20.00 |
|
Dice Kit - BlueDescription: The Dice Kit is a deluxe electronic die. To use it, tap it on a table and with each tap the you are "rolling" the dice. Each tap... |
$19.95 |
|
Dice Kit - GreenDescription: The Dice Kit is a deluxe electronic die. To use it, tap it on a table and with each tap the you are "rolling" the dice. Each tap... |
$19.95 |
|
Dice Kit - RedDescription: The Dice Kit is a deluxe electronic die. To use it, tap it on a table and with each tap the you are "rolling" the dice. Each tap... |
$19.95 |
|
Retired - I2C / SPI LCD Interface - I2C Version - ASSEMBLEDRetired: This version has been replaced by the I2C Interface v3. This page is for your reference only. Convert your 14 or 16 pin parallel interface... |
$19.95 |
|
The Ornaments (2 pack)Description: The Ornaments (2 pack) is a kit containing two easy to solder Christmas tree ornaments. Once soldered, press the button and it will play... |
$19.95 |
|
Drum Kit - KitThe Drum Kit - kit is a kit that contains the electronics that allows you to make a drum kit with your Arduino. Find the full instructions at the... |
$18.95 |
|
RCDC KitDescription: The RCDC board lets you control a small DC motor with either an RC receiver or an Arduino running the servo library. Features: Power LED... |
$18.95 |
|
The Telegraph Key KitDescription: This is the laser cut acrylic SpikenzieLabs Telegraph key. It is the same one that is included in our Telegraph Decoder Kit. Now, due to... |
$18.95 |
|
The Useless Machine PARTS ONLY KitThis kit is the internal mechanical and switching parts needed to for you to build a custom Useless Machine of your own design. We have done the... |
$18.00 |
|
Sippino ™ 328 - KitDescription: The Sippino™ 328 is an Arduino clone which you can plug right into your solderless breadboard. This Sippino 328 version comes with... |
$17.25 |
|
Basic CounterDescription: The Basic Counter is a simple and fun electronics kit that you can use to build a counter that can count up to 9999. How many times has... |
$16.95 |
|
Retired - MPTH - KitRetired: This product has been replaced by the SpikenzieLabs LCD Interface (MPTH v3). This page is for your reference only. Description: The MPTH is... |
$16.95 |
|
Retired - Sippino™ - KitRetired: This product has been replaced by the Sippino 328. This page is for your reference only. Description: The Sippino™ is an Arduino clone... |
$16.95 |
|
Retired - Message Pump Serial & I2CRetired: This product has been replaced by the MPTH (Message Pump Through Hole) Kit or Assembled. This page is for your reference only. This version... |
$15.95 |
|
SpikenzieLabs LCD Interface Kit (MPTH v3)Description: The SpikenzieLabs LCD Interface (MPTHv3) is our newest LCD Interface, based on the MPTH, this version has digital brightness control,... |
$15.95 |
|
I2C LCD Interface v3 - AssembledDescription: This is the newest version of our basic I2C LCD interfaces. This version is smaller than ever and includes software controllable LCD... |
$15.75 |
|
Solder:Time - Replacement Electronics PackThis is the replacement electronics pack for the Solder:Time Watch Kit. Includes the PCB, PIC & RTC Dips, Crystal, Button, Resistors, Capacitors,... |
$15.00 |
|
Solder:Time - Replacement Housing & ScrewsThis is the replacement plastics kit for our Solder : Time Watch. Not needed very often, however we have been asked on occasion for a replacement... |
$15.00 |
|
Minuino - KitThe Minuino is an Arduino clone. Our objective with the Minuino was to make a minimal part, cost, and sized Arduino clone. The Minuino works with... |
$14.95 |
|
Robot Blinky Badge BundleDescription: The SpikenzieLabs Robot Blinky Badge Bundle is a kit containing two learn to solder Robot Blinky Badges. Also contains ten huge 10mm... |
$14.95 |
|
The Musixel (Board only)Description: The Musixel adds color to your music. Attach it to your music source (MP3 player, phone, computer, stereo etc…) and the Musixel will... |
$14.95 |
|
The Shield Dock ™Description: How versatile can a prototyping shield be? The Shield Dock is a prototyping shield the can be used many different ways. The idea for the... |
$14.95 |
|
Micro USB FTDI BuddyDescription: The SpikenzieLabs Micro USB FTDI Buddy is our new USB to serial UART that uses FTDI's new FT230X chips. The FT230X is a small pin count... |
$12.95 |
|
Retired - I2C / SPI Interface - I2C Version - KITRetired: This version has been replaced by the I2C Interface v3 kit. This page is for your reference only. This kit lets you convert your 14 or 16... |
$12.95 |
|
The Ornament - GreenDescription: The Ornament - Green is a kit containing an easy to solder Christmas tree ornament. Once soldered, press the button and it will play an... |
$12.95 |
|
The Ornament - RedDescription: The Ornament - Red is a kit containing an easy to solder Christmas tree ornament. Once soldered, press the button and it will play an... |
$12.95 |
|
LCD Stand - For 128x64 DisplayLaser cut acrylic LCD display stand. This model also includes the extra base to position the LCD at a better viewing angle. The front and back panels... |
$11.95 |
|
Wrap It Up Box - Front Message PanelThis is laser cut and back etched 1/8" thick translucent acrylic panel. It is used in the Wrap It Up Box. Normally it will have "WRAP IT UP" etched... |
$10.95 |
|
Prototino ™ - PCB onlyThe Prototino™ is an Arduino clone with a built in prototyping area. Designed to make a permanent version of your project once you have... |
$10.45 |
|
4 Digit 7-Segment Breakout KitDescription: The this is a break out for a four digit seven segment LED display (Similar to this one). This kit allows you to easily hook-up the LED... |
$9.95 |
|
Blinky Holiday TreeDescription: This is a basic easy to build electronics kit that blinks LEDs. Built around laser cut and etched acrylic this tree really catches... |
$9.95 |
|
Blinky Jacko The Jack-O-LanternDescription: This is a basic easy to build electronics kit that blinks bright orange LEDs. Built around laser cut and etched acrylic this... |
$9.95 |
|
Blinky The SnowmanDescription: This is a basic easy to build electronics kit that blinks LEDs. Built around laser cut and etched acrylic this snowman really catches... |
$9.95 |
|
DKKAI RoadieDescription: The DKKAI Roadie is an add on for the Drum Kit Kit AI. It allows you to change the MIDI notes associated with your drum pads without the... |
$9.95 |
|
Happy New Year 2020 Blinky Badge KitDescription: This is a basic easy to build electronics kit that blinks LEDs. Built around laser cut and etched acrylic this "Happy 2020 Badge" really... |
$9.95 |
|
LCD Stand - CurvedLaser cut acrylic LCD display stand. Comes with a set of four nuts and bolts to connect an LCD. The mounting holes are spaced to fit either the 1x16... |
$9.95 |
|
LCD Stand - SandwichLaser cut acrylic LCD display stand. This model also includes the extra base to position the LCD at a better viewing angle. The front and back panels... |
$9.95 |
|
Solder Spool Holder - KITSolder spool holder kit , made from laser cut acrylic. Great for clearing up your work table and getting your solder under-control. This holder will... |
$9.95 |
|
SpikenzieLabs MugDescription: The SpikenzieLabs Mug. Well, it is a mug. You are a geek and we all know it. Drink it up! Features: Ceramic caffeine dispenser Nice... |
$9.95 |
|
SPLixel Basic - RGB LED ControllerDescription: The SPLixel Basic is a serial to WS281x (WS2812 / WS2812B) LED driver. Running the WS281x style LEDs requires precise and fast timing.... |
$9.95 |
|
The Useless Machine Counter Upgrade KitThe Useless Machine Counter Upgrade Kit If you already have one of our Useless Machines, and you would like to upgrade it to be a Useless Machine... |
$9.95 |
|
I2C LCD Interface v3 - KitDescription: This is the newest kit version of our basic I2C LCD interfaces. This version is smaller than ever and includes software controllable LCD... |
$9.75 |
|
ATmega 32U4 Basic Breakout BoardDescription: This is a breakout board for the ATmega32U4. This is the same chip that is used on the new Arduino Leonardo. All pins of the TQFP are... |
$8.95 |
|
ATmega 328P-AU Basic Breakout BoardDescription: This is a breakout board for the ATmega 328P-AU. This is the same chip that is used on the Solder : Time II Watch. Use this breakout to... |
$6.95 |
|
Button StripDescription:The Button Strip was specially designed to work with our 64 Button Shield. With the Button Strip, you can quickly connect any number of... |
$6.95 |
|
SPLixel Single RGB LEDs (5 Pack)Description: The SPLixel Single is a single WS2812B addressable RGB LED mounted to a tiny PCB. Each PCB is a super small .36x.46"! The WS2812B LEDs... |
$6.95 |
|
SPLixel Strip-8 - RGB LED StripDescription: The SPLixel Strip-8 is a set of eight WS2812B individually addressable LEDs mounted onto a PCB. The the entire strip is almost 4" long.... |
$6.95 |